Jawdah Industrial Co. Ltd.

Track · 72

Track 72 – Partition Metal Profile

Track 72 is a hot-dip galvanised partition runner that Jawdah's data sheet records as 24x72x24 mm, in the middle band of the listed track widths.

Size
72
Section
24x72x24 mm
Material
Galvanised steel
Length
3000 mm

Overview

Quick answer

Track 72 is a horizontal metal channel for gypsum board walls. Jawdah lists it as size 72 and the datasheet documents a 24x72x24 mm section. The steel is hot-dip galvanised and complies with ASTM A653M. The range comes in a 3000 mm standard length and thicknesses of 0.35 up to 0.9 mm, with others on request.

Overview

About Track 72 – Partition Metal Profile

Three track widths cluster in the middle of Jawdah's list: 72, 75 and 77. Track 72 is the narrowest of them and one of two with a section named in the datasheet, 24x72x24 mm. It is listed beside Stud 70, so if your partition uses that stud, this is usually the channel to price first.

Track 72 is formed from hot-dip galvanised steel complying with ASTM A653M and fixed at floor and ceiling to hold the studs in line. The datasheet gives its section as 24x72x24 mm.

The close neighbours are what matter here. Track 75 is a touch wider but has no datasheet section, while Track 77 does. The choice among them follows the stud, and also whether you need dimensions that are on record, as they are for 72 and 77, or are content to confirm them with Jawdah.

Range data applies too: a 3000 mm standard length, steel from 0.35 up to 0.9 mm thick with other thicknesses on request, and humidity testing of the raw material according to EN ISO 6270-2.

Track 72 suits a partition built with Stud 70, the stud listed beside it. Track 66 is the next size down and Track 75 the next up; of those two, only 66 has its own datasheet section. Confirm the track, thickness and quantities with the quotation.

Types

Sizes and variants

This page is the 72 size.

Other track sizes: Track 42, Track 52, Track 66, Track 75 and Track 77.

Other track sizes: Track 92, Track 102, Track 125 and Track 152.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard. The track is used in:

  • Floor and ceiling runners for interior partitions framed with a 70 stud.
  • Channels for insulated partitions, where mid-width framing is common practice.
  • Head and base channels for corridor and room-dividing walls.

Installation

Installation notes

The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:

  • Store profiles flat and dry, away from site water
  • Wear eye protection when cutting metal
  • Use profiles and accessories from the same system

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Track 72 – Partition Metal Profile: recorded data
PropertyValueSource
Size (product list)72Jawdah product list
Section (datasheet)24x72x24 mmDatasheet
Steel thickness0.35 up to 0.9 mm; other thicknesses on requestDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. Track 72 is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
  2. Role: the track fixed to the floor and soffit that holds the studs.
  3. Datasheet section for this size: 24x72x24 mm.
  4. Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
  5. Other sizes listed: 42, 52, 66, 75, 77, 92, 102, 125, 152.

RFQ / BOQ checklist

  • Profile and size (Track 72)
  • Steel thickness
  • Length and quantity
  • Board type and layers the system carries
  • Accessories needed (clips, rods, anchors, screws)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Yes. The datasheet names a 24x72x24 mm track section matching this listed size.

  • Track 72 has a datasheet section; Track 75 does not, so its section is confirmed with the quotation. Both share the same steel and length data.

  • Jawdah's product list includes Stud 70. Confirm the pairing and the steel thickness with Jawdah when you order.

Next step

Request a quotation for Track 72

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.