Mineral Wool Tiles · Lay-On
Lay-On Mineral Wool Tiles for Exposed Grid Ceilings
Lay-on Mineral Wool Tiles are mineral wool ceiling tiles from Jawdah's range that rest flat on top of the flanges of an exposed grid.
Products in this range
Quick answer
Lay-on Mineral Wool Tiles are flush mineral wool ceiling tiles in Jawdah's range: the tile rests on top of the exposed grid flanges with its face close to the grid line and lifts out by hand. A Painted variant is listed separately. Core, module, sound absorption, fire class and humidity data are not specified in the supplied data and are confirmed on request.
Overview
The lay-on mineral wool tile in brief
The Arabic product name calls the item "غير هابط", a tile that is not dropped, so the face sits level with the grid. A painted variant is listed under it. Values are not yet published and are confirmed by Jawdah.
A lay-on tile has a straight edge that lies on the top of the main and cross tee flanges. The underside of the tile and the face of the grid are almost in one plane, so the ceiling reads as a flat surface crossed by a regular grid line, without the shadow of a dropped edge.
With a mineral wool body, generally a bonded slab of stone or glass wool with a faced surface, this format gives a light, absorptive ceiling that is simple to cut at the perimeter and quick to open for access.
Design
Design points to settle
Because the grid stays visible on a lay-on ceiling, choose the grid colour together with the tile face. State the absorption target and, where partitions stop at the ceiling, the room-to-room attenuation needed, because high absorption alone does not block sound passing over a partition.
Where documented acoustic values are needed today, Jawdah's acoustic perforated gypsum tiles are an alternative with published data.
Applications
Typical uses
Lay-on mineral wool ceilings are generally chosen for large, dry, conditioned spaces where echo control and a calm, flat ceiling both matter: open offices, call centres, classrooms, libraries, prayer and multi-purpose halls inside commercial buildings, and corridors. Where impact or frequent handling is expected, a reinforced tile such as GRG may suit better.
Choosing
When to choose the lay-on mineral wool tile
Choose this item when the brief is a flat, absorptive ceiling with simple access, and no painted face is specified; choose the painted variant when it is. Send Jawdah the acoustic, fire and humidity requirements with the plans and ask for the item data sheet.
Closer look
Detailed product imagery is being prepared.
In preparationJawdah data
What Jawdah's product list states
Lay-on Mineral Wool Tiles are listed under the Mineral Wool Tiles category of the Ceiling Tiles range, with Lay-on Mineral Wool Tiles, Painted as their variant. The lay-in line mirrors this structure.
No technical data sheet was supplied. Core type, density, module, thickness, facing, acoustic values, fire class, humidity rating and grid compatibility are confirmed by Jawdah per enquiry.
Specifications
Specification status
Only the product name is confirmed. Each open line is a value to obtain in writing.
| Property | Status |
|---|---|
| Material | Mineral wool tile (product name) |
| Installation format | Lay-on; Arabic name describes a tile that is not dropped |
| Core and density | Not specified in the supplied data sheet |
| Module sizes and thickness | Not specified in the supplied data sheet |
| Sound absorption | Not specified in the supplied data sheet |
| Reaction to fire | Not specified in the supplied data sheet |
| Humidity performance | Not specified in the supplied data sheet |
Comparison
Lay-on mineral wool, lay-in mineral wool or lay-on mineral fibre?
Two decisions are combined here: the format and the material. Against the lay-in mineral wool tile, this item trades the recessed shadow line for a flat ceiling and simpler perimeter cutting. Against the lay-on mineral fibre tile, it keeps the format but changes the material.
| Aspect | Lay-on mineral wool | Lay-in mineral wool | Lay-on mineral fibre |
|---|---|---|---|
| Grid appearance | Flush, grid visible as a line | Dropped face, shadowed grid | Flush, grid visible as a line |
| Body (general) | Light wool slab | Light wool slab | Denser fibre board |
| Absorption (general) | Usually high | Usually high | Moderate to good |
| Jawdah data | On request | On request | On request |
General market guidance only; the Jawdah item data sheets govern.

Key facts
- Lay-on Mineral Wool Tiles are listed under Mineral Wool Tiles in the Jawdah ceiling tile range.
- The Arabic product name describes Lay-on Mineral Wool Tiles as not dropped.
- A lay-on mineral wool tile rests flat on exposed grid flanges with its face near the grid line.
- Jawdah lists a painted variant of the lay-on mineral wool tile.
- Core, size, acoustic, fire and humidity data for this item are confirmed by Jawdah on request.
RFQ / BOQ checklist
- Ceiling area and reflected ceiling plans
- Base or painted face
- Module and thickness
- Absorption target per room
- Attenuation target where partitions stop at the ceiling
- Reaction-to-fire requirement
- Humidity conditions
- Grid type and colour
- Request for the Jawdah item data sheet
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
Frequently asked questions
A light mineral wool ceiling tile that rests flat on top of an exposed grid, with its face close to the grid line. It lifts out by hand for access.
It means the tile is not dropped: the face sits level with the grid rather than below it. The exact edge of the Jawdah item is confirmed with its data.
Neither is better in general. Lay-on gives a flat ceiling and simpler perimeter cutting; lay-in gives a recessed grid with a shadow line. Choose by appearance, then confirm data with Jawdah.
Yes. Lay-on Mineral Wool Tiles, Painted is listed as a variant of this item.
It is not stated in the supplied data. Request it from Jawdah with the test standard before it enters the specification.
Many mineral wool products tolerate humidity better than mineral fibre boards, but this depends on the product. Ask Jawdah to confirm the humidity performance in writing.

Next step
Confirm the lay-on mineral wool tile
Share your acoustic brief and plans. Jawdah will confirm the lay-on mineral wool item, its data and the grid to use.

