Stud · 90
Stud 90 – Partition Metal Profile
Stud 90 is a wider partition stud on Jawdah's product list; the datasheet does not name a 90 section, so Jawdah confirms its dimensions on request.
- Size
- 90
- Material
- Galvanised steel
- Length
- 3000 mm
Overview
Quick answer
Stud 90 is a hot-dip galvanised steel stud listed by Jawdah for deeper drywall partitions. The datasheet has no section labelled 90. It does include a 35x92x34 mm stud section, but it does not tie that entry to this size, so the section is confirmed with the quotation. Range data gives steel complying with ASTM A653M, 0.35 up to 0.9 mm thick, in a 3000 mm length.
Overview
About Stud 90 – Partition Metal Profile
Stud 90 is the first of the wider sizes in Jawdah's stud list. Its documentation needs care: the datasheet carries a 35x92x34 mm stud section, while the product list shows 90. The two may or may not be the same profile, and this page does not assume either way. Ask Jawdah to confirm the section before you finalise drawings.
Stud 90 is a vertical member for gypsum board partitions where more cavity depth is wanted than the mid-range sizes give. Jawdah lists it as 90.
The datasheet does not name a 90 stud. It does list a 35x92x34 mm section among the stud entries, which is the closest figure, but the datasheet does not state that this entry is the listed 90 size. Until Jawdah confirms, treat the section of Stud 90 as unconfirmed.
Range-level data for the studs still applies: hot-dip galvanised steel complying with ASTM A653M, thickness from 0.35 up to 0.9 mm with other thicknesses on request, a 3000 mm standard length, and humidity testing of the raw material according to EN ISO 6270-2.
Choose Stud 90 when the design calls for a wider stud than 75 but narrower than 100. Stud 100 is the nearest size with a section named in the datasheet. Jawdah's product list includes a Track 92; confirm the stud section, the track pairing and the steel thickness with the quotation.
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard. The stud is used in:
- Deeper interior partitions where services or insulation need more cavity space.
- Walls around plant rooms and service zones framed in light gauge steel, as is typical practice.
- Partitions specified with a 90 stud once Jawdah has confirmed its section.
Installation
Installation notes
The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:
- Store profiles flat and dry, away from site water
- Wear eye protection when cutting metal
- Use profiles and accessories from the same system
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size (product list) | 90 | Jawdah product list |
| Section (datasheet) | Not specified in the supplied datasheet | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Stud 90 is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
- Role: the vertical member of a drywall partition that carries the boards on both faces.
- Section for this size: not specified in the supplied datasheet.
- Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
- Other sizes listed: 40, 50, 64, 70, 73, 75, 100, 123, 150.
RFQ / BOQ checklist
- Profile and size (Stud 90)
- Steel thickness
- Length and quantity
- Board type and layers the system carries
- Accessories needed (clips, rods, anchors, screws)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
The datasheet does not say so. It lists a 35x92x34 mm stud section, while the product list shows 90. Jawdah confirms the actual section with the quotation.
Range data: hot-dip galvanised steel complying with ASTM A653M, 0.35 up to 0.9 mm thickness with others on request, and a 3000 mm standard length.
Stud 100 has a datasheet section of 35x100x34 mm, and Stud 75 has 35x75x34 mm. Compare them if a documented size suits the design.

Next step
Request a quotation for Stud 90
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
