Stud · 100
Stud 100 – Partition Metal Profile
Stud 100 is the widest Jawdah partition stud that the datasheet documents by name, with a section of 35x100x34 mm.
- Size
- 100
- Section
- 35x100x34 mm
- Material
- Galvanised steel
- Length
- 3000 mm
Overview
Quick answer
Stud 100 is a galvanised steel drywall stud for deeper partitions. Of Jawdah's ten listed stud sizes, it is the widest one with a section in the datasheet: 35x100x34 mm. The profile range is hot-dip galvanised steel complying with ASTM A653M, with thickness from 0.35 up to 0.9 mm, other thicknesses on request, and a 3000 mm standard length.
Overview
About Stud 100 – Partition Metal Profile
For a deep partition built on documented data, Stud 100 is the upper limit. The datasheet names its 35x100x34 mm section, and no wider stud in Jawdah's list has a section of its own. Stud 123 and Stud 150 go further, but their dimensions are confirmed only with the quotation. That makes Stud 100 the reference point for wide-cavity walls.
Stud 100 is the vertical profile of a gypsum board partition, made from hot-dip galvanised steel complying with ASTM A653M. Its section in the datasheet is 35x100x34 mm.
Its position in the range is what makes it useful. Among the ten listed sizes it ranks eighth, and it is the last one the datasheet covers by name. Stud 90 just below it and Stud 123 above it both need their sections confirmed, so for a wide, documented stud this is the size to start from.
Shared range data applies as well. Steel thickness runs from 0.35 up to 0.9 mm, with other thicknesses on request, and the standard length is 3000 mm. For the raw material, the datasheet cites BS 476 Part 6 – 1989 and a Class 1 surface spread of flame under BS 476 Part 7 – 1997.
Choose Stud 100 for a wide partition when you want published dimensions. If the design needs more depth, Stud 123 and Stud 150 are listed, but confirm their sections first. Jawdah's product list includes a Track 102 beside this stud; confirm the pairing and steel thickness with the quotation.
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard. The stud is used in:
- Deep interior partitions carrying pipework, ducts or thicker insulation in the cavity.
- Taller walls where designers typically move to a wider stud, subject to the system design.
- Partitions in hospitals, hotels and commercial buildings drawn with a 100 stud.
Installation
Installation notes
The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:
- Store profiles flat and dry, away from site water
- Wear eye protection when cutting metal
- Use profiles and accessories from the same system
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size (product list) | 100 | Jawdah product list |
| Section (datasheet) | 35x100x34 mm | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Stud 100 is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
- Role: the vertical member of a drywall partition that carries the boards on both faces.
- Datasheet section for this size: 35x100x34 mm.
- Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
- Other sizes listed: 40, 50, 64, 70, 73, 75, 90, 123, 150.
RFQ / BOQ checklist
- Profile and size (Stud 100)
- Steel thickness
- Length and quantity
- Board type and layers the system carries
- Accessories needed (clips, rods, anchors, screws)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
Jawdah's data sheet records Stud 100 as 35x100x34 mm, in hot-dip galvanised steel complying with ASTM A653M.
No. Stud 123 and Stud 150 are wider, but Stud 100 is the widest with a section named in the datasheet.
Jawdah's product list includes a Track 102. Ask Jawdah to confirm it as the partner for Stud 100 and to set the steel thickness in the quotation.

Next step
Request a quotation for Stud 100
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
