Jawdah Industrial Co. Ltd.

Track · 152

Track 152 – Partition Metal Profile

Track 152 is the widest channel on Jawdah's track list, a galvanised steel floor and ceiling profile whose section Jawdah confirms on request.

Size
152
Material
Galvanised steel
Length
3000 mm

Overview

Quick answer

Track 152 tops Jawdah's list of ten drywall track widths. It is a galvanised steel channel that holds the studs of very deep partitions at floor and ceiling. The datasheet names no 152 section, so its dimensions are confirmed with the quotation. Range data states hot-dip galvanised steel complying with ASTM A653M, 0.35 up to 0.9 mm thickness with others on request, and a 3000 mm standard length.

Overview

About Track 152 – Partition Metal Profile

At the far end of Jawdah's track list, Track 152 is the channel for the deepest partitions in the system. Jawdah lists Stud 150 beside it. Neither has a section in the datasheet, so the exact profile is agreed with Jawdah at quotation. The shared material, thickness and length data still apply, and the narrower widths give documented alternatives.

Track 152 is the largest of the ten track widths on Jawdah's product list. It is fixed at floor and ceiling to receive the studs where a very deep cavity is part of the design.

The datasheet names no 152 track section. Its widest track entries are 24x94x24 mm and 24x102x24 mm, neither of which describes this width. Jawdah therefore confirms the section with the quotation, and it should not be scaled up from smaller tracks.

What the datasheet gives for the whole track range applies here: hot-dip galvanised steel complying with ASTM A653M, steel from 0.35 up to 0.9 mm thick with other thicknesses on request, a 3000 mm standard length, and humidity testing of the raw material to EN ISO 6270-2.

Choose Track 152 only for partitions framed with Stud 150, the widest listed stud. Track 125 is the next width down; both need their sections confirmed. If documented dimensions are required, Track 102 is the widest track with a datasheet section. Confirm the pairing and thickness with the quotation.

Types

Sizes and variants

This page is the 152 size.

Other track sizes: Track 42, Track 52, Track 66, Track 72 and Track 75.

Other track sizes: Track 77, Track 92, Track 102 and Track 125.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard. The track is used in:

  • Floor and ceiling channels for very deep partitions housing large services or thick insulation.
  • Runners for walls drawn with a 150 stud in industrial, healthcare or commercial buildings.
  • Shaft and plant-room wall framing where a wide light steel channel is typical practice.

Installation

Installation notes

The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:

  • Store profiles flat and dry, away from site water
  • Wear eye protection when cutting metal
  • Use profiles and accessories from the same system

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Track 152 – Partition Metal Profile: recorded data
PropertyValueSource
Size (product list)152Jawdah product list
Section (datasheet)Not specified in the supplied datasheetDatasheet
Steel thickness0.35 up to 0.9 mm; other thicknesses on requestDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. Track 152 is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
  2. Role: the track fixed to the floor and soffit that holds the studs.
  3. Section for this size: not specified in the supplied datasheet.
  4. Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
  5. Other sizes listed: 42, 52, 66, 72, 75, 77, 92, 102, 125.

RFQ / BOQ checklist

  • Profile and size (Track 152)
  • Steel thickness
  • Length and quantity
  • Board type and layers the system carries
  • Accessories needed (clips, rods, anchors, screws)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • It is the widest on Jawdah's product list, which runs from 42 up to 152.

  • The datasheet names track sections only up to 24x102x24 mm. Jawdah confirms the section of the 152 width with the quotation.

  • Jawdah's product list includes Stud 150. Confirm the stud and track sections and the steel thickness when you request the quotation.

Next step

Request a quotation for Track 152

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.