Jawdah Industrial Co. Ltd.

Stud · 150

Stud 150 – Partition Metal Profile

Stud 150 is the widest stud on Jawdah's product list, a galvanised steel partition profile whose section Jawdah confirms on request.

Size
150
Material
Galvanised steel
Length
3000 mm

Overview

Quick answer

Stud 150 tops Jawdah's list of ten drywall stud sizes. It is a vertical galvanised steel profile for very deep partitions. The datasheet does not name a 150 section, so its dimensions are confirmed with the quotation. Range data covering the studs states hot-dip galvanised steel complying with ASTM A653M, 0.35 up to 0.9 mm thickness with others on request, and a 3000 mm standard length.

Overview

About Stud 150 – Partition Metal Profile

At the top of Jawdah's stud list, Stud 150 is the profile for the deepest partitions in the range. It is listed, but the datasheet does not give it a section, so its exact form is agreed with Jawdah when you request a price. The shared material, thickness and length data still apply, and the narrower sizes offer documented alternatives.

Stud 150 is the largest of the ten stud sizes on Jawdah's product list. It is the upright member for gypsum board partitions where a very deep cavity is part of the design.

No 150 stud section is named in the datasheet; the widest stud entry it gives is 35x100x34 mm. Jawdah therefore confirms the section of this size with the quotation, and it should not be scaled from smaller sizes.

What the datasheet gives for the whole stud range applies here: hot-dip galvanised steel complying with ASTM A653M, steel from 0.35 up to 0.9 mm thick with other thicknesses on request, a 3000 mm standard length, and humidity testing of the raw material to EN ISO 6270-2.

Choose Stud 150 only when the design needs the widest listed stud. Stud 123 is the next size down; both need their sections confirmed. If documented dimensions are required, Stud 100 is the widest size with a datasheet section. Jawdah's product list includes a Track 152; confirm the pairing with the quotation.

Types

Sizes and variants

This page is the 150 size.

Other stud sizes: Stud 40, Stud 50, Stud 64, Stud 70 and Stud 73.

Other stud sizes: Stud 75, Stud 90, Stud 100 and Stud 123.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard. The stud is used in:

  • Very deep partitions that house large services or thick insulation layers.
  • Walls drawn with a 150 stud in industrial, healthcare or commercial buildings.
  • Shaft and plant-room walls where a wide light steel frame is typical practice.

Installation

Installation notes

The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:

  • Store profiles flat and dry, away from site water
  • Wear eye protection when cutting metal
  • Use profiles and accessories from the same system

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Stud 150 – Partition Metal Profile: recorded data
PropertyValueSource
Size (product list)150Jawdah product list
Section (datasheet)Not specified in the supplied datasheetDatasheet
Steel thickness0.35 up to 0.9 mm; other thicknesses on requestDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. Stud 150 is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
  2. Role: the vertical member of a drywall partition that carries the boards on both faces.
  3. Section for this size: not specified in the supplied datasheet.
  4. Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
  5. Other sizes listed: 40, 50, 64, 70, 73, 75, 90, 100, 123.

RFQ / BOQ checklist

  • Profile and size (Stud 150)
  • Steel thickness
  • Length and quantity
  • Board type and layers the system carries
  • Accessories needed (clips, rods, anchors, screws)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • It is the largest on Jawdah's product list, which runs from 40 up to 150.

  • The datasheet names stud sections only up to 35x100x34 mm. The section of the 150 size is confirmed by Jawdah with the quotation.

  • Jawdah's product list includes a Track 152. Confirm the track, the stud section and the steel thickness when you request the quotation.

Next step

Request a quotation for Stud 150

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.