Jawdah Industrial Co. Ltd.

Stud · 73

Stud 73 – Partition Metal Profile

Stud 73 is a listed size in Jawdah's partition stud range whose section is not named in the datasheet and is confirmed by Jawdah on request.

Size
73
Material
Galvanised steel
Length
3000 mm

Overview

Quick answer

Stud 73 is a galvanised steel drywall stud on Jawdah's product list, placed between Stud 70 and Stud 75. The datasheet does not name a section for this size, so its exact dimensions are confirmed with the quotation. The range data that covers all studs gives hot-dip galvanised steel complying with ASTM A653M, a 3000 mm standard length and thickness from 0.35 up to 0.9 mm.

Overview

About Stud 73 – Partition Metal Profile

Stud 73 is easy to overlook because it falls between two documented sizes. Jawdah does list it, but the datasheet gives no section under this size, so a buyer cannot read its exact dimensions from the published data. What can be said with confidence is the material and length data shared by the whole stud range, set out below.

This page covers the 73 size of Jawdah's Stud, the vertical profile in a gypsum board partition. It appears on the product list, but the supplied datasheet does not name a 73 section. Its dimensions are therefore confirmed by Jawdah with the quotation rather than taken from Stud 70 or Stud 75.

The data that does apply comes from the stud range as a whole. Those profiles are hot-dip galvanised steel complying with ASTM A653M, made in thicknesses of 0.35 up to 0.9 mm with others on request, and supplied in a 3000 mm standard length. The raw-material references are BS 476 Part 6 – 1989, Class 1 surface spread of flame under BS 476 Part 7 – 1997, and EN ISO 6270-2.

Treat these as range figures, not as measured values for this size.

Specify Stud 73 only when your drawings call for it, and ask Jawdah to confirm its section before ordering. If a documented size will do, Stud 70 and Stud 75 both have datasheet sections and sit on either side of it. Jawdah's product list includes a Track 75 in the track range; confirm whether it pairs with this stud.

Types

Sizes and variants

This page is the 73 size.

Other stud sizes: Stud 40, Stud 50, Stud 64, Stud 70 and Stud 75.

Other stud sizes: Stud 90, Stud 100, Stud 123 and Stud 150.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard. The stud is used in:

  • Partitions designed around a 73 stud, typically in replacement or matching work on existing framing.
  • Interior drywall walls where the project specification names this exact size.
  • Metal-framed linings once the section has been confirmed with Jawdah.

Installation

Installation notes

The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:

  • Store profiles flat and dry, away from site water
  • Wear eye protection when cutting metal
  • Use profiles and accessories from the same system

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Stud 73 – Partition Metal Profile: recorded data
PropertyValueSource
Size (product list)73Jawdah product list
Section (datasheet)Not specified in the supplied datasheetDatasheet
Steel thickness0.35 up to 0.9 mm; other thicknesses on requestDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. Stud 73 is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
  2. Role: the vertical member of a drywall partition that carries the boards on both faces.
  3. Section for this size: not specified in the supplied datasheet.
  4. Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
  5. Other sizes listed: 40, 50, 64, 70, 75, 90, 100, 123, 150.

RFQ / BOQ checklist

  • Profile and size (Stud 73)
  • Steel thickness
  • Length and quantity
  • Board type and layers the system carries
  • Accessories needed (clips, rods, anchors, screws)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • No. The datasheet names sections for other stud sizes but not 73, so Jawdah confirms the section with the quotation.

  • Range data for the studs: hot-dip galvanised steel complying with ASTM A653M, 0.35 up to 0.9 mm thickness, other thicknesses on request, and a 3000 mm standard length.

  • Use 73 if the drawings specify it. If they allow either neighbour, Stud 70 and Stud 75 have datasheet sections you can review before ordering.

Next step

Request a quotation for Stud 73

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.