Partition Access Doors · Gypsum face
Gypsum Partition Access Doors
A gypsum partition access door is a service door with a gypsum board face, set into a drywall partition or wall lining so that it can be finished and painted with the surrounding wall.
- Range versions
- Gypsum and metal
01 / Overview
Quick answer
A gypsum partition access door is a framed door faced with gypsum board, installed in a drywall partition or lining so that concealed services can be reached while the wall stays visually continuous. Jawdah supplies wall access panels in gypsum versions; sizes, frame data and the gypsum board type in the door are confirmed with Jawdah per project.
Overview
When a gypsum-faced wall door is the right choice
When a drywall wall hides a valve, cistern or junction box, a metal door in the middle of a painted wall can look out of place. A gypsum-faced door solves this by giving the access point the same surface as the wall, so that after jointing and painting only a fine shadow line remains.
Jawdah states that its access panels are supplied for walls as well as ceilings and in gypsum versions. Specifications for the gypsum partition door, including sizes, frame and board details, have not yet been published and are confirmed by the Jawdah team for each project.
Choose a gypsum face when the wall is a painted drywall finish and the access point should not draw attention: corridors, hotel rooms, offices, reception areas and residential interiors. In back-of-house or heavily used areas, a metal-faced door may be more robust; Jawdah's information indicates both gypsum and metal versions exist.
Construction
How a gypsum partition access door is built
In general, the door consists of a perimeter frame fixed into the wall opening and a door leaf carrying a gypsum board face. The frame edge is usually slim and designed to be skimmed or left as a fine reveal. The leaf is either hinged, often with concealed hinges, or lift-out with retaining cables, and is held closed by a latch or lock.
The face board should match the wall board in type so that the finished wall behaves consistently, particularly in humid areas.
02 / Performance
Specifying the gypsum door with the partition
State the partition build-up, including board type and number of layers, so the door face and frame depth can suit it. In wet rooms specify moisture resistant board for the door face if the wall uses it. If the wall will be tiled rather than painted, ask whether the door face can accept tiles, because a gypsum door is usually intended for a painted finish.
Where the partition has a fire or acoustic role, raise this at the enquiry stage, since no performance data has been published for the door.
Quality
Handover checks
Confirm each door opens fully without striking fittings, closes flush with the wall, and has the specified face board. Record door locations on the as-built wall elevations for the facility team.
03 / Applications
Typical locations
These are general uses in Saudi fit-out projects; suitability of a specific Jawdah door for each location is confirmed per project.
- Hotel bathroom walls with concealed valves and cisterns.
- Office washroom cores with plumbing ducts behind drywall.
- Corridor walls hiding electrical and data junctions.
- Residential apartments with meters inside lined shafts.
- Hospital patient areas where a discreet wall finish is preferred.
Installation
Installing and finishing the door
Frame the opening with trimmer studs and noggings. Fix the door frame to the studs, bring the wall boards up to the frame and joint the wall. Finish the door face with the same primer and paint as the wall, keeping the reveal around the leaf clean so the door can open. Check the hinge or retention action and the latch once the paint has cured.
Selection pitfalls
Avoid these errors
These mistakes usually show up as cracked joints or doors that no longer open after the wall is finished.
- A regular gypsum face on a door in a moisture resistant wet-room wall.
- Tiling over a door face intended for paint.
- Fixing the frame to board only, without trimmer studs.
- Bridging the door joint with filler during wall finishing.
Choosing
Choosing the lock for a gypsum partition door
Once the gypsum face is chosen, decide how the door is secured. For public washrooms and corridors, see the manual lock page. For staff areas and frequently opened ducts, see the automatic lock page. The partition access doors overview compares wall and ceiling access.
04 / Technical
Closer look
Detailed product imagery is being prepared.
In preparationJawdah data
Confirmed facts and open items
Jawdah's gypsum boards are produced as Regular (RG), Fire Resistant (FR), Moisture Resistant (MR) and Fire & Moisture Resistant (FMR). Which of these types can be supplied in the partition door face is to be confirmed.
- Jawdah supplies wall access panels in addition to ceiling access panels.
- Jawdah access panels are offered in gypsum and metal versions.
- Open: sizes, frame material and thickness for the partition door.
- Open: gypsum board types and thickness available in the door.
- Open: hinge or retention method and lock options.
Key facts
- A gypsum partition access door has a gypsum board face so it can be finished with a drywall wall.
- Jawdah supplies wall access panels as well as ceiling access panels.
- Both gypsum and metal versions exist in the Jawdah access panel range.
- Sizes and frame data for Jawdah gypsum partition access doors are confirmed per project.
- The door face board should match the wall board type, especially in humid areas.
RFQ / BOQ checklist
- Partition build-up: board type, layers and stud size
- Door opening sizes per location
- Door face board type to match the wall
- Wall finish: paint or tile
- Lock requirement: manual or automatic
- Fire or acoustic role of the partition
- Wall elevations showing door positions
- Delivery site in the Kingdom
05 / Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
System relationships for this product are being prepared.
Our technical team can share the current information on request.Ask the technical team
06 / FAQ
Frequently asked questions
A framed service door faced with gypsum board, set into a drywall partition or wall lining so it can be painted with the wall and give access to concealed services.
Jawdah states that its access panels are supplied for walls as well as ceilings and in gypsum and metal versions. Detailed specifications are confirmed per project.
Jawdah produces RG, FR, MR and FMR gypsum boards. Which types are available in the partition door face is confirmed by the Jawdah team.
Gypsum-faced doors are usually intended for painted walls. If the wall is to be tiled, ask Jawdah whether the door face can accept tiles before ordering.
Partition door sizes are not yet published. Give the opening sizes needed for each location for confirmation.
No fire performance data has been published for this door, so any fire requirement must be reviewed with Jawdah and the project consultant.
Manual locks suit public areas where only maintenance staff should open the wall; push-to-open automatic locks suit staff areas with frequent access.
Next step
Request gypsum partition door details
Send the partition build-up, door sizes and finish. Jawdah will confirm the gypsum door options, frame and lock arrangement for your walls.