Jawdah Industrial Co. Ltd.

Track · 125

Track 125 – Partition Metal Profile

Track 125 is one of the two widest channels on Jawdah's track list, and its section is confirmed by Jawdah on request rather than taken from the datasheet.

Size
125
Material
Galvanised steel
Length
3000 mm

Overview

Quick answer

Track 125 is a wide galvanised steel floor and ceiling channel for gypsum board partitions, second-largest of the ten widths Jawdah lists. The datasheet names no section for it; its widest track entry is 24x102x24 mm. Range data covering the tracks states hot-dip galvanised steel complying with ASTM A653M, 0.35 up to 0.9 mm thickness and a 3000 mm standard length.

Overview

About Track 125 – Partition Metal Profile

Track 125 serves partitions deeper than any documented channel allows. It sits between Track 102 and Track 152 on Jawdah's list, beside Stud 123. The datasheet stops naming track sections at 24x102x24 mm, so the exact profile of the 125 width is confirmed with the quotation. Material and length follow the data shared across the track range.

Track 125 is a horizontal channel for drywall partitions with a deep cavity, listed by Jawdah as the ninth of ten widths.

The datasheet's track sections end at 24x102x24 mm; the 24x94x24 mm entry is the only other wide one, so neither describes this width. Jawdah confirms the section with the quotation, and it should not be estimated from Track 102 or Track 152.

Range data for all tracks covers hot-dip galvanised steel complying with ASTM A653M, thickness from 0.35 up to 0.9 mm with other thicknesses on request, and a 3000 mm standard length. The datasheet also gives raw-material references to BS 476 Part 6 – 1989, Class 1 under BS 476 Part 7 – 1997, and EN ISO 6270-2.

Choose Track 125 when the partition is framed with Stud 123, which Jawdah lists beside it, and the design needs more depth than Track 102 provides. Both the track and that stud need their sections confirmed. If documented dimensions are required, Track 102 is the widest track with a named section.

Types

Sizes and variants

This page is the 125 size.

Other track sizes: Track 42, Track 52, Track 66, Track 72 and Track 75.

Other track sizes: Track 77, Track 92, Track 102 and Track 152.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard. The track is used in:

  • Floor and ceiling channels for deep partitions carrying large pipes or ducts.
  • Runners for walls drawn with a 123 stud in commercial or institutional projects.
  • Service-wall framing where a wide channel is typically chosen, subject to the system design.

Installation

Installation notes

The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:

  • Store profiles flat and dry, away from site water
  • Wear eye protection when cutting metal
  • Use profiles and accessories from the same system

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Track 125 – Partition Metal Profile: recorded data
PropertyValueSource
Size (product list)125Jawdah product list
Section (datasheet)Not specified in the supplied datasheetDatasheet
Steel thickness0.35 up to 0.9 mm; other thicknesses on requestDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. Track 125 is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
  2. Role: the track fixed to the floor and soffit that holds the studs.
  3. Section for this size: not specified in the supplied datasheet.
  4. Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
  5. Other sizes listed: 42, 52, 66, 72, 75, 77, 92, 102, 152.

RFQ / BOQ checklist

  • Profile and size (Track 125)
  • Steel thickness
  • Length and quantity
  • Board type and layers the system carries
  • Accessories needed (clips, rods, anchors, screws)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • No section is named for 125. The widest track section in the datasheet is 24x102x24 mm, so this width is confirmed with the quotation.

  • Both are listed and neither has its own datasheet section. Track 125 is the narrower one; confirm the section of whichever you specify.

  • Jawdah's product list includes Stud 123. Confirm the pairing, the sections and the steel thickness with the quotation.

Next step

Request a quotation for Track 125

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.