Track · 77
Track 77 – Partition Metal Profile
Track 77 is a floor and ceiling channel from Jawdah whose datasheet section is 24x77x24 mm, the widest documented track in the middle band.
- Size
- 77
- Section
- 24x77x24 mm
- Material
- Galvanised steel
- Length
- 3000 mm
Overview
Quick answer
Track 77 is a hot-dip galvanised steel channel that holds the studs of gypsum board partitions at floor and ceiling. It is sixth among Jawdah's ten listed track widths, and the datasheet records its section as 24x77x24 mm. Shared range data adds steel complying with ASTM A653M, thickness from 0.35 up to 0.9 mm with others on request, and a 3000 mm standard length.
Overview
About Track 77 – Partition Metal Profile
Track 77 is the channel Jawdah lists beside Stud 75, a stud size many partition drawings use. It follows Track 75 and precedes Track 92, and unlike both of those widths it has a section in the datasheet: 24x77x24 mm. For a mid-depth partition that needs documented framing at head and base, this is the width to specify.
Track 77 is the horizontal member that receives the studs, formed from hot-dip galvanised steel complying with ASTM A653M. Jawdah's data sheet lists its section as 24x77x24 mm.
Documentation around it is patchy. Track 75 just below and Track 92 just above have no named section, so Track 77 is the last fully documented width before the datasheet's wider entries. For buyers who need published dimensions in this band, that is the deciding factor.
Range figures that apply include a 3000 mm standard length and steel from 0.35 up to 0.9 mm thick, with other thicknesses on request. The raw material is referenced to BS 476 Part 6 – 1989, Class 1 surface spread of flame under BS 476 Part 7 – 1997, and EN ISO 6270-2 for humidity.
Pick Track 77 for partitions framed with Stud 75. Track 72 is the documented width below it; Track 75 and Track 92 need their sections confirmed. Agree the pairing, the steel thickness and the quantities with Jawdah in the quotation.
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard. The track is used in:
- Head and base channels for general interior partitions using a 75 stud.
- Runners for insulated partitions of moderate depth.
- Channels for walls carrying electrical and data runs inside the frame.
Installation
Installation notes
The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:
- Store profiles flat and dry, away from site water
- Wear eye protection when cutting metal
- Use profiles and accessories from the same system
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size (product list) | 77 | Jawdah product list |
| Section (datasheet) | 24x77x24 mm | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Track 77 is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
- Role: the track fixed to the floor and soffit that holds the studs.
- Datasheet section for this size: 24x77x24 mm.
- Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
- Other sizes listed: 42, 52, 66, 72, 75, 92, 102, 125, 152.
RFQ / BOQ checklist
- Profile and size (Track 77)
- Steel thickness
- Length and quantity
- Board type and layers the system carries
- Accessories needed (clips, rods, anchors, screws)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
The datasheet lists a 24x77x24 mm section in hot-dip galvanised steel complying with ASTM A653M.
Track 77 has a datasheet section and Track 75 does not. Choose by the stud in your design first, then by whether you need documented dimensions.
Jawdah's product list includes Stud 75. Confirm the pairing and thickness with the quotation.

Next step
Request a quotation for Track 77
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
