Metal Ceilings · Strip Ceilings
Metal Strip Ceiling
Jawdah strip ceilings are linear aluminium ceilings made of long formed strips that snap onto galvanised steel carriers, offered in three profiles — C-type, R-type and V-type — each plain or perforated.
- Types
- C-type, R-type, V-type
- Widths
- 100 / 150 / 200 mm
- Colours
- 110
- Carrier
- Galvanised, 0.55 mm, 4,000 mm

Overview
Quick answer
Jawdah aluminium strip ceilings come in three types: C-type (84C gives a 100 mm module, 184C a 200 mm module), R-type (84R and 134R with a 16 mm infill give 100 mm and 150 mm face widths) and V-type (150V and 200V give 150 mm and 200 mm face widths). All use alloy 3005 or 3105, 110 colours, optional Ø 1.8 mm perforation, and 4000 mm galvanised carriers 0.55 mm thick.
Overview
What a strip ceiling is
A strip ceiling, also called a linear ceiling, covers the soffit with parallel aluminium strips that run the length of the space. Jawdah Industrial Co. Ltd. produces three strip profiles from aluminium alloy 3005 or 3105, each with its own carrier: the C-type in 84C and 184C, the R-type in 84R and 134R with a 16 mm infill, and the V-type in 150V and 200V.
This category covers metal strip ceilings. The Jawdah product data contains strip ceilings only; there is no Jawdah mesh ceiling data, so mesh specifications are not given on this page and must be confirmed with the Jawdah team for any project that needs them.
Strip ceilings are built from long, narrow aluminium panels with formed edges. The strips clip onto carriers fixed at right angles above them, so the ceiling reads as a series of continuous lines. The profile of the strip edge, and whether a joint or infill sits between strips, gives each type its character.
Because the strips are long and light, a strip ceiling suits corridors, malls, transport buildings and covered external areas where a strong directional line is wanted. Individual strips can be released from the carrier for access to services above.
Types
C-type, R-type and V-type compared
The three Jawdah strip types differ in profile, width and standard thickness. The C-type gives a flat, closed linear plane on a 100 mm or 200 mm module. The R-type uses an infill joint between strips, producing a softer line with 100 mm or 150 mm face widths. The V-type gives the widest standard faces, 150 mm and 200 mm, with a pronounced linear rhythm.
| Type | Codes | Module / face width | Standard thickness | Carrier |
|---|---|---|---|---|
| C-type | 84C / 184C | Module width 100 mm / 200 mm | 0.5 mm (0.6, 0.7 on request) | C-carrier, 4000 mm, 0.55 mm |
| R-type | 84R / 134R | Face width 100 mm / 150 mm including 16 mm infill | 0.45 mm (0.5, 0.6, 0.7 available) | R-carrier, 4000 mm, 0.55 mm |
| V-type | 150V / 200V | Face width 150 mm / 200 mm | 0.5 mm (0.6, 0.7 available) | V-carrier, 4000 mm, 0.55 mm |
All types: plain or perforated (circular perforation 1.8 mm with acoustic black tissue). Other thicknesses on request.
Why Jawdah
Why Jawdah strip ceilings
Jawdah supplies the strips, carriers, infill joints and border angles as one matched system. Technical Data Sheets for the C-type, R-type and V-type strip ceilings, the Strip Ceiling Suspension System Technical Data Sheet and the Metal Ceiling System Catalogue are available on request, with the installation manual and tests in hard copy.
Performance
References and their scope
The strip data states a light reflectance of more than 0.8 according to ASTM E 1477-98 and humidity resistance up to 1000 hours according to ASTM D 2247, both for the raw material. These values differ from the metal tile values and should not be copied onto tile specifications, or the reverse. The Class 0 references under BS 476 are also raw-material statements. Perforation is listed for acoustic usage, but no sound absorption coefficient is given.
Design
Choosing a strip type
Start with the width you want to see. Narrow 100 mm modules (84C, 84R) give a fine, dense line; 150 mm and 200 mm faces (134R, 150V, 184C, 200V) read as bolder planks and need fewer strips per metre. Then decide on the joint: the R-type infill gives a consistent, softer gap; the C-type gives a crisp closed plane; the V-type shows a more pronounced rhythm.
Run strips along the main direction of movement to lengthen a corridor visually, or across it to widen it. Use perforated strips where noise control is needed, and keep plain strips in wet or easy-clean zones.
- Fine, dense lines: 84C or 84R.
- Wide planks: 184C or 200V.
- Mid width with a soft joint: 134R.
- External soffits: confirm exposure and detailing with Jawdah.
Applications
Where strip ceilings are used
Jawdah lists strip ceilings for bathrooms, kitchens, wet areas, halls, outdoor bottom covering, hospitals, shops, offices, airports and exhibition centres. Perforated strips are also listed for offices, corridors, public buildings, transport areas, shopping centres and interior fit-out projects where acoustic comfort matters.
Outdoor bottom covering, such as the underside of canopies and covered walkways, is a use that sets strip ceilings apart from the tile families on this site; the linear aluminium strips are suited to semi-exposed soffits as well as interiors.
Compatibility
Carriers and angles for each profile
Each strip type clips only onto its own carrier, which is why the type must be fixed before ordering suspension. Carriers are hot-dip galvanised steel complying with ASTM A 653, 0.55 mm thick as standard and 4,000 mm long, in four versions: 84R, 134R, 84C/184C and 150V/200V. The strip ceiling suspension systems page covers them in full.
| Component | Stated detail |
|---|---|
| Carriers | 84R, 134R, 84C/184C, 150V/200V; hot-dip galvanised steel, ASTM A 653 |
| Carrier thickness / length | 0.55 mm (standard) / 4,000 mm |
| Border / wall angles | L angle, W angle, U angle; 4000 mm length |
| Angle material / thickness | Aluminium / 0.4 mm |
| R-type infill joint | Made of the same material as the panel |
Selection pitfalls
Strip ceiling selection mistakes
Strip systems are not interchangeable, so most errors come from mixing parts of different types.
- Ordering a carrier that does not match the strip code.
- Assuming R-type face width excludes the 16 mm infill; it includes it.
- Using the tile reflectance value (0.75) for strips, whose data states 0.8.
- Expecting a mesh ceiling specification from Jawdah data; none is listed.
- Forgetting border angles at walls and openings.
Choosing
Strip, mesh or another metal ceiling
If you need a linear closed ceiling, compare the three strip pages: C-type, R-type and V-type. If you need an open linear ceiling, look at the metal baffle ceiling. For expanded or woven mesh ceilings, contact Jawdah; the approved data does not include a mesh product, so dimensions, materials and finishes would have to be confirmed per project.
Technical
Closer look
Detailed product imagery is being prepared.
In preparationMaterials
Shared material and finish
All three profiles use the same aluminium material and coating. The strips are produced in aluminium alloy 3005 or 3105 with a pre-painted polyester coating of 25 microns on the front and 5 microns on the back according to EN 1396, and are available in 110 different colours. Border or wall angles are made of the same material as the panel.
| Property | Value |
|---|---|
| Material | Strips in alloy 3005 or 3105, listed as complying with BS 476 Part 7-1987, ASTM B 209, ASTM D 2247, ASTM E 1477-98, EN 1396 |
| Colours | Available in 110 different colours |
| Finish | EN 1396 pre-painted polyester: primer + polyester 25 microns on the face, polyester 5 microns on the reverse |
| Fire (raw material) | BS 476 Part 7-1987 Class 0; BS 476 Part 6 & 7 surface flame spread Class 0 |
| Humidity (raw material) | Up to 1000 HRS according to ASTM D 2247 |
| Light reflectance (raw material) | More than 0.8 according to ASTM E 1477-98 |
| Acoustic option | Circular perforation 1.8 mm with acoustic black tissue on the back |

Key facts
- Jawdah produces aluminium strip ceilings in C-type, R-type and V-type profiles.
- Jawdah C-type strips 84C and 184C give module widths of 100 mm and 200 mm.
- Jawdah R-type strips 84R and 134R with a 16 mm infill give face widths of 100 mm and 150 mm.
- Jawdah V-type strips 150V and 200V give face widths of 150 mm and 200 mm.
- The data for Jawdah strip ceilings states a light reflectance of more than 0.8 according to ASTM E 1477-98 (raw material).
- Jawdah strip carriers are hot-dip galvanised steel, 0.55 mm thick and 4,000 mm long.
- The Jawdah product data contains no mesh ceiling specification.
RFQ / BOQ checklist
- Strip type and code: 84C, 184C, 84R, 134R, 150V or 200V
- Plain or perforated strips
- Strip thickness
- Colour from the 110-colour range
- Strip direction and lengths
- Carrier type and quantity
- Border angle shape: L, W or U
- Interior or outdoor bottom covering
- Ceiling area and drawings
- Mesh requirement, if any, with full description
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
Three aluminium strip types: C-type (84C/184C), R-type (84R/134R) and V-type (150V/200V), each available plain or perforated.
The approved Jawdah product data lists strip ceilings only and contains no mesh ceiling specification. Contact the Jawdah team to discuss any mesh requirement; details would be confirmed per project.
C-type gives 100 mm (84C) or 200 mm (184C) modules; R-type gives 100 mm (84R) or 150 mm (134R) face widths including a 16 mm infill; V-type gives 150 mm (150V) or 200 mm (200V) face widths.
0.5 mm for C-type and V-type and 0.45 mm for R-type as standard, with 0.6 and 0.7 mm also listed (plus 0.5 mm for R-type) and other thicknesses on request.
Yes. All three types can be perforated for acoustic use with 1.8 mm circular perforation and black acoustic tissue on the back.
Outdoor bottom covering, such as canopy soffits, is a listed application for Jawdah strip ceilings.
Hot-dip galvanised steel carriers to ASTM A 653, 0.55 mm thick and 4,000 mm long, in 84R, 134R, 84C/184C and 150V/200V versions.
Strip ceilings are available in 110 different colours with a pre-painted polyester finish according to EN 1396.

Next step
Compare strip profiles for your project
Send the ceiling layout, preferred strip width and colour, and Jawdah will propose the C, R or V system with carriers and angles.



