Stud · 70
Stud 70 – Partition Metal Profile
Stud 70 is a hot-dip galvanised partition stud that Jawdah's data sheet records as a 35x70x34 mm section, in the middle band of the listed sizes.
- Size
- 70
- Section
- 35x70x34 mm
- Material
- Galvanised steel
- Length
- 3000 mm
Overview
Quick answer
Stud 70 is a vertical metal profile for gypsum board walls. Jawdah lists it as size 70, and the datasheet documents a 35x70x34 mm section for it. The steel is hot-dip galvanised and complies with ASTM A653M. The profile range has a 3000 mm standard length and thicknesses of 0.35 up to 0.9 mm, with others on request.
Overview
About Stud 70 – Partition Metal Profile
In the middle band of Jawdah's stud list there are three sizes close together: 70, 73 and 75. Of these, Stud 70 is the narrowest and one of the two with a datasheet section, recorded as 35x70x34 mm. If your drawings say 70, this is the page to specify from, and the details below set out what is documented.
Stud 70 is formed from hot-dip galvanised steel complying with ASTM A653M and carries gypsum boards on a drywall partition. The datasheet names its section as 35x70x34 mm.
What sets this size apart is how close its neighbours are. Stud 73 is only slightly wider but has no section of its own in the datasheet, while Stud 75 does have one. Choosing between them therefore comes down to the drawings, and to whether you need the documented geometry that the 70 and 75 sizes carry.
The range data applies here as well: a 3000 mm standard length, steel thickness of 0.35 up to 0.9 mm with other thicknesses on request, and humidity testing of the raw material according to EN ISO 6270-2.
Stud 70 suits partitions drawn with a 70 stud. Stud 64 is the next size down and Stud 73 the next size up; only 64 has its own datasheet section among those two. Jawdah's product list includes a Track 72 alongside this stud. Confirm the track, steel thickness and quantities with the quotation.
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard. The stud is used in:
- Interior partitions in commercial and residential projects that specify a 70 stud.
- Partitions where insulation is placed in the cavity, as is common practice for wider studs.
- Corridor and room-dividing walls framed in light gauge steel.
Installation
Installation notes
The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:
- Store profiles flat and dry, away from site water
- Wear eye protection when cutting metal
- Use profiles and accessories from the same system
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size (product list) | 70 | Jawdah product list |
| Section (datasheet) | 35x70x34 mm | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Stud 70 is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
- Role: the vertical member of a drywall partition that carries the boards on both faces.
- Datasheet section for this size: 35x70x34 mm.
- Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
- Other sizes listed: 40, 50, 64, 73, 75, 90, 100, 123, 150.
RFQ / BOQ checklist
- Profile and size (Stud 70)
- Steel thickness
- Length and quantity
- Board type and layers the system carries
- Accessories needed (clips, rods, anchors, screws)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
Yes. The datasheet names a 35x70x34 mm stud section, which corresponds to this listed size.
Stud 70 has a datasheet section; Stud 73 does not, so its dimensions are confirmed with the quotation. Both share the same steel and length data.
Jawdah's product list includes a Track 72. Confirm that pairing and the steel thickness with Jawdah when you order.

Next step
Request a quotation for Stud 70
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
