Partition Metal Profiles
Stud – Partition Metal Profile
The Stud is the vertical galvanised steel profile in Jawdah's partition system, carrying gypsum boards on one or both faces of a drywall wall.
- Sizes
- 40 to 150
- Material
- Galvanised steel
- Length
- 3000 mm
Products in this range
- Image coming soon
40
View Details - Image coming soon
50
View Details - Image coming soon
64
View Details - Image coming soon
70
View Details - Image coming soon
73
View Details - Image coming soon
75
View Details - Image coming soon
90
View Details - Image coming soon
100
View Details - Image coming soon
123
View Details - Image coming soon
150
View Details
Quick answer
Jawdah's Stud is a partition metal profile formed from hot-dip galvanised steel complying with ASTM A653M. The product list shows ten sizes: 40, 50, 64, 70, 73, 75, 90, 100, 123 and 150. The datasheet documents sections from 35x40x34 mm to 35x100x34 mm, gives a standard length of 3000 mm and a steel thickness range of 0.35 up to 0.9 mm, with other thicknesses on request.
Overview
About Stud – Partition Metal Profile
Every drywall partition needs a vertical frame, and in Jawdah's system that frame is the Stud. It stands between the floor and ceiling channels and gives the boards something rigid to be screwed to. This page explains the whole stud family: which sizes Jawdah lists, which of them the datasheet documents, and what the shared material data covers.
The Stud is the upright member of a gypsum board partition. Jawdah forms it from hot-dip galvanised steel that the datasheet describes as complying with ASTM A653M, in a standard length of 3000 mm. Steel thickness runs from 0.35 up to 0.9 mm, and other thicknesses can be requested.
Ten sizes appear in Jawdah's product list, from 40 at the narrow end to 150 at the wide end. The datasheet gives sections for seven entries: 35x40x34, 35x50x34, 35x64x34, 35x70x34, 35x75x34, 35x92x34 and 35x100x34 mm. Sizes 73, 90, 123 and 150 do not have their own named section, so their dimensions are confirmed by Jawdah with the quotation.
For the raw material, the datasheet cites BS 476 Part 6 – 1989 and a Class 1 surface spread of flame under BS 476 Part 7 – 1997, plus humidity testing according to EN ISO 6270-2. These describe the steel, not a finished wall.
Pick the stud size from the partition design: wider sizes leave a deeper cavity, narrower ones keep the wall thin. Sizes 40, 50, 64, 70, 75 and 100 have datasheet sections; for 73, 90, 123 and 150, ask Jawdah to confirm the section. Order the matching Track or Deep Flange Track with the studs so the frame fits together.
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard, in:
- Vertical framing for interior gypsum board partitions in offices, schools, clinics and homes.
- Metal-framed wall linings set in front of block or concrete walls.
- Shaft walls and service boxing where a light steel frame is typical practice.
- Partitions that need a deeper cavity for cables, pipes or insulation, using the wider listed sizes.
Installation
Installation notes
Spans, spacings and heights are not given in the supplied datasheet; they come from the system design and are confirmed with Jawdah. Store profiles dry and wear eye protection when cutting metal.
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Listed sizes | 40, 50, 64, 70, 73, 75, 90, 100, 123, 150 | Jawdah product list |
| Datasheet sections | 35x40x34, 35x50x34, 35x64x34, 35x70x34, 35x75x34, 35x92x34, 35x100x34 mm | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Stud is listed under Jawdah Drywall Solutions.
- Role: the vertical member of a drywall partition that carries the boards on both faces.
- Listed sizes: 40, 50, 64, 70, 73, 75, 90, 100, 123, 150.
- Datasheet sections: 35x40x34, 35x50x34, 35x64x34, 35x70x34, 35x75x34, 35x92x34, 35x100x34 mm.
- Material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
RFQ / BOQ checklist
- Profile size for each item
- Steel thickness
- Lengths and quantities
- Board system the profiles carry
- Accessories needed
- Project location and delivery date
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
Frequently asked questions
Jawdah's product list shows ten sizes: 40, 50, 64, 70, 73, 75, 90, 100, 123 and 150. Each one has its own page with the data that applies to it.
The datasheet lists 35x40x34, 35x50x34, 35x64x34, 35x70x34, 35x75x34, 35x92x34 and 35x100x34 mm. Listed sizes without a named section (73, 90, 123 and 150) are confirmed with the quotation.
Hot-dip galvanised steel complying with ASTM A653M, in thicknesses of 0.35 up to 0.9 mm, with other thicknesses on request, and a standard length of 3000 mm.

Next step
Request a quotation for Stud
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.

