Stud · 75
Stud 75 – Partition Metal Profile
Stud 75 is a vertical drywall stud from Jawdah whose datasheet section is 35x75x34 mm, the widest documented size in the middle band of the range.
- Size
- 75
- Section
- 35x75x34 mm
- Material
- Galvanised steel
- Length
- 3000 mm
Overview
Quick answer
Stud 75 is a hot-dip galvanised steel profile that frames gypsum board partitions. It sits sixth among Jawdah's ten listed stud sizes, and the datasheet records its section as 35x75x34 mm. Shared range data adds steel complying with ASTM A653M, thickness from 0.35 up to 0.9 mm with others on request, and a 3000 mm standard length.
Overview
About Stud 75 – Partition Metal Profile
Stud 75 is the size many partition drawings settle on when they need a wall of moderate depth. In Jawdah's list it follows 73 and precedes 90, and unlike both of those neighbours it has a datasheet section: 35x75x34 mm. That documented geometry is the main reason to specify it directly rather than an adjacent size.
Stud 75 is the upright member of a drywall partition, formed from hot-dip galvanised steel complying with ASTM A653M. Jawdah's data sheet lists its section as 35x75x34 mm.
Around it, the documentation is uneven. Stud 73 below and Stud 90 above have no named section of their own, so Stud 75 is the last documented size before the datasheet jumps to its wider entries. For buyers who want published dimensions in this band, that matters more than the few millimetres between neighbours.
The range figures that apply include a 3000 mm standard length and steel from 0.35 up to 0.9 mm thick, with other thicknesses on request. The raw material is referenced to BS 476 Part 6 – 1989, a Class 1 surface spread of flame under BS 476 Part 7 – 1997, and EN ISO 6270-2 for humidity.
Pick Stud 75 for a mid-depth partition when you want a size the datasheet documents. Stud 70 is the documented alternative just below it; Stud 73 and Stud 90 need their sections confirmed. Jawdah's product list includes a Track 77 alongside this stud. Confirm pairing and steel thickness with the quotation.
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard. The stud is used in:
- General interior partitions in offices, hotels and apartments drawn with a 75 stud.
- Partitions with insulation in the cavity, a common reason for choosing a mid-depth stud.
- Walls carrying electrical and data runs inside the frame.
Installation
Installation notes
The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:
- Store profiles flat and dry, away from site water
- Wear eye protection when cutting metal
- Use profiles and accessories from the same system
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size (product list) | 75 | Jawdah product list |
| Section (datasheet) | 35x75x34 mm | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Stud 75 is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
- Role: the vertical member of a drywall partition that carries the boards on both faces.
- Datasheet section for this size: 35x75x34 mm.
- Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
- Other sizes listed: 40, 50, 64, 70, 73, 90, 100, 123, 150.
RFQ / BOQ checklist
- Profile and size (Stud 75)
- Steel thickness
- Length and quantity
- Board type and layers the system carries
- Accessories needed (clips, rods, anchors, screws)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
The datasheet lists a 35x75x34 mm section in hot-dip galvanised steel complying with ASTM A653M.
Stud 75 has a datasheet section, while Stud 73 does not and is confirmed with the quotation. Choose by your drawings, then by whether you need documented dimensions.
Jawdah's product list includes a Track 77. Confirm that it suits your stud, and agree the steel thickness, with the quotation.

Next step
Request a quotation for Stud 75
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
