Jawdah Industrial Co. Ltd.

Mineral Fibre Tiles · Lay-In

Lay-In Mineral Fiber Tiles for Exposed Grid Ceilings

Lay-In Mineral Fiber Tiles are the lay-in format of the mineral fibre tiles in Jawdah's ceiling tile range, made for exposed suspended grids.

Request a Quote

Quick answer

Lay-In Mineral Fiber Tiles are mineral fibre ceiling tiles in Jawdah's range intended to sit within an exposed suspended grid, so each tile can be lifted out for access. Sizes, edge profile, sound absorption, fire classification and humidity tolerance are not specified in the supplied data; the Jawdah team confirms them on request before the tile is specified.

Overview

What the lay-in mineral fibre item is

This page explains the lay-in format, where it is used and how it differs from the lay-on sibling. Sizes, edge profiles and performance values are not yet published; the Jawdah team confirms them per project.

In general, a mineral fibre tile is a light, porous board of mineral fibres, fillers and binder with a finished face. "Lay-in" describes how the tile is supported: it is placed into the openings of an exposed T-grid and held by the grid flanges under its own weight, with no clips or screws.

The format matters more than it first appears. It decides how the tile edge meets the grid, how much of the grid shows from below, and how quickly a tile can be removed for maintenance. Jawdah lists this lay-in item as a separate product-list line from the lay-on item, so the edge treatment of the two is expected to differ; the exact profile is confirmed by Jawdah with the item data.

Types

Lay-in or lay-on: choosing between the siblings

Jawdah lists two mineral fibre formats. The lay-in tile is the one to start from when the ceiling must open often and a variant face, such as the existing Lay-In Micro tile, is wanted. The lay-on tile is its counterpart for a flat, square-edged look in which the grid reads as a clear line.

Mineral fibre formats in the Jawdah range
AspectLay-In tilesLay-On tiles
How it sitsPlaced into the grid openingsRests flat on top of the grid flanges
Typical edge (general guidance)Confirmed by Jawdah; may be steppedSquare edge
Listed variantLay-In Micro (own page)Lay-On Micro
Jawdah item dataOn requestOn request

Edge descriptions are general market guidance; the Jawdah item data sheet governs.

Applications

Where lay-in mineral fibre ceilings are used

Lay-in mineral fibre ceilings are a common choice for dry, air-conditioned interiors where many tiles are lifted during the life of the building: offices with frequent fit-out changes, classrooms, clinics' administrative areas, corridors over service runs and retail back-of-house. They are not a choice for wet rooms, commercial kitchens or areas washed down regularly.

Compatibility

Grid and installation points

A lay-in tile only works if its edge matches the grid flange. Jawdah's T-Grid Systems are produced in T-24 and T-15 types; which of them this tile is made for is confirmed with the tile data, not assumed.

As general practice, install fibrous tiles after the building is closed and wet trades are finished, handle them with clean gloves by the edges, and cut perimeter tiles with a sharp knife so the cut edge sits neatly on the wall angle.

Choosing

Before you send the enquiry

Choose the lay-in item when access and a recessed or variant face matter; choose lay-on for the flattest, simplest grid appearance. In both cases, write performance targets into the specification and ask Jawdah to confirm an item that meets them.

  • Acoustic target per room
  • Fire requirement from the project specification
  • Humidity exposure, especially in coastal cities such as Jeddah and Dammam
  • Grid profile and colour already chosen for the project

Closer look

Detailed product imagery is being prepared.

In preparation

Jawdah data

What Jawdah's data states for this item

Jawdah's product list places Lay-In Mineral Fiber Tiles under Mineral Fibre Tiles, which sit in the Ceiling Tiles range next to gypsum and mineral wool tiles. The Lay-In Micro tile already shown on its own page is a variant of this lay-in line.

No technical data sheet for this item was supplied. Until it is issued, the page does not state dimensions, thickness, weight, edge detail, acoustic values, fire class, humidity rating or light reflectance.

Specifications

Specification status

The table records what is known and what is still open. Values must come from the Jawdah item data, not from another manufacturer's datasheet.

Lay-In Mineral Fiber Tiles: data status
PropertyStatus
MaterialMineral fibre tile (product name)
Installation formatLay-in, exposed grid (product name)
Module sizes and thicknessNot specified in the supplied data sheet
Edge profileNot specified in the supplied data sheet
Sound absorptionNot specified in the supplied data sheet
Reaction to fireNot specified in the supplied data sheet
Humidity / sag resistanceNot specified in the supplied data sheet
Grid profileConfirmed by Jawdah with the item

Key facts

  1. Lay-In Mineral Fiber Tiles are listed under Mineral Fibre Tiles in the Jawdah ceiling tile range.
  2. A lay-in tile is placed into an exposed T-grid and rests on the grid flanges by its own weight.
  3. The Jawdah Lay-In Micro tile is a variant of the lay-in mineral fibre line.
  4. Jawdah has not published sizes, edge profile, acoustic or fire data for Lay-In Mineral Fiber Tiles.
  5. Jawdah produces T-24 and T-15 T-grid systems; the grid for this tile is confirmed with its data.

RFQ / BOQ checklist

  • Ceiling area and reflected ceiling plans
  • Required module and thickness
  • Preferred edge profile for the lay-in tile
  • Acoustic target for each room
  • Reaction-to-fire requirement
  • Humidity exposure of each room
  • Grid type and colour
  • Request for the Jawdah item data sheet before approval

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

Frequently asked questions

  • It means the tile is placed into the openings of an exposed T-grid and rests on the grid flanges by its own weight, so it can be lifted out by hand. The exact edge profile of the Jawdah item is confirmed with its data.

  • Sizes and thickness are not specified in the supplied data. Ask the Jawdah team to confirm the available module for your project before the ceiling layout is fixed.

  • The lay-on tile rests flat on top of the grid with a square edge, while the lay-in tile is placed into the grid openings and may use a different edge. Both are listed separately in Jawdah's range.

  • Yes. The Lay-In Micro tile shown on its own Jawdah page is a variant within the lay-in mineral fibre line.

  • Jawdah makes T-24 and T-15 T-grids. The grid that suits this tile is confirmed together with the tile data, so do not fix the grid profile until the item is confirmed.

  • Fibrous tiles are generally sensitive to high humidity and can sag. The humidity tolerance of this item is not stated, so ask Jawdah to confirm it in writing before using it in humid areas.

Next step

Confirm the lay-in mineral fibre tile

Send your ceiling plans with acoustic, fire and humidity requirements. The Jawdah team will confirm the lay-in mineral fibre item, its data and the matching grid.