Jawdah Industrial Co. Ltd.

Stud · 64

Stud 64 – Partition Metal Profile

Stud 64 is a mid-light partition stud from Jawdah, recorded in the datasheet as a 35x64x34 mm hot-dip galvanised steel section.

Size
64
Section
35x64x34 mm
Material
Galvanised steel
Length
3000 mm

Overview

Quick answer

Stud 64 is one of the ten drywall stud sizes on Jawdah's product list, third from the narrow end. The datasheet gives its section as 35x64x34 mm. Like the rest of the range, it is hot-dip galvanised steel complying with ASTM A653M, supplied in a 3000 mm standard length, with steel from 0.35 up to 0.9 mm thick.

Overview

About Stud 64 – Partition Metal Profile

Stud 64 bridges the slim studs and the wider mid-range profiles. In Jawdah's list it follows 40 and 50 and comes before 70. The datasheet names a 35x64x34 mm section for it, so its geometry is on record. That makes it a straightforward choice to specify when the partition depth falls in this band.

The 64 size is a vertical drywall profile with a datasheet section of 35x64x34 mm. It is formed from hot-dip galvanised steel complying with ASTM A653M, and the profile range comes in a standard length of 3000 mm.

Its neighbours on the list are Stud 50 below and Stud 70 above, both with datasheet sections of their own. Against Stud 50 it offers a deeper web; against Stud 70 it is a few millimetres narrower. The difference between these three sizes is only in that middle dimension, since the steel, length and thickness data are shared.

Steel thickness for the range is 0.35 up to 0.9 mm, with other thicknesses on request. The raw-material references in the datasheet are BS 476 Part 6 – 1989, a Class 1 surface spread of flame under BS 476 Part 7 – 1997, and EN ISO 6270-2 for humidity.

Use Stud 64 when the specified partition sits between the slim sizes and Stud 70. If your drawings call for 70, choose that page instead; the datasheet documents both. Jawdah's product list includes a Track 66 that sits next to this stud in width. Confirm the track pairing and the steel thickness when you request the quotation.

Types

Sizes and variants

This page is the 64 size.

Other stud sizes: Stud 40, Stud 50, Stud 70, Stud 73 and Stud 75.

Other stud sizes: Stud 90, Stud 100, Stud 123 and Stud 150.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard. The stud is used in:

  • Standard interior partitions in offices, retail units and residential fit-outs.
  • Partitions with a modest cavity for electrical cables and small pipes.
  • Metal-framed linings where a mid-light stud is specified on the drawings.

Installation

Installation notes

The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:

  • Store profiles flat and dry, away from site water
  • Wear eye protection when cutting metal
  • Use profiles and accessories from the same system

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Stud 64 – Partition Metal Profile: recorded data
PropertyValueSource
Size (product list)64Jawdah product list
Section (datasheet)35x64x34 mmDatasheet
Steel thickness0.35 up to 0.9 mm; other thicknesses on requestDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. Stud 64 is listed under Jawdah Drywall Solutions, Partition Metal Profiles.
  2. Role: the vertical member of a drywall partition that carries the boards on both faces.
  3. Datasheet section for this size: 35x64x34 mm.
  4. Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
  5. Other sizes listed: 40, 50, 70, 73, 75, 90, 100, 123, 150.

RFQ / BOQ checklist

  • Profile and size (Stud 64)
  • Steel thickness
  • Length and quantity
  • Board type and layers the system carries
  • Accessories needed (clips, rods, anchors, screws)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • The datasheet records Stud 64 as a 35x64x34 mm section in hot-dip galvanised steel complying with ASTM A653M.

  • It is the third of ten listed sizes, after 40 and 50 and before 70. The list goes up to 150.

  • Jawdah's product list includes a Track 66. Confirm the pairing, together with the steel thickness, with the quotation.

Next step

Request a quotation for Stud 64

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.