Jawdah Industrial Co. Ltd.

Access Panels · 40x40 cm

Wall Access Door, Automatic Lock – 40x40 cm

This is Jawdah's Wall Access Door in 40x40 cm with an automatic lock, a framed opening that gives access to services behind a wall.

Size
40x40 cm
Lock
Automatic Lock
Frame
AA6063 aluminium, 1.2 mm
Gypsum partition access door, automatic lock, 40 × 40 cm, aluminium frame, door open

Overview

Quick answer

The 40x40 Wall Access Door is an aluminium-framed door set into a wall so that pipes, valves or cables behind it can be reached. Jawdah's data sheet lists 40x40 as a standard size, with an AA6063 aluminium alloy frame 1.2 mm thick, a concealed touch latch standard on all doors, and a removable door panel held by a safety cable.

Overview

About Wall Access Door, Automatic Lock – 40x40 cm

Valves, meters and cable junctions are often boxed in behind a finished wall, and the question is how to reach them later without breaking the surface. Jawdah's Wall Access Door answers that with a framed 40x40 cm opening and an automatic lock. It is the only size in Jawdah's product list for this wall door, and the datasheet treats it as a standard size.

The door opens on a concealed touch latch, which Jawdah's data sheet describes as standard on all doors. With no visible lock on the face, the door sits quietly in the wall finish until it is pressed. The door panel is removable and stays tethered to the frame by a safety cable.

Frame data from the datasheet: aluminium alloy AA6063, citing BS EN 573-3, BS EN 775-2 and BS EN 775-9, with a thickness of 1.2 mm. The finish is mill finish powder coating or white electrostatic powder coating.

Unlike the ceiling panels in the same family, this is a wall product and is listed in one size only. The datasheet does not state a fire or acoustic rating for the panel; if the wall carries such a requirement, it is confirmed with the quotation, together with the wall build-up the frame must suit.

This page covers the single listed size, 40x40, with the automatic lock. Confirm that the opening reaches every valve or connection behind the wall, and send the wall type and thickness with the enquiry so Jawdah can confirm the frame suits it. If the location needs a ceiling opening instead, the aluminium strip ceiling access panels are the related range.

Types

Sizes and variants

The 40x40 cm door is the only size listed for this product.

Applications

Where it is used

The datasheet lists a wide range of application areas for access panels, including:

  • Typical use: reaching valves and pipe connections boxed in behind walls in halls
  • Wall access to cable junctions in computer rooms and utility rooms
  • Service points behind hospital walls that maintenance staff open regularly
  • Shop walls hiding meters or connections that must stay reachable

Installation

Installation notes

Set out the opening for the 40x40 cm panel in the drywall framing and keep the services behind it within reach. Fixing details are not given in the supplied datasheet; follow the instructions supplied with the order.

  • Keep the safety cable attached when the door is removed
  • Do not paint over the latch or the door gap

Technical

Closer look

Approved photography of the product and its finish.
Gypsum partition access door installed flush in a finished wall

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Wall Access Door, Automatic Lock – 40x40 cm: recorded data
PropertyValueSource
Size40x40 cmJawdah product list
LockAutomatic LockJawdah product list
Standard size in datasheetYesDatasheet
Frame materialAluminium Alloy AA6063 (BS EN 573-3, BS EN 775-2, BS EN 775-9)Datasheet
Thickness1.2 mmDatasheet
Frame finishMill finish powder coating; electrostatic powder coating, whiteDatasheet
LatchConcealed touch latch, standard on all doorsDatasheet
Door panelRemovable, with safety cableDatasheet
Fire or acoustic rating of the panelNot specified in the supplied datasheetDatasheet

Key facts

  1. Wall Access Door, Automatic Lock, 40x40 cm is listed under Jawdah Access Panels.
  2. Use: access to services through drywall walls and partitions.
  3. Frame: aluminium alloy AA6063, 1.2 mm, white powder coating.
  4. Standard datasheet size.
  5. No other sizes listed.

RFQ / BOQ checklist

  • Panel type, lock and size (40x40 cm)
  • Ceiling or wall type and board
  • Quantity per size
  • Frame finish required
  • Location (wet area, corridor, plant room)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Jawdah's product list shows the automatic-lock Wall Access Door in 40x40 cm, and the datasheet lists 40x40 as a standard size. Other sizes are not listed on this page.

  • By a concealed touch latch, which the datasheet states is standard on all doors. The door panel can then be removed and remains held by a safety cable.

  • The supplied datasheet does not give a fire or acoustic rating for the panel. If your wall needs one, include it in the enquiry and Jawdah confirms what applies with the quotation.

Next step

Request a quotation for the 40x40 cm wall access door

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.