Jawdah Industrial Co. Ltd.

Cement Boards · 6 mm

Cement Board 6 mm

The 6 mm Cement Board is the thinnest cement-based drywall board in Jawdah's product list, made in the standard 1200x2400 mm sheet.

Thickness
6 mm
Board size
1200x2400 mm
Edges
Tapered / square
Request a Quote

Quick answer

Jawdah's 6 mm cement board is a rigid, cement-based sheet for drywall construction. It is the thinnest of the four thicknesses on Jawdah's product list (6, 9, 12 and 18 mm), comes as a 1200x2400 mm board with tapered or square edges, and belongs to a range the datasheet lists for fire, moisture and impact resistance without stating any classification.

Overview

About Cement Board 6 mm

At 6 mm, this is the slimmest cement board Jawdah lists. It shares the 1200x2400 mm sheet and the choice of tapered or square edges with the thicker boards, so the decision usually comes down to thickness alone. The datasheet gives no fixed weight or core density for it, saying both change with thickness, so Jawdah supplies the 6 mm figures with the quotation.

This page covers one thickness only: the 6 mm cement board. The datasheet describes the boards as manufactured and tested in compliance with American ASTM requirements, as specified by the board manufacturer. It names fire, moisture and impact among the resistance properties of the range, yet gives no classification or test value for any of them, so none is claimed here.

Every board in the range measures 1200x2400 mm and can be ordered with tapered or square edges. What separates the 6 mm sheet from its 9, 12 and 18 mm siblings is thickness, together with the weight and core density that follow from it; the datasheet says these vary by thickness but prints no values.

The datasheet also covers a 15 mm thickness that has no separate page in Jawdah's product list. If you are weighing 6 mm against that option, ask Jawdah to confirm it. Any fire classification your project needs is likewise confirmed with the quotation, because the datasheet does not state one.

Pick the 6 mm board once your designer has fixed the board thickness for the wall or ceiling build-up. It is the lower end of the listed range, with the 9 mm board as the next step up. All four listed boards share the sheet size, edge options and datasheet, so compare them on thickness first, then confirm weight, density and any fire requirement with Jawdah.

Types

Sizes and variants

This page is the 6 mm board. The other cement board thicknesses in the Jawdah product list are 9 mm, 12 mm and 18 mm. The datasheet also names a 15 mm thickness, which is not listed as a separate product page.

Applications

Where it is used

The datasheet lists a wide range of application areas for the cement boards, including:

  • Interior drywall work in shops and offices where the design specifies a 6 mm cement-based board
  • Airports and exhibition centres, among the building types listed for the cement board range
  • Halls and similar large interiors framed with drywall profiles
  • Computer rooms and utility rooms, where the range's listed moisture and impact resistance is relevant

Installation

System components

The datasheet describes the cement board system as three components. Fixing details, screw type and framing spacing are not given in the supplied datasheet and are confirmed for each project.

  • Cement board (fire and moisture resistance boards, as listed)
  • Drywall systems: Omega, C-channel and angle profiles
  • Suspension accessories

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Cement Board 6 mm: recorded data
PropertyValueSource
Thickness6 mmDatasheet
Thicknesses in the range6, 9, 12, 15, 18 mmDatasheet
Standard board size1200x2400 mmDatasheet
Edge typesTapered, squareDatasheet
Resistance (as listed)Fire, moisture, impact; no rating statedDatasheet
MaterialManufactured and tested complying with American ASTM (manufacturer specs)Datasheet
Weight / core densityVary according to thicknessDatasheet
Fire classification, test valuesNot specified in the supplied datasheetDatasheet

Key facts

  1. Jawdah Cement Board 6 mm is listed under Jawdah Drywall Solutions, Cement Boards.
  2. Cement board thicknesses in the datasheet: 6, 9, 12, 15 and 18 mm.
  3. Standard board size: 1200x2400 mm; edges tapered or square.
  4. Weight and core density vary according to thickness.
  5. System: cement board, drywall framing (Omega, C-channel, angle) and suspension accessories.

RFQ / BOQ checklist

  • Board thickness (6 mm) and edge type
  • Number of boards or area in square metres
  • Wall, ceiling or lining application
  • Framing and accessories needed with the boards
  • Documents your specification requires
  • Project location and delivery date

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

Frequently asked questions

  • Yes. Jawdah's product list shows cement boards in 6, 9, 12 and 18 mm, and 6 mm is the thinnest. The datasheet range runs from 6 to 18 mm and also includes 15 mm, which Jawdah confirms on request.

  • The datasheet does not print a fixed weight. It states that weight and core density vary according to thickness, so Jawdah confirms the values for the 6 mm sheet with the quotation.

  • The datasheet lists fire resistance as a property of the range but gives no classification or test value. If your project needs one, confirm it with Jawdah when you request the quotation.

Next step

Request a quotation for Cement Board 6 mm

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.