Gypsum BoardsMR (TDS)
16 mm
Jawdah Moisture Resistant 16 mm is a moisture-resistant (MR) gypsum board, made for humid interiors where a regular board would take up too much water, supplied in 16 mm thickness.
- Type
- Moisture Resistant (MR)
- Thickness
- 16 mm
- Also listed
- 12.5 mm
- Use
- Partitions, ceilings, linings
Overview
Overview
It is one of the two listed thicknesses of Jawdah’s MR board; the other is 12.5 mm. Both belong to the moisture-resistant boards category within Jawdah’s gypsum boards.
Board dimensions, edge profile, weight and the standards the board is tested to are supplied in the data sheet; this page states only what Jawdah’s catalogue lists.
What the board is
Gypsum board is a gypsum core faced on both sides with paper liners, cut and screw-fixed to metal profiles to form partitions, suspended ceilings and wall linings. A moisture-resistant gypsum board is formulated to take up less water than a regular board, for humid rooms such as bathrooms, kitchens and service areas.
Performance
Selection guidance
Standards and compliance
Compliance documentation will be published once verified.
In preparationApplications
Where the moisture-resistant board is used
In drywall systems the board is screw-fixed to metal profiles to build partitions, ceilings and wall linings.
Installation and use
Installation guidance will be available soon.
In preparationTechnical
Closer look
Technical specifications
Listed thickness
This page is the 16 mm board. Jawdah lists the MR board in 16 mm and 12.5 mm; the thickness is chosen with the system design for the partition height, the number of layers and the required rating.
| Property | Value |
|---|---|
| Type | Moisture Resistant (MR) |
| Thickness | 16 mm |
| Also listed | 12.5 mm |
| Use | Partitions, ceilings, linings |
Product comparison
A comparison across the range is being prepared.
In preparationResources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
Related products
FAQ
Questions about this product
16 mm. The same MR board is also listed in 12.5 mm.
Bathrooms, kitchens, laundries, service rooms and other humid interiors in residential, hospitality, healthcare and commercial buildings, as a partition, ceiling or lining board, usually as the substrate behind tiles or a washable finish.
In the technical data sheet supplied by Jawdah on request; this page carries only the catalogue listing (type and thickness).
Both are the same MR board; only the thickness differs. The thickness is chosen with the system design according to partition height, the number of board layers and the required rating, so confirm it with the system details and Jawdah’s data sheet rather than choosing it on its own.
In bathrooms, kitchens, laundries and service rooms the board usually serves as the substrate behind tiles or a washable finish. Confirm the finish build-up with the system details in the data sheet.
The board is screw-fixed to metal profiles to form partitions, ceilings and wall linings. Keep the board, profiles and accessories within one tested system, and confirm the fixing details against the data sheet.
Next step
Planning a project with 16 mm?
Send your drawings or bill of quantities. The Jawdah technical team helps with selection, documentation and quotations.