Jawdah Industrial Co. Ltd.

Cement Boards · 12 mm

Cement Board 12 mm

The 12 mm Cement Board is Jawdah's 1200x2400 mm cement-based drywall sheet in the thickness between its 9 mm and 18 mm boards.

Thickness
12 mm
Board size
1200x2400 mm
Edges
Tapered / square
Request a Quote

Quick answer

Jawdah's 12 mm cement board is a rigid sheet with a cement base, used in drywall partitions, linings and ceilings. On Jawdah's product list it falls between the 9 mm and 18 mm boards. The sheet is 1200x2400 mm, edges are tapered or square, and weight and core density are confirmed per order because the datasheet ties them to thickness.

Overview

About Cement Board 12 mm

Twelve millimetres puts this board in the upper half of Jawdah's listed cement boards, above 6 and 9 mm and below 18 mm. Like the others it is a 1200x2400 mm sheet with a tapered or square edge. Buyers usually reach this page when a specification names 12 mm, so the main checks are edge type, weight and any fire classification.

The 12 mm sheet is one thickness of Jawdah's cement board range. According to the datasheet, the boards are manufactured and tested in line with American ASTM, as the board manufacturer states. The datasheet records fire, moisture and impact as resistance properties for the range and stops there: there is no rating, class or test value to quote.

Two neighbours matter when comparing. The 9 mm board is the next size down on Jawdah's product list, while the 18 mm board is the next listed size up. The datasheet also includes a 15 mm thickness between them, which has no page of its own, so ask Jawdah about it if your design sits in that gap.

Dimensions stay the same across sizes: 1200x2400 mm, edges tapered or square. Weight and core density do not, and the datasheet gives them only as varying with thickness. Jawdah confirms the 12 mm values, and any fire classification, with the quotation.

Choose 12 mm when the project design specifies it; the datasheet gives no performance figure that would justify picking one thickness over another. If you are between sizes, compare it with 9 mm on the thinner side and 18 mm on the thicker side, and ask Jawdah whether the 15 mm thickness from the datasheet can be supplied. Confirm edge type and weight before ordering.

Types

Sizes and variants

This page is the 12 mm board. The other cement board thicknesses in the Jawdah product list are 6 mm, 9 mm and 18 mm. The datasheet also names a 15 mm thickness, which is not listed as a separate product page.

Applications

Where it is used

The datasheet lists a wide range of application areas for the cement boards, including:

  • Office and retail partitions where the specification names a 12 mm cement board
  • Airport and exhibition centre interiors, as listed for the cement board range
  • Wall linings in halls fixed to Jawdah metal framing
  • Computer rooms and plant or utility rooms where the range's listed moisture resistance is a consideration

Installation

System components

The datasheet describes the cement board system as three components. Fixing details, screw type and framing spacing are not given in the supplied datasheet and are confirmed for each project.

  • Cement board (fire and moisture resistance boards, as listed)
  • Drywall systems: Omega, C-channel and angle profiles
  • Suspension accessories

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Cement Board 12 mm: recorded data
PropertyValueSource
Thickness12 mmDatasheet
Thicknesses in the range6, 9, 12, 15, 18 mmDatasheet
Standard board size1200x2400 mmDatasheet
Edge typesTapered, squareDatasheet
Resistance (as listed)Fire, moisture, impact; no rating statedDatasheet
MaterialManufactured and tested complying with American ASTM (manufacturer specs)Datasheet
Weight / core densityVary according to thicknessDatasheet
Fire classification, test valuesNot specified in the supplied datasheetDatasheet

Key facts

  1. Jawdah Cement Board 12 mm is listed under Jawdah Drywall Solutions, Cement Boards.
  2. Cement board thicknesses in the datasheet: 6, 9, 12, 15 and 18 mm.
  3. Standard board size: 1200x2400 mm; edges tapered or square.
  4. Weight and core density vary according to thickness.
  5. System: cement board, drywall framing (Omega, C-channel, angle) and suspension accessories.

RFQ / BOQ checklist

  • Board thickness (12 mm) and edge type
  • Number of boards or area in square metres
  • Wall, ceiling or lining application
  • Framing and accessories needed with the boards
  • Documents your specification requires
  • Project location and delivery date

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

Frequently asked questions

  • Jawdah's product list jumps from 12 mm to 18 mm. The datasheet, however, includes a 15 mm thickness, so ask Jawdah to confirm whether it can be supplied for your order.

  • The datasheet gives a standard board size of 1200x2400 mm for the range, and the 12 mm board uses that same format with a tapered or square edge.

  • No. The datasheet states only that weight and core density vary according to thickness. Jawdah confirms the 12 mm values with the quotation.

Next step

Request a quotation for Cement Board 12 mm

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.