Track · 66
Track 66 – Partition Metal Profile
Track 66 is a mid-light floor and ceiling channel from Jawdah, recorded in the datasheet as a 24x66x24 mm galvanised steel section.
- Size
- 66
- Section
- 24x66x24 mm
- Material
- Galvanised steel
- Length
- 3000 mm
Overview
Quick answer
Track 66 is one of ten track widths on Jawdah's product list, third from the narrow end. It holds the studs of a gypsum board partition at the floor and ceiling. The datasheet documents its section as 24x66x24 mm. It is hot-dip galvanised steel complying with ASTM A653M, with a 3000 mm standard length and thickness from 0.35 up to 0.9 mm.
Overview
About Track 66 – Partition Metal Profile
Track 66 is where the track range moves from slim to standard partition widths. It follows Track 52 and comes before Track 72 on Jawdah's list, and its 24x66x24 mm section is named in the datasheet. Jawdah's product list places Stud 64 alongside it, so the pair is the usual starting point for a mid-light partition.
The 66 size is a horizontal channel for drywall framing with a datasheet section of 24x66x24 mm. It is formed from hot-dip galvanised steel complying with ASTM A653M, and the track range is supplied in a 3000 mm standard length.
Its neighbours, Track 52 and Track 72, both have named sections as well, so this part of the range is fully documented. What separates them is the width of the channel, which should follow the stud chosen for the wall.
Thickness for the range is 0.35 up to 0.9 mm, with other thicknesses on request. Raw-material references in the datasheet are BS 476 Part 6 – 1989, Class 1 surface spread of flame under BS 476 Part 7 – 1997, and EN ISO 6270-2 for humidity.
Choose Track 66 when the studs are the width Jawdah lists beside it, Stud 64. If the studs are one listed width wider, Track 72 is the next channel up. Confirm the pairing, the thickness and any head detail with the quotation.
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard. The track is used in:
- Floor and ceiling channels for standard interior partitions in offices and homes.
- Runners for partitions with a modest services cavity.
- Framing of door heads and openings, where track is typically cut to length.
Installation
Installation notes
The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:
- Store profiles flat and dry, away from site water
- Wear eye protection when cutting metal
- Use profiles and accessories from the same system
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size (product list) | 66 | Jawdah product list |
| Section (datasheet) | 24x66x24 mm | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Track 66 is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
- Role: the track fixed to the floor and soffit that holds the studs.
- Datasheet section for this size: 24x66x24 mm.
- Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
- Other sizes listed: 42, 52, 72, 75, 77, 92, 102, 125, 152.
RFQ / BOQ checklist
- Profile and size (Track 66)
- Steel thickness
- Length and quantity
- Board type and layers the system carries
- Accessories needed (clips, rods, anchors, screws)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
The datasheet records Track 66 as 24x66x24 mm, made from hot-dip galvanised steel complying with ASTM A653M.
It is third of ten listed sizes, after 42 and 52 and before 72. The range goes up to 152.
Jawdah's product list includes Stud 64. Confirm the pairing and the steel thickness with Jawdah when ordering.

Next step
Request a quotation for Track 66
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
