Jawdah Industrial Co. Ltd.

Suspension Systems · Ceiling Accessories

Ceiling Accessories for Suspended Ceilings

Ceiling Accessories is the Jawdah item list of seven galvanised steel hanging parts: rod hanger, adjustment clip, Omega clip, anchor bolt, threaded rod, drop anchor and galvanized nut.

Items
7 hanging parts
Material
Galvanised steel
Request a Quote

Quick answer

Jawdah lists seven ceiling hanging accessories in galvanised steel: rod hanger (Ø3.8 mm, 0.5 to 2 m long), adjustment clip (1 mm thick), anchor bolt (Ø6 mm), Omega clip, threaded rod (Ø6 mm, 3 m), drop anchor (Ø6 mm) and galvanized nut (Ø6 mm). The first three hang T-Grid and Standard Clip-In ceilings; the last four belong to the Advanced Clip-In set.

Overview

Seven parts that hang a suspended ceiling

Use this page as an order schedule. Each item has its own page, and the table below shows which suspension set it belongs to. For the wider overview, including screws and the C-Channel Clip, see Ceiling Accessories for Suspension and Drywall Systems.

Ceiling Accessories groups the seven loose parts that hang a suspended ceiling from the structural soffit. None of them forms a ceiling on its own; each is a link in a chain that runs from a fixing in the slab, down a hanger, through an adjuster or nut, to the grid or channel that carries the tiles. Jawdah lists all seven in galvanised steel, and its text states that the steel accessories are produced from hot-dip galvanised steel for rust and humidity resistance.

The page is written so that a contractor can build a complete accessory schedule item by item: count the hanging points from the ceiling layout, decide which suspension set the ceiling uses, then take the matching items from the list. Two sets are recorded in the Jawdah system component lists. One uses rod hangers, adjustment clips and anchor bolts; the other uses Omega clips, threaded rod, nuts and drop anchors, together with a C-Channel Clip that is covered on the broader accessories page rather than here.

How it works

How the items form two hanging chains

In the first chain, an anchor bolt is fixed into the soffit, a rod hanger drops from it, and an adjustment clip grips the rod so the installer can set the grid height before tiles go in.

In the second chain, a drop anchor receives a threaded rod, a galvanized nut locks parts on the rod, and an Omega clip connects the hanger to the channel-type member. This is general guidance on how the parts work together; the system data sets the hanger layout.

Types

The seven items at a glance

Sizes are those recorded in the Jawdah ceiling accessories list. Where the list shows a size only on the product photo, the table says so and the Jawdah team provides the dimension on request.

Jawdah ceiling accessories: role, recorded size and system set
ItemRole in the hanging chainRecorded sizeSystem set
Rod hangerDrops from the soffit to ceiling levelØ3.8 mm x 0.5 to 2 mT-Grid, gypsum tiles, Clip-In Standard
Adjustment clipGrips the rod hanger to set height1 mm thickT-Grid, gypsum tiles, Clip-In Standard
Anchor boltFixes the hanger top into the soffitØ6 mmT-Grid, gypsum tiles, Clip-In Standard
Omega clipConnects the hanger to a channel memberShown on product photo; on requestClip-In Advanced
Threaded rodThreaded hanger, cut to length on siteØ6 mm x 3 mClip-In Advanced
Drop anchorSoffit anchor that receives the threaded rodØ6 mmClip-In Advanced
Galvanized nutLocks parts on the threaded rodØ6 mm (listed as G Nut)Clip-In Advanced

Compatibility

Which items each suspension set uses

The technical data sheets for the T-Grid system, for plain gypsum ceiling tiles and for acoustical perforated gypsum tiles name rod hangers, adjustment clips and anchor bolts as suspension accessories. The Clip-In system data sheet lists the same three for its Standard set, and Omega clip, C-Channel clip, threaded rod, G-nut and drop anchor for its Advanced set.

Items to order per suspension set
Suspension setItems from this list
T-Grid (T24 / T15)Rod hanger, adjustment clip, anchor bolt
Gypsum tiles on T-GridRod hanger, adjustment clip, anchor bolt
Clip-In, Standard setRod hanger, adjustment clip, anchor bolt
Clip-In, Advanced setOmega clip, threaded rod, galvanized nut, drop anchor (plus C-Channel Clip)

Selection pitfalls

Schedule errors to avoid

Hanging accessories are usually counted last, which is where these errors come from.

  • Mixing items from the Standard and Advanced sets on one ceiling
  • Ordering one rod hanger length for a plenum whose depth changes
  • Forgetting a nut or clip for every hanger in the count
  • Leaving the Omega clip size unconfirmed when the list shows it only on a photo
  • Hanging the ceiling from ducts or cable trays instead of the soffit

Choosing

Ordering by system

For exposed T-Grid ceilings, gypsum tile ceilings and Standard Clip-In ceilings, order one anchor bolt, one rod hanger and one adjustment clip per hanging point, with rod hanger lengths taken from the plenum depth. For Advanced Clip-In ceilings, order drop anchors, threaded rod, galvanized nuts and Omega clips, and add the C-Channel Clip from the broader accessories range. Send the ceiling layout with the RFQ so the Jawdah team can confirm counts and lengths.

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

What the data records and what it does not

The Jawdah list records material and the sizes above. Performance data for the individual items is not published, so treat the rows below as open points to confirm with the Jawdah team before ordering.

Recorded and missing data for the item list
PropertyStatus
MaterialGalvanised steel (hot-dip, per the Jawdah text)
Load capacity per itemNot specified in the supplied data sheet
Zinc coating massNot specified in the supplied data sheet
Hanger spacingSet by the suspension system data, not by this list

Key facts

  1. Jawdah Ceiling Accessories lists seven hanging items: rod hanger, adjustment clip, Omega clip, anchor bolt, threaded rod, drop anchor and galvanized nut.
  2. All seven items are listed in galvanised steel.
  3. Rod hangers are Ø3.8 mm and 0.5 to 2 m long; threaded rod is Ø6 mm in 3 m lengths.
  4. T-Grid and Standard Clip-In ceilings use rod hangers, adjustment clips and anchor bolts.
  5. The Advanced Clip-In set uses Omega clip, C-Channel clip, threaded rod, G-nut and drop anchor.
  6. Load capacities of the items are not published in the supplied data.

RFQ / BOQ checklist

  • Suspension system: T-Grid, gypsum tiles or Clip-In
  • Clip-In set: Standard or Advanced
  • Number of hanging points from the ceiling layout
  • Plenum depth per zone for hanger lengths
  • Soffit type for anchor selection
  • Omega clip dimension confirmation
  • Delivery location in Saudi Arabia

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

Frequently asked questions

  • Rod hanger, adjustment clip, Omega clip, anchor bolt, threaded rod, drop anchor and galvanized nut, all in galvanised steel.

  • This page is the item-by-item order list of the seven hanging parts. The main accessories page is the broader overview and also covers screws and the C-Channel Clip.

  • The T-Grid data sheet names rod hangers, adjustment clips and anchor bolts as its suspension accessories.

  • The Clip-In data sheet lists Omega clip, C-Channel clip, threaded rod, G-nut and drop anchor for the Advanced set.

  • No. Load capacity is not specified in the supplied data; ask the Jawdah team and follow the suspension system data for hanger layout.

  • Rod hanger Ø3.8 mm in lengths from 0.5 to 2 m, adjustment clip 1 mm thick, threaded rod Ø6 mm in 3 m lengths, and anchor bolt, drop anchor and nut at Ø6 mm. The Omega clip size is shown only on the product photo.

Next step

Get a hanging accessory schedule

Send the ceiling layout, suspension system and plenum depths. The Jawdah team will confirm the items, counts and lengths for your quotation.