Jawdah Industrial Co. Ltd.

Plain Gypsum Tiles · PVC 574

PVC Laminated Gypsum Ceiling Tiles — PVC 574

PVC 574 laminated gypsum ceiling tiles are Jawdah plain gypsum tiles faced with the 574 film design, used most often to replace or extend a ceiling already finished in 574.

Film
574, prefixed code as listed
Thickness
7.5 | 9.5 | 12.5 | 15 mm
Sizes
600x600 / 600x1200 mm
Grid
T-24 & T-15

Overview

Quick answer

A PVC 574 gypsum ceiling tile is a Jawdah plain, unperforated gypsum tile laminated with the 574 film, listed on the code list with a prefix. It comes in 7.5, 9.5, 12.5 and 15 mm, as RG, MR, FR or FMR, in 600x600 and 600x1200 mm for T-24 and T-15 grids. For replacements, match size, thickness and edge to the existing tiles and approve a sample on site.

Overview

Matching a ceiling that is already there

Replacement work fails when only the face is matched. A new tile must also fit the existing grid, sit level with its neighbours and suit the room it goes into. This page lists the tile facts to match and the checks to make before ordering 574 tiles for an occupied building.

Typical 574 requests come after services work, water damage or a fit-out that must continue a neighbouring area. In each case the existing ceiling sets the rules: its grid, its tile size and thickness, and a face that has aged under light and cleaning.

Start from the original film code, as listed on the PVC 574 film page, rather than from a photograph. Then confirm the tile itself, because a correct face on a tile of the wrong thickness or size will still not sit right in the grid.

Types

Other film codes on the same tile

If 574 is not the original code, compare the listings below with your records.

Film codes offered on laminated gypsum tiles
Tile pageFilm code as listedPublished film description
PVC 154Not on the published code listNone; confirmed by Jawdah
PVC 572572-WHITE and 572-1GOLDCode names only
PVC 573Listed under a prefixed codeNone; see the PVC 573 film page
PVC 574Listed under a prefixed codeNone; see the PVC 574 film page
PVC 996996None; judged on a sample

The gypsum tile under every code is the same Jawdah plain gypsum tile.

Performance

What to match before ordering

Remove one existing tile carefully and record what it shows. Measure the tile and the grid module, and note whether the grid is metric or imperial, since both are listed. Check the thickness, how the edge sits on the flange, and the face code on any label or spare carton.

Then hold a current 574 sample next to the installed ceiling under the building's own lighting. If the installed face has changed with age, decide with the client whether to replace whole rooms rather than scatter new tiles among old ones.

Replacement checklist for PVC 574 tiles
CheckWhy it matters
Tile size and grid module, metric or imperialA tile that is slightly off size will not seat on all four flanges
ThicknessKeeps new tiles level with existing ones
Edge as installedLay-on, lay-in or tegular must match the grid detail
Gypsum type in that roomHumid rooms need MR or FMR, whatever the face
Face against a current 574 sampleAged faces can differ from new film

Applications

Grid and system contents

Where grid members are damaged too, Jawdah supplies the components below; see T-Grid Systems.

System components
ComponentItems
TilesPVC laminated gypsum ceiling tiles, film 574
T-Grid suspension system (T24 / T15)Main Tee, Cross Tee 120, Cross 60, Wall angle
Suspension accessoriesRod Hangers, Adjustment Clips & Anchor Bolts

Installation

Working in an occupied building

Protect furniture and floors below the work area and isolate any services above the tiles being changed. Lift damaged tiles out by hand, check the grid is straight and level, then lay the new tiles. Fix the cause of any leak before replacing stained tiles, rather than covering the problem with a new face. Keep a few spare 574 tiles for future maintenance.

Choosing

When PVC 574 is the right page

Use this page when an existing 574 ceiling has to be repaired or extended. For a new ceiling choosing between faces, see PVC 572; for consultant sample approval, see PVC 996. The full tile range is on Plain Gypsum Ceiling Tiles.

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Jawdah data

Published facts for the 574 tiles

These are the values a replacement 574 tile can be matched against.

  • Film: 574 design, listed with a prefix on the PVC Films code list, no published description
  • Base tile: Jawdah plain gypsum ceiling tile, unperforated, aluminium foil back
  • Thickness: 7.5 | 9.5 | 12.5 | 15 mm
  • Types: RG, MR, FR and FMR
  • Sizes: 600x600 mm and 600x1200 mm (Metric / Imperial)
  • Suspension: exposed T-24 & T-15 grid

Specifications

Tile specification for the PVC 574 version

Tile values are Jawdah plain gypsum data; the face row is the 574 film.

PVC 574 laminated gypsum tile — specification
PropertyValue
Base tilePlain (unperforated) gypsum ceiling tile
FacePVC laminated, film code 574 (prefixed code as listed)
MaterialGypsum tiles complying with ASTM C1396 and EN520; tested as per C473-06a
Thickness7.5 | 9.5 | 12.5 | 15 mm
TypesRG | MR | FR | FMR
EdgeData sheet covers Lay-On, Lay-In and Tegular; edge per thickness confirmed by Jawdah
Sizes600x600 mm and 600x1200 mm (Metric / Imperial)
BackAluminium foil
Weight and core densityVary according to thickness and type
SuspensionT-24 & T-15
Fire (stated for plain gypsum tiles)Class E, BS EN 13501-1:2007

Key facts

  1. PVC 574 laminated gypsum ceiling tiles use the 574 film, listed with a prefix on the Jawdah film code list.
  2. PVC 574 tiles are commonly ordered to replace or extend an existing 574 ceiling.
  3. The PVC 574 tile is made in 7.5, 9.5, 12.5 and 15 mm thicknesses.
  4. PVC 574 tiles are sized 600x600 mm or 600x1200 mm, metric or imperial.
  5. The PVC 574 base tile is offered as RG, MR, FR and FMR types.
  6. PVC 574 tiles rest on exposed T-24 and T-15 grids.

RFQ / BOQ checklist

  • Original film code from records or a removed tile (574)
  • Tile size: 600x600 mm or 600x1200 mm; metric or imperial
  • Thickness: 7.5, 9.5, 12.5 or 15 mm
  • Type per room: RG, MR, FR or FMR
  • Grid: T-24 or T-15 and grid colour
  • Ceiling area per room and tile quantity
  • Fire and humidity requirements from the specification
  • Delivery location and phasing

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Check as-built records, finishes schedules, delivery notes or spare carton labels. If none exist, send a removed tile to Jawdah for identification.

  • Installed faces change with light and cleaning, so compare a current sample with the ceiling on site before ordering. Replacing whole rooms gives the most even result.

  • Size and grid module (600x600 or 600x1200 mm, metric or imperial), thickness (7.5, 9.5, 12.5 or 15 mm) and the edge as installed.

  • Use the type the room needs. Humid rooms call for MR or FMR tiles, even when the face is the same 574 film.

  • Yes. Jawdah supplies Main Tee, Cross Tee 120, Cross 60 and Wall angle for T-24 and T-15 grids, plus Rod Hangers, Adjustment Clips and Anchor Bolts.

  • Yes, it is listed with a prefix on the Jawdah film code list. Copy it exactly from the PVC 574 film page or your records.

  • Keeping a small stock of 574 tiles from the same delivery makes later repairs quicker and keeps the face consistent.

Next step

Match your existing 574 ceiling

Send a removed tile or its label and the grid module. Jawdah will confirm the tile, provide a current 574 sample for comparison and quote replacement tiles and any grid parts.