Jawdah Industrial Co. Ltd.

Ceiling Accessories · Adjustment Clip

Adjustment Clip for Ceiling Rod Hangers

The Jawdah adjustment clip, listed as the rod hanger clip, is a 1 mm thick galvanised steel clip that grips the rod hanger and lets the installer set the ceiling height.

Listed as
Rod hanger clip
Thickness
1 mm
Material
Galvanised steel

Overview

Quick answer

An adjustment clip is the small clip that holds a ceiling rod hanger at a chosen height and connects it to the grid. Jawdah lists it as the rod hanger clip, in galvanised steel 1 mm thick. It is named with rod hangers and anchor bolts in the T-Grid, gypsum tile and Standard Clip-In data sheets.

Overview

Where the adjustment clip fits

It sits where the hanger meets the grid, so it is the part that turns a rough hanging point into a level ceiling. Order one clip for every rod hanger in the schedule.

A suspended ceiling is only as level as its adjustment points. Anchors in the soffit are set at slightly different heights, slabs deflect, and hangers are cut in batches, so the final ceiling level is set at the bottom of each hanger. The adjustment clip does that job: it grips the rod hanger, connects to the main runner or channel, and can be moved along the rod until the grid sits on line.

Once the grid is level, the clip holds that position while tiles are laid in. This is why the clip matters more than its size suggests: a clip that slips lets one hanging point drop, and the result shows as a dip in the ceiling line. The adjustment clip is one of the seven items in the Ceiling Accessories item list and always works with a rod hanger.

Applications

Systems that list adjustment clips

The data sheets for the T-Grid system, plain gypsum ceiling tiles and acoustical perforated gypsum tiles list adjustment clips with rod hangers and anchor bolts as suspension accessories. The Clip-In system data sheet lists the same three for its Standard set. The clip suits the Ø3.8 mm rod hanger it is listed with; the Advanced Clip-In set adjusts height with nuts on threaded rod instead.

Installation

Levelling with adjustment clips

As general practice, hang the rod hangers plumb, fit a clip on each hanger and connect it to the main runner, then set a level line with a laser and bring every clip to that line. Check the grid again after cross tees are fitted and before tiles go in, because adding members can shift the level slightly. Do not over-bend the rod to force a level; move the clip instead.

Selection pitfalls

Adjustment clip mistakes

Most problems come from counting, not from the clip itself.

  • Fewer clips ordered than rod hangers
  • Clips paired with a different hanger diameter than the one listed
  • Levelling done before all cross members are installed
  • Clips ordered for an Advanced Clip-In ceiling that uses threaded rod

Choosing

When to order this item

Order adjustment clips for every rod hanger on T-Grid, gypsum tile and Standard Clip-In ceilings, with the matching anchor bolts. If your ceiling uses threaded rod, order the galvanized nut instead. Ask the Jawdah team for a product photo if you need to check the clip shape against your grid.

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Jawdah data

Recorded data for the adjustment clip

The Jawdah ceiling accessories list names this item 'Rod hanger clip (Adjustment Clip)' and records its material and thickness. Other properties are open points.

Adjustment clip: recorded data
PropertyValue
Listed nameRod hanger clip (Adjustment Clip)
MaterialGalvanised steel
Thickness1 mm
Clip shape and grip mechanismNot specified in the supplied data sheet
Holding capacityNot specified in the supplied data sheet

Comparison

Adjustment clip or galvanized nut?

Both set the final ceiling height, but on different hangers. The choice follows the hanger, which in turn follows the system set.

Height adjustment in the two hanging chains
PointAdjustment clipGalvanized nut
Works onRod hanger, Ø3.8 mmThreaded rod, Ø6 mm
How height is setClip moved along the rodNut turned on the thread
Recorded size1 mm thickØ6 mm
System setT-Grid, gypsum tiles, Clip-In StandardClip-In Advanced

Key facts

  1. The Jawdah adjustment clip is listed as 'Rod hanger clip (Adjustment Clip)'.
  2. It is galvanised steel, 1 mm thick.
  3. One adjustment clip is used on each rod hanger to set the ceiling height.
  4. T-Grid, gypsum tile and Standard Clip-In data sheets list adjustment clips as suspension accessories.
  5. Advanced Clip-In ceilings adjust height with nuts on threaded rod instead of clips.

RFQ / BOQ checklist

  • Suspension system and Clip-In set
  • Number of rod hangers
  • Adjustment clip quantity
  • Matching rod hangers and anchor bolts
  • Request for product photo if needed
  • Delivery location

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • It is the Jawdah listing name for the adjustment clip: the clip that grips the rod hanger and sets the ceiling height.

  • The Jawdah ceiling accessories list records it as 1 mm thick galvanised steel.

  • One per rod hanger. Count the hanging points from the ceiling layout and order the same number of clips, hangers and anchor bolts.

  • The T-Grid, plain gypsum tile, acoustical perforated gypsum tile and Standard Clip-In data sheets list adjustment clips as suspension accessories.

  • It is listed with the rod hanger. Threaded rod ceilings in the Advanced Clip-In set are adjusted with nuts instead.

  • No. Holding capacity is not specified in the supplied data; confirm it with the Jawdah team if the ceiling carries extra fittings.

Next step

Match clips to your hangers

Send the number of hanging points and the suspension system. The Jawdah team will confirm clips, hangers and anchors for your quotation.