Jawdah Industrial Co. Ltd.

L-Angle · 22

L-Angle 22 – Ceiling Metal Profile

L-Angle 22 is a 22x22 mm hot-dip galvanised steel angle fixed to the walls at ceiling level to form the edge of a suspended gypsum ceiling.

Size
22
Section
22x22 mm
Material
Galvanised steel
Length
3000 mm

Overview

Quick answer

Jawdah's L-Angle 22 is the smaller of its two L-angle sizes: a 22x22 mm section, as listed in the drywall suspension datasheet, in hot-dip galvanised steel. It is fixed to the surrounding walls at ceiling height as the perimeter member of the ceiling. Lengths are 3000 mm and steel is 0.35 up to 0.9 mm.

Overview

About L-Angle 22 – Ceiling Metal Profile

At 22x22 mm, this is the smaller L-Angle in Jawdah's product list, with size 24 the only alternative. Its section is published in the datasheet, so there is no gap to fill before ordering beyond choosing the steel thickness. The angle runs around the room on the wall face and gives the suspended ceiling a straight edge to finish against.

L-Angle 22 corresponds to the 22x22 mm section in Jawdah's drywall suspension datasheet. It is the perimeter member of the ceiling, fixed to the walls at ceiling level, while the C-channels and furring channels form the grid in the field of the ceiling.

The angle is hot-dip galvanised steel complying with ASTM A653M. The datasheet gives steel from 0.35 up to 0.9 mm, with other thicknesses on request, and a 3000 mm standard length.

Compared with size 24, the only difference the datasheet records is the section: 22x22 mm here against 24x24 mm on the sibling page. The raw-material entries are identical for both, citing BS 476 Part 6 – 1989, Class 1 surface flame spread to BS 476 Part 7 – 1997, and EN ISO 6270-2 for humidity.

Choose the 22 size when the ceiling detail shows a 22x22 mm wall angle; choose 24 if it shows 24x24 mm. Both sizes have datasheet sections, so no dimension is left open. What you should confirm with Jawdah is the steel thickness and the number of 3000 mm lengths the room perimeters need.

Types

Sizes and variants

This page is the 22 size.

Other l-angle sizes: L-Angle 24.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard. The l-angle is used in:

  • Perimeter of suspended gypsum board ceilings detailed with a 22x22 mm wall angle
  • Edge support where drywall bulkheads or level changes meet a wall
  • Ceilings finished with Jawdah gypsum boards up to a wall-fixed edge

Installation

Installation notes

The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:

  • Store profiles flat and dry, away from site water
  • Wear eye protection when cutting metal
  • Use profiles and accessories from the same system

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

L-Angle 22 – Ceiling Metal Profile: recorded data
PropertyValueSource
Size (product list)22Jawdah product list
Section (datasheet)22x22 mmDatasheet
Steel thickness0.35 up to 0.9 mm; other thicknesses on requestDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. L-Angle 22 is listed under Jawdah Drywall Solutions, Ceiling Metal Profiles.
  2. Role: the perimeter member fixed to the walls at ceiling level.
  3. Datasheet section for this size: 22x22 mm.
  4. Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
  5. Other sizes listed: 24.

RFQ / BOQ checklist

  • Profile and size (L-Angle 22)
  • Steel thickness
  • Length and quantity
  • Board type and layers the system carries
  • Accessories needed (clips, rods, anchors, screws)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • The drywall suspension datasheet lists a 22x22 mm L-angle section, which corresponds to size 22.

  • Yes. Jawdah's product list gives two L-angle sizes, and the 22x22 mm angle is the smaller one; size 24 has a 24x24 mm section.

  • It is hot-dip galvanised steel complying with ASTM A653M, in thicknesses from 0.35 up to 0.9 mm according to the datasheet.

Next step

Request a quotation for L-Angle 22

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.