Ceiling Metal Profiles
L-Angle – Ceiling Metal Profile
The L-Angle is the galvanised steel perimeter profile fixed to the walls at ceiling level, giving the edge of a gypsum ceiling its support line.
- Sizes
- 22 to 24
- Material
- Galvanised steel
- Length
- 3000 mm
Products in this range
Quick answer
Jawdah's L-Angle is an L-shaped galvanised steel profile fixed to the surrounding walls at the height of the suspended ceiling. It defines the ceiling perimeter. Jawdah lists sizes 22 and 24, and both appear in the datasheet, as 22x22 mm and 24x24 mm sections, with steel from 0.35 up to 0.9 mm and a 3000 mm standard length.
Overview
About L-Angle – Ceiling Metal Profile
Where a suspended ceiling meets a wall, it needs a straight, level edge member. The L-Angle provides it: a simple right-angle profile screwed to the wall at ceiling height. Jawdah lists it in sizes 22 and 24, and unlike some ceiling profiles, both sizes have a matching section in the datasheet, which makes specification straightforward.
An L-Angle is a perimeter member. It runs around the room on the wall face, set at the finished ceiling level, and marks the line the ceiling edge follows. It is one of two perimeter angles in Jawdah's ceiling profiles, the other being the W-Angle.
Both listed sizes are covered by the drywall suspension datasheet: size 22 matches a 22x22 mm section and size 24 matches a 24x24 mm section. Steel thickness runs from 0.35 up to 0.9 mm, with other thicknesses available on request, and the material is hot-dip galvanised steel complying with ASTM A653M.
L-Angles come in 3000 mm standard lengths. The datasheet's raw-material entries give BS 476 Part 6 – 1989 for fire, a Class 1 surface flame spread to BS 476 Part 7 – 1997, and EN ISO 6270-2 for humidity.
For the ceiling edge, the choice is between the L-Angle and the W-Angle; the C-Channel and furring channel form the grid inside the room. Choose between the 22x22 mm and 24x24 mm L-Angle according to the ceiling detail, and confirm steel thickness with Jawdah when ordering.
Types
Sizes and variants
Sizes with their own page: L-Angle 22 and L-Angle 24.
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard, in:
- Perimeter edge of suspended gypsum board ceilings, fixed to the surrounding walls
- Edge support where a drywall ceiling bulkhead meets a wall
- Wall-side line for level setting-out of a ceiling grid
Installation
Installation notes
Spans, spacings and heights are not given in the supplied datasheet; they come from the system design and are confirmed with Jawdah. Store profiles dry and wear eye protection when cutting metal.
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Listed sizes | 22, 24 | Jawdah product list |
| Datasheet sections | 22x22 mm, 24x24 mm | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- L-Angle is listed under Jawdah Drywall Solutions.
- Role: the perimeter member fixed to the walls at ceiling level.
- Listed sizes: 22, 24.
- Datasheet sections: 22x22 mm, 24x24 mm.
- Material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
RFQ / BOQ checklist
- Profile size for each item
- Steel thickness
- Lengths and quantities
- Board system the profiles carry
- Accessories needed
- Project location and delivery date
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
Frequently asked questions
It is fixed to the walls at ceiling level, around the perimeter of the room, so it forms the edge member of the suspended ceiling.
Yes. Size 22 corresponds to a 22x22 mm section and size 24 to a 24x24 mm section in the drywall suspension datasheet.
Both are perimeter profiles fixed at the ceiling edge. The L-Angle is a single right-angle section, while the W-Angle has a W-shaped section described by four dimensions in the datasheet.

Next step
Request a quotation for L-Angle
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.

