Stainless Steel Floor Drains · 10x10
Slotted Square Floor Drain 10x10
The 10x10 is the smallest size of Jawdah's Slotted Square Floor Drain, a square stainless steel floor drain whose cover has open slots.
- Size
- 10x10
Overview
Quick answer
The Slotted Square Floor Drain 10x10 is a square stainless steel floor drain with a slotted cover, listed by Jawdah in three sizes of which this is the smallest. The supplied datasheet does not specify its material grade, thickness or hole size, so those details are confirmed by Jawdah with the quotation.
Overview
About Slotted Square Floor Drain 10x10
A slotted cover lets water run straight through visible openings in the grate, which suits floors where the drain point should be easy to find and clean. The 10x10 is the smallest of the three sizes Jawdah lists for this drain, before 15x15 and 20x20. It is the size to consider for compact wet areas.
This page covers the Slotted Square Floor Drain in its 10x10 size. Unlike the concealed version, whose cover is hidden, this drain shows a slotted cover on the finished floor.
The datasheet supplied to us does not specify the material grade, thickness or hole size for this product. Rather than estimate them, the page leaves those values to Jawdah, who confirms them for the order. If your specification needs a stainless steel grade or a particular outlet, include it in the enquiry.
Within the range, the 10x10 offers the smallest cover. Because the outlet size is not published for any of the three slotted sizes, choosing between them comes down to the floor area, the tile layout and the outlet on your drawings, confirmed with Jawdah.
Consider the 10x10 for small showers or compact wet floors; the 15x15 and 20x20 give a larger slotted cover. None of the three sizes has published material, thickness or hole size data, so send the outlet pipe size, the finished floor level and any grade requirement with the enquiry and let Jawdah confirm the match.
Applications
Where it is used
Typical locations; suitability is confirmed per project:
- Typical use: small shower areas where a visible drain grate is wanted
- Compact bathroom floors that are cleaned often
- Small service and utility rooms with a single drain point
Installation
Installation notes
Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.
- Confirm the outlet or pipe size it must connect to
- Check the finished level against the floor or worktop
- Protect the finish during construction
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size / model (product list) | 10x10 | Jawdah product list |
| Material, thickness, hole size | Not specified in the supplied datasheet | Datasheet |

Key facts
- Slotted Square Floor Drain 10x10 is listed under Sanitary Ware & Drainage Solutions.
- Role: a square stainless steel floor drain with a slotted cover.
- No datasheet was supplied for this product, so its material, dimensions and outlet details are confirmed by Jawdah with the quotation.
- Range data: none published.
- Values not on this page are confirmed by Jawdah on request.
RFQ / BOQ checklist
- Product and size or model (10x10)
- Quantity
- Outlet or pipe size it connects to
- Finish required
- Location and use of the area
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
The supplied datasheet does not specify the hole size for this drain. Jawdah confirms the outlet with the quotation, so include your pipe size in the enquiry.
The slotted drain shows an open slotted cover on the floor, while the concealed version has a hidden design. Both are square stainless steel floor drains in Jawdah's product list.
Yes. Jawdah lists the Slotted Square Floor Drain in 10x10, 15x15 and 20x20, and the 10x10 is the smallest of these.

Next step
Request a quotation for Slotted Square Floor Drain 10x10
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.

