Partition Metal Profiles
Track – Partition Metal Profile
The Track is the galvanised steel channel fixed along the floor and ceiling of a drywall partition to receive and align the vertical studs.
- Sizes
- 42 to 152
- Material
- Galvanised steel
- Length
- 3000 mm
Products in this range
- Image coming soon
42
View Details - Image coming soon
52
View Details - Image coming soon
66
View Details - Image coming soon
72
View Details - Image coming soon
75
View Details - Image coming soon
77
View Details - Image coming soon
92
View Details - Image coming soon
102
View Details - Image coming soon
125
View Details - Image coming soon
152
View Details
Quick answer
Jawdah's Track, also called a runner, is the horizontal channel of a gypsum board partition. It is made from hot-dip galvanised steel complying with ASTM A653M. The product list shows ten sizes: 42, 52, 66, 72, 75, 77, 92, 102, 125 and 152. The datasheet gives sections from 24x42x24 mm to 24x102x24 mm, a 3000 mm standard length and steel from 0.35 up to 0.9 mm thick.
Overview
About Track – Partition Metal Profile
Before a single stud goes up, the partition line is set out with Track. This channel is fixed to the slab and to the soffit, and the studs drop into it. Jawdah lists ten track widths, each a little wider than a stud size in the same system. Here you can see which widths the datasheet covers and which are confirmed on request.
The Track is a U-shaped channel that holds the top and bottom ends of the studs. Jawdah makes it from hot-dip galvanised steel complying with ASTM A653M, in a standard length of 3000 mm and thicknesses from 0.35 up to 0.9 mm, with other thicknesses on request.
The product list runs from 42 to 152 across ten sizes. The datasheet names seven track sections: 24x42x24, 24x52x24, 24x66x24, 24x72x24, 24x77x24, 24x94x24 and 24x102x24 mm. Sizes 75, 92, 125 and 152 have no section of their own in the datasheet, so Jawdah confirms them with the quotation.
The raw-material references are the same as for the studs: BS 476 Part 6 – 1989, a Class 1 surface spread of flame under BS 476 Part 7 – 1997, and humidity testing according to EN ISO 6270-2.
Choose the track width to suit the stud: Jawdah lists each track a little wider than one of its stud sizes, so the two are ordered as a pair. Where extra deflection space at the head is wanted, compare the Deep Flange Track. For 75, 92, 125 and 152, confirm the section with Jawdah before ordering.
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard, in:
- Floor and ceiling channels that set out and hold the studs of interior gypsum partitions.
- Head and base channels for metal-framed wall linings.
- Framing around openings, where track is typically cut and fixed to form heads and sills.
- Bulkheads and boxing frames assembled from track and stud lengths.
Installation
Installation notes
Spans, spacings and heights are not given in the supplied datasheet; they come from the system design and are confirmed with Jawdah. Store profiles dry and wear eye protection when cutting metal.
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Listed sizes | 42, 52, 66, 72, 75, 77, 92, 102, 125, 152 | Jawdah product list |
| Datasheet sections | 24x42x24, 24x52x24, 24x66x24, 24x72x24, 24x77x24, 24x94x24, 24x102x24 mm | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Track is listed under Jawdah Drywall Solutions.
- Role: the track fixed to the floor and soffit that holds the studs.
- Listed sizes: 42, 52, 66, 72, 75, 77, 92, 102, 125, 152.
- Datasheet sections: 24x42x24, 24x52x24, 24x66x24, 24x72x24, 24x77x24, 24x94x24, 24x102x24 mm.
- Material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
RFQ / BOQ checklist
- Profile size for each item
- Steel thickness
- Lengths and quantities
- Board system the profiles carry
- Accessories needed
- Project location and delivery date
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
Frequently asked questions
The Track is the horizontal channel fixed to the floor and ceiling; the Stud is the vertical profile that sits inside it and carries the boards.
Ten sizes: 42, 52, 66, 72, 75, 77, 92, 102, 125 and 152. The datasheet names sections for 42, 52, 66, 72, 77 and 102, plus a 24x94x24 mm section.
The datasheet gives a standard length of 3000 mm for the drywall profiles. Other details, such as steel thickness within 0.35 up to 0.9 mm, are set with the quotation.

Next step
Request a quotation for Track
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.

