Jawdah Industrial Co. Ltd.

Stainless Steel Floor Drains · 10x10

Circle Strainer Floor Drain 10x10

The 10x10 Circle Strainer Floor Drain is a stainless steel floor drain with a round strainer cover, and the only size of this drain covered by the datasheet.

Size
10x10
Material
Stainless steel 304/316
Thickness
1.2 mm

Overview

Quick answer

It is a stainless steel floor drain with a circular strainer cover, in the 10x10 size. Jawdah's data sheet for the stainless steel strainer drain covers this size only and gives the material as stainless steel 304/316 with a thickness of 1.2 mm. The 15x15 and 20x20 sizes appear in Jawdah's product list without datasheet values.

Overview

About Circle Strainer Floor Drain 10x10

A round strainer cover is a familiar sight in bathrooms and on balconies: water passes through the perforated disc while larger debris stays on top. The 10x10 Circle Strainer Floor Drain is the smallest of three sizes Jawdah lists for this drain, and it is the one size that has its own datasheet entry, with material and thickness stated.

Jawdah lists the Circle Strainer Floor Drain in 10x10, 15x15 and 20x20. The datasheet for the stainless steel strainer drain lists only the 10x10, so this page is the one in the range with verified technical values.

According to that datasheet, the drain is made of stainless steel 304/316, and its thickness is 1.2 mm. The datasheet does not state the outlet size on this sheet, so the connection to the drainage pipe is confirmed by Jawdah with the quotation, together with the grade supplied for the order.

Compared with its siblings, the 10x10 is both the smallest and the most fully documented. The 15x15 and 20x20 pages offer larger covers, but their material and dimensions are not specified in the datasheet and are confirmed on request.

Pick the 10x10 if a small round strainer suits the floor and you want a size with datasheet values for material and thickness. If a larger cover is needed, the 15x15 and 20x20 are listed but have no datasheet data, so their details come from Jawdah with the quotation. In all cases confirm the outlet pipe size and the finished floor level.

Types

Sizes and variants

Other listed sizes of this product: 15x15 and 20x20.

Applications

Where it is used

Typical locations; suitability is confirmed per project:

  • Typical use: bathroom and toilet floors with a small drain point
  • Balconies and other wet floors that collect rinse or rain water
  • Service areas where a round strainer helps hold back debris

Installation

Installation notes

Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.

  • Confirm the outlet or pipe size it must connect to
  • Check the finished level against the floor or worktop
  • Protect the finish during construction

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Circle Strainer Floor Drain 10x10: recorded data
PropertyValueSource
Size / model (product list)10x10Jawdah product list
MaterialStainless steel 304/316Datasheet
Thickness1.2 mmDatasheet

Key facts

  1. Circle Strainer Floor Drain 10x10 is listed under Sanitary Ware & Drainage Solutions.
  2. Role: a stainless steel floor drain with a round strainer cover.
  3. Recorded for this size: material: Stainless steel 304/316; thickness: 1.2 mm.
  4. Range data: none published.
  5. Values not on this page are confirmed by Jawdah on request.

RFQ / BOQ checklist

  • Product and size or model (10x10)
  • Quantity
  • Outlet or pipe size it connects to
  • Finish required
  • Location and use of the area
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • Jawdah's data sheet gives stainless steel 304/316 for the 10x10 strainer drain. The grade supplied for your order is confirmed with the quotation.

  • The datasheet lists a thickness of 1.2 mm for this size.

  • No. The datasheet lists only the 10x10. The larger sizes appear in Jawdah's product list, and their material and dimensions are confirmed by Jawdah on request.

Next step

Request a quotation for Circle Strainer Floor Drain 10x10

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.