Jawdah Industrial Co. Ltd.

Mineral Fibre Tiles · Lay-On

Lay-On Mineral Fiber Tiles for Exposed Grid Ceilings

Lay-on Mineral Fiber Tiles are mineral fibre ceiling tiles in Jawdah's range that rest flat on top of the flanges of an exposed T-grid.

Request a Quote

Quick answer

Lay-on Mineral Fiber Tiles are flat mineral fibre ceiling tiles from Jawdah's range that lie on top of the exposed grid flanges and lift out by hand. A Micro variant is listed as a separate item. Module, thickness, acoustic absorption, fire class and humidity tolerance are not specified in the supplied data, so the Jawdah team confirms them before specification.

Overview

How a lay-on mineral fibre ceiling looks and works

The lay-on format gives the simplest grid ceiling: tile and grid sit in almost one plane, with the grid showing as a regular line. Item sizes and performance values have not been published yet and are confirmed by the Jawdah team per project.

On a lay-on ceiling the tile edge is straight and unrebated, and it simply rests on the top of the main and cross tee flanges. Seen from below, the underside of the tile and the face of the grid are nearly flush, so the ceiling reads as a flat field divided by a neat grid line.

For a mineral fibre tile, this format keeps detailing easy: no stepped edge to cut at the perimeter and no rebate to damage in handling. The tile body itself, in general, is a porous board of mineral fibres, fillers and binder, which gives low weight and sound absorption through its face.

Types

Lay-on, Micro or lay-in?

Three mineral fibre items sit side by side in the range. The standard lay-on tile is the default for a plain, flush ceiling. The Micro variant keeps the lay-on format but is listed as a distinct face. The lay-in tile changes how the tile meets the grid.

Mineral fibre items compared
ItemFormatWhen to consider it
Lay-on Mineral Fiber TilesRests flat on the gridFlush, simple grid ceiling
Lay-on, MicroRests flat on the gridSame format with a distinct listed face
Lay-In Mineral Fiber TilesPlaced into the grid openingsWhere a lay-in edge or the Lay-In Micro face is wanted

Face and edge details of each item are confirmed with the Jawdah item data.

Applications

Typical uses for lay-on mineral fibre tiles

In general, lay-on mineral fibre ceilings suit large, dry, conditioned areas where cost control and easy access are priorities: open offices, training rooms, corridors, waiting areas and retail floors. Because each tile lifts out without tools, they suit ceilings with frequent access to cabling and air-conditioning. Avoid them in kitchens, washrooms and other wet areas.

Compatibility

Working with Jawdah grids and other lay-on tiles

Jawdah already supplies lay-on gypsum ceiling tiles with a square edge for T-24 and T-15 grids. Whether the mineral fibre lay-on tile shares the same module and grid as those tiles is not stated, so check this with Jawdah before mixing tile types in one ceiling.

Grid colour matters with any lay-on tile because the flange stays visible; choose it with the tile face colour once that is confirmed.

Selection pitfalls

Mistakes to avoid

With a format this familiar, the risk is assuming data rather than confirming it.

  • Assuming the module of the gypsum lay-on tiles applies to mineral fibre
  • Copying acoustic or fire values from a generic datasheet
  • Using fibrous lay-on tiles in wet or washed areas
  • Repainting installed tiles, which can close the porous face
  • Fixing grid colour before the tile face is confirmed

Choosing

Choosing and requesting the lay-on tile

Choose the standard lay-on item when a flush, practical tile ceiling is the aim and no special face is required. Send Jawdah the acoustic, fire and humidity requirements, the reflected ceiling plans and the grid choice, and ask for the item data sheet before approval.

Closer look

Detailed product imagery is being prepared.

In preparation

Jawdah data

What Jawdah lists for the lay-on item

Jawdah's product list places Lay-on Mineral Fiber Tiles under the Mineral Fibre Tiles category of its Ceiling Tiles range. One variant is listed under it: Lay-on Mineral Fiber Tiles, Micro, which has its own page.

No technical data sheet was supplied for this item. Dimensions, thickness, weight, face finish, acoustic values, fire classification, humidity rating and light reflectance are therefore not stated here and must be confirmed by Jawdah.

Specifications

Specification status

Only the product name is a confirmed source for this item. Every open line below is a point to close in writing with Jawdah before approval.

Lay-on Mineral Fiber Tiles: data status
PropertyStatus
MaterialMineral fibre tile (product name)
Installation formatLay-on, resting on exposed grid flanges (product name)
EdgeSquare edge is typical of lay-on tiles; Jawdah to confirm
Module sizes and thicknessNot specified in the supplied data sheet
Sound absorptionNot specified in the supplied data sheet
Reaction to fireNot specified in the supplied data sheet
Humidity / sag resistanceNot specified in the supplied data sheet
Face finishNot specified in the supplied data sheet

Key facts

  1. Lay-on Mineral Fiber Tiles are listed under Mineral Fibre Tiles in the Jawdah ceiling tile range.
  2. A lay-on tile rests flat on top of exposed grid flanges and lifts out by hand.
  3. Jawdah lists a Micro variant of the lay-on mineral fibre tile as a separate item.
  4. Module, thickness, acoustic, fire and humidity data for this item are confirmed by Jawdah on request.
  5. Jawdah lay-on gypsum tiles use T-24 and T-15 grids; the mineral fibre tile grid is still to be confirmed.

RFQ / BOQ checklist

  • Ceiling area and reflected ceiling plans
  • Standard lay-on or Micro variant
  • Required module and thickness
  • Acoustic target per room
  • Reaction-to-fire requirement
  • Humidity exposure per room
  • Grid type and colour
  • Request for the Jawdah item data sheet

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

Frequently asked questions

  • A flat mineral fibre tile that rests on top of the flanges of an exposed T-grid. The tile underside and the grid face sit nearly flush, and each tile lifts out by hand.

  • Yes. Lay-on Mineral Fiber Tiles, Micro is listed as a separate item under the lay-on line. Its face details are confirmed with the Jawdah item data.

  • These are not specified in the supplied data. Ask the Jawdah team to confirm the module and thickness before drawing the ceiling layout.

  • Only if both tiles share the same module and grid profile. This has not been stated for the mineral fibre tile, so confirm it with Jawdah first.

  • No acoustic value is stated in the supplied data. Mineral fibre tiles generally absorb sound through a porous face, but the value for this item must come from the Jawdah data sheet.

  • Lay-on gives the flattest, simplest grid appearance. Lay-in places the tile into the grid openings and may use a different edge. Choose by appearance and access needs, then confirm the item with Jawdah.

Next step

Request the lay-on mineral fibre tile data

Share your plans and performance targets. Jawdah will confirm the lay-on mineral fibre item, its module and the grid to use with it.