Jawdah Industrial Co. Ltd.

W-Angle · 25x25

W-Angle 25x25 – Ceiling Metal Profile

W-Angle 25x25 is Jawdah's W-shaped ceiling perimeter angle with a 25x25x25x25 mm section, the larger of its two listed W-angle sizes.

Size
25x25
Section
25x25x25x25 mm
Material
Galvanised steel
Length
3000 mm

Overview

Quick answer

W-Angle 25x25 from Jawdah is a hot-dip galvanised steel perimeter angle used at the edges of suspended gypsum ceilings. The drywall suspension datasheet gives its section as 25x25x25x25 mm, which corresponds to this size. It is made in steel from 0.35 up to 0.8 mm and supplied in 3000 mm standard lengths.

Overview

About W-Angle 25x25 – Ceiling Metal Profile

This is the W-angle with published dimensions. The datasheet lists a 25x25x25x25 mm section, and that matches the 25x25 size on this page, while the smaller 20x20 size has no datasheet section. For specifiers who need numbers on the drawing, that makes 25x25 the straightforward pick for a W-shaped ceiling edge.

Fixed at the ceiling perimeter, W-Angle 25x25 forms the edge of a suspended gypsum ceiling where the detail asks for a W-shaped profile rather than a plain L-Angle. Its section, 25x25x25x25 mm, is given in Jawdah's drywall suspension datasheet.

The steel is hot-dip galvanised and complies with ASTM A653M. For W-angles the datasheet gives 0.35 up to 0.8 mm, a narrower upper limit than the other ceiling profiles, and it does not mention other thicknesses. The standard length is 3000 mm.

Raw-material references are BS 476 Part 6 – 1989 for fire, Class 1 surface flame spread under BS 476 Part 7 – 1997, and EN ISO 6270-2 for humidity. They describe the steel, not the ceiling as built.

Choose 25x25 when you want the W-angle whose section is published, 25x25x25x25 mm. The 20x20 size is smaller, and its section is confirmed only on request. If a plain right-angle edge suits the detail, compare the L-Angle instead. Confirm steel thickness within 0.35 to 0.8 mm with Jawdah.

Types

Sizes and variants

This page is the 25x25 size.

Other w-angle sizes: W-Angle 20x20.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard. The w-angle is used in:

  • W-shaped perimeter edges of suspended gypsum ceilings specified at 25x25
  • Edge trim for drywall bulkheads and ceiling level changes
  • Wall junctions of ceilings boarded with Jawdah gypsum boards

Installation

Installation notes

The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:

  • Store profiles flat and dry, away from site water
  • Wear eye protection when cutting metal
  • Use profiles and accessories from the same system

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

W-Angle 25x25 – Ceiling Metal Profile: recorded data
PropertyValueSource
Size (product list)25x25Jawdah product list
Section (datasheet)25x25x25x25 mmDatasheet
Steel thickness0.35 up to 0.8 mmDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. W-Angle 25x25 is listed under Jawdah Drywall Solutions, Ceiling Metal Profiles.
  2. Role: a perimeter angle used at the edges of the ceiling.
  3. Datasheet section for this size: 25x25x25x25 mm.
  4. Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
  5. Other sizes listed: 20x20.

RFQ / BOQ checklist

  • Profile and size (W-Angle 25x25)
  • Steel thickness
  • Length and quantity
  • Board type and layers the system carries
  • Accessories needed (clips, rods, anchors, screws)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • The drywall suspension datasheet lists a 25x25x25x25 mm W-angle section, which corresponds to the 25x25 size.

  • Its section is published in the datasheet. The 20x20 size has no datasheet section, so its dimensions must be confirmed by Jawdah first.

  • The datasheet gives 0.35 up to 0.8 mm for W-angles and does not mention other thicknesses. Ask Jawdah if your design needs something else.

Next step

Request a quotation for W-Angle 25x25

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.