Track · 92
Track 92 – Partition Metal Profile
Track 92 is a wider partition channel on Jawdah's product list; the datasheet does not name a 92 section, so Jawdah confirms its dimensions on request.
- Size
- 92
- Material
- Galvanised steel
- Length
- 3000 mm
Overview
Quick answer
Track 92 is a hot-dip galvanised steel channel listed by Jawdah for deeper drywall partitions. The datasheet has no section labelled 92. It does include a 24x94x24 mm track section, but it does not link that entry to this width, so the section is confirmed with the quotation. Range data gives steel complying with ASTM A653M, 0.35 up to 0.9 mm thick, in a 3000 mm length.
Overview
About Track 92 – Partition Metal Profile
Track 92 opens the wider end of Jawdah's track list, and it comes with a documentation question. The datasheet shows a 24x94x24 mm track section, while the product list shows 92. They may describe the same channel or they may not, and this page does not decide. Jawdah lists Stud 90 beside it, which raises the same question for the stud.
Track 92 is the floor and ceiling channel for partitions deeper than the mid-range widths. Jawdah lists it as 92, and it is the seventh of the ten track widths on the product list.
No 92 track appears in the datasheet. There is a 24x94x24 mm entry among the track sections, the nearest figure, but the datasheet does not say it is the listed 92 width. Until Jawdah confirms, treat the section of Track 92 as unconfirmed.
The range data for tracks still applies: hot-dip galvanised steel complying with ASTM A653M, thickness from 0.35 up to 0.9 mm with other thicknesses on request, a 3000 mm standard length, and humidity testing of the raw material according to EN ISO 6270-2.
Choose Track 92 when your partition uses Stud 90, the stud Jawdah lists beside it. Track 102 is the nearest wider width with a section named in the datasheet, and Track 77 the nearest narrower one. Confirm the track section, stud pairing and steel thickness with the quotation.
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard. The track is used in:
- Floor and ceiling channels for deeper partitions with more services in the cavity.
- Runners for plant-room and service-zone walls framed in light gauge steel, as is typical practice.
- Partitions specified with a 90 stud once Jawdah has confirmed the track section.
Installation
Installation notes
The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:
- Store profiles flat and dry, away from site water
- Wear eye protection when cutting metal
- Use profiles and accessories from the same system
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size (product list) | 92 | Jawdah product list |
| Section (datasheet) | Not specified in the supplied datasheet | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Track 92 is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
- Role: the track fixed to the floor and soffit that holds the studs.
- Section for this size: not specified in the supplied datasheet.
- Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
- Other sizes listed: 42, 52, 66, 72, 75, 77, 102, 125, 152.
RFQ / BOQ checklist
- Profile and size (Track 92)
- Steel thickness
- Length and quantity
- Board type and layers the system carries
- Accessories needed (clips, rods, anchors, screws)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
The datasheet does not state this. It lists a 24x94x24 mm track section, while the product list shows 92. Jawdah confirms the actual section with the quotation.
Only the data shared by every track: steel to ASTM A653M, hot-dip galvanised, in thicknesses from 0.35 up to 0.9 mm (others on request) and 3000 mm standard lengths.
Track 77 (24x77x24 mm) and Track 102 (24x102x24 mm) have sections in the datasheet. Compare them if a documented width suits your stud.

Next step
Request a quotation for Track 92
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
