Jawdah Industrial Co. Ltd.

Ceiling Metal Profiles

W-Angle – Ceiling Metal Profile

The W-Angle is a galvanised steel perimeter angle with a W-shaped section, used at the edges of a Jawdah suspended gypsum ceiling.

Sizes
20x20 to 25x25
Material
Galvanised steel
Length
3000 mm
Request a Quote

Quick answer

Jawdah's W-Angle is a perimeter profile for the edges of suspended gypsum ceilings, an alternative to the plain L-Angle. Jawdah lists it in 20x20 and 25x25. The datasheet gives a 25x25x25x25 mm section, matching the 25x25 size, steel thickness from 0.35 up to 0.8 mm, and a standard length of 3000 mm.

Overview

About W-Angle – Ceiling Metal Profile

The W-Angle does the same basic job as the L-Angle, holding the ceiling edge at the wall, but with a W-shaped section rather than a single right angle. Jawdah lists two sizes, 20x20 and 25x25. Its steel range is also different from the other ceiling profiles: the datasheet gives 0.35 up to 0.8 mm, with no mention of other thicknesses.

The W-Angle is a perimeter angle used at the edges of the ceiling. Its section, given in the datasheet as 25x25x25x25 mm, is described by four dimensions, which sets it apart from the single right-angle L-Angle used for the same position.

Of the two listed sizes, only 25x25 matches that datasheet section. Size 20x20 has no section in the datasheet, so its dimensions are confirmed by Jawdah with the quotation. The material is hot-dip galvanised steel complying with ASTM A653M, in thicknesses from 0.35 up to 0.8 mm; unlike the C-Channel, furring channel and L-Angle, the datasheet does not offer other thicknesses on request for it.

Standard length is 3000 mm. For the raw material the datasheet cites BS 476 Part 6 – 1989, a Class 1 surface flame spread to BS 476 Part 7 – 1997, and humidity testing to EN ISO 6270-2.

Choose the W-Angle over the L-Angle when the ceiling edge detail calls for its W-shaped section. Between its sizes, 25x25 has datasheet data and 20x20 does not, so ask Jawdah to confirm the 20x20 section. Remember the steel range stops at 0.8 mm for this profile.

Types

Sizes and variants

Sizes with their own page: W-Angle 20x20 and W-Angle 25x25.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard, in:

  • W-shaped perimeter edge of suspended gypsum board ceilings
  • Edges of drywall ceiling bulkheads where the design shows a W-shaped angle
  • Ceiling-to-wall junctions where a plain L-Angle does not suit the detail

Installation

Installation notes

Spans, spacings and heights are not given in the supplied datasheet; they come from the system design and are confirmed with Jawdah. Store profiles dry and wear eye protection when cutting metal.

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

W-Angle – Ceiling Metal Profile: recorded data
PropertyValueSource
Listed sizes20x20, 25x25Jawdah product list
Datasheet sections25x25x25x25 mmDatasheet
Steel thickness0.35 up to 0.8 mmDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. W-Angle is listed under Jawdah Drywall Solutions.
  2. Role: a perimeter angle used at the edges of the ceiling.
  3. Listed sizes: 20x20, 25x25.
  4. Datasheet sections: 25x25x25x25 mm.
  5. Material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.

RFQ / BOQ checklist

  • Profile size for each item
  • Steel thickness
  • Lengths and quantities
  • Board system the profiles carry
  • Accessories needed
  • Project location and delivery date

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

Frequently asked questions

  • It is a perimeter angle used at the edges of a suspended gypsum ceiling, in the same position as an L-Angle but with a W-shaped section.

  • Size 25x25 matches the 25x25x25x25 mm section in the datasheet. Size 20x20 is not listed there, so Jawdah confirms its dimensions on request.

  • The datasheet gives 0.35 up to 0.8 mm hot-dip galvanised steel complying with ASTM A653M. It does not mention other thicknesses for this profile.

Next step

Request a quotation for W-Angle

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.