Track · 102
Track 102 – Partition Metal Profile
Track 102 is the widest Jawdah partition channel the datasheet documents by name, with a section of 24x102x24 mm.
- Size
- 102
- Section
- 24x102x24 mm
- Material
- Galvanised steel
- Length
- 3000 mm
Overview
Quick answer
Track 102 is a galvanised steel floor and ceiling channel for deeper partitions. Of Jawdah's ten listed track widths, it is the widest with a section in the datasheet: 24x102x24 mm. The range is hot-dip galvanised steel complying with ASTM A653M, with thickness from 0.35 up to 0.9 mm, other thicknesses on request, and a 3000 mm standard length.
Overview
About Track 102 – Partition Metal Profile
For a wide partition on documented framing, Track 102 marks the upper limit of the data. The datasheet names its 24x102x24 mm section, and no wider track in Jawdah's list has one. Track 125 and Track 152 are wider, but their sections are confirmed only with the quotation. Jawdah lists Stud 100 beside it, the matching documented stud.
Track 102 is the channel fixed at floor and ceiling to hold the studs of a gypsum board partition. It is made from hot-dip galvanised steel complying with ASTM A653M, and its datasheet section is 24x102x24 mm.
Its place in the list gives it its value. It ranks eighth of ten and is the widest track the datasheet covers by name. Track 92 below and Track 125 above both need their sections confirmed, so for a wide documented channel this is where to start, together with Stud 100.
Shared range data applies too. Steel thickness runs from 0.35 up to 0.9 mm, with other thicknesses on request, and the standard length is 3000 mm. For the raw material the datasheet cites BS 476 Part 6 – 1989 and a Class 1 surface spread of flame under BS 476 Part 7 – 1997.
Choose Track 102 for a wide partition built with Stud 100 when you want published dimensions for both. If a deeper wall is needed, Track 125 and Track 152 are listed, but confirm their sections first. Agree the pairing and steel thickness in the quotation.
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard. The track is used in:
- Head and base channels for deep partitions with pipework or thicker insulation.
- Runners for taller walls where designers typically choose wider framing, subject to the system design.
- Partitions in hospitals, hotels and commercial buildings drawn with a 100 stud.
Installation
Installation notes
The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:
- Store profiles flat and dry, away from site water
- Wear eye protection when cutting metal
- Use profiles and accessories from the same system
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size (product list) | 102 | Jawdah product list |
| Section (datasheet) | 24x102x24 mm | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Track 102 is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
- Role: the track fixed to the floor and soffit that holds the studs.
- Datasheet section for this size: 24x102x24 mm.
- Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
- Other sizes listed: 42, 52, 66, 72, 75, 77, 92, 125, 152.
RFQ / BOQ checklist
- Profile and size (Track 102)
- Steel thickness
- Length and quantity
- Board type and layers the system carries
- Accessories needed (clips, rods, anchors, screws)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
Jawdah's data sheet records Track 102 as 24x102x24 mm, in hot-dip galvanised steel complying with ASTM A653M.
No. Track 125 and Track 152 are wider, but Track 102 is the widest with a section named in the datasheet.
Jawdah's product list places Stud 100 beside it, and both have datasheet sections. Confirm the pairing and thickness with the quotation.

Next step
Request a quotation for Track 102
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
