Manholes · 50x50
Manhole Cover 50 mm 50x50 cm
The Manhole Cover 50 mm 50x50 cm is a square inspection chamber cover from the middle of Jawdah's 50 mm manhole sizes.
- Size
- 50x50
- Size in datasheet
- 50x50 cm
- Material
- Aluminium
Overview
Quick answer
Jawdah's Manhole Cover 50 mm 50x50 cm closes a 50x50 cm inspection chamber opening and belongs to the Manholes 50 mm group. The data sheet shows an aluminium manhole at 50x50 cm within a 30x30 to 80x80 cm range, without saying whether it is the 50 mm or 70 mm item. Material and build are therefore confirmed by Jawdah on request.
Overview
About Manhole Cover 50 mm 50x50 cm
Sitting in the middle of the listed sizes, the 50x50 cm cover is a common reference point when a chamber is neither very small nor very large. Note that the 50 in the group name and the 50x50 in the size are separate labels. Here we cover how this size relates to the rest of the group and what the datasheet records for it.
Within the Manholes 50 mm group, Jawdah lists 30x30, 40x40, 50x50, 60x60, 70x70 and 80x80, plus special sizes on request. The 50x50 cover is the third of these, with two smaller and three larger standard sizes around it.
Jawdah's data sheet has a 50x50 cm entry under its aluminium manhole range. Because the sheet treats the 50 mm and 70 mm items as one, this aluminium entry is range-level information. It is a useful starting point, but the material of this specific cover is confirmed with the quotation rather than assumed from the sheet.
No verified data is published here for the frame, seal, lock, finish or intended traffic. Send the chamber drawing and the use of the area, and Jawdah will confirm these points for the order.
If you are between sizes, check the 40x40 cover for a tighter opening or the 60x60 cover for a wider one. Do not choose by the group label alone: the 50 mm and 70 mm groups both list a 50x50 size, and the datasheet does not distinguish them. Jawdah confirms the right group and material with your quotation.
Applications
Where it is used
Typical locations; suitability is confirmed per project:
- Inspection chambers on internal drainage lines in commercial or residential buildings
- Access covers in service yards and external paved areas, subject to confirming the expected traffic
- Chambers that need room for a hand and rodding tools during routine cleaning
Installation
Installation notes
Installation instructions were not supplied with the product data. Coordinate the outlet, the floor or worktop build-up and the falls before ordering, and follow the documents provided with the order.
- Confirm the outlet or pipe size it must connect to
- Check the finished level against the floor or worktop
- Protect the finish during construction
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size / model (product list) | 50x50 | Jawdah product list |
| Size in datasheet | 50x50 cm | Datasheet |
| Material | Aluminium | Datasheet |
| Datasheet item | Aluminium manhole; 50 mm / 70 mm items not distinguished | Datasheet |

Key facts
- Manhole Cover 50 mm 50x50 cm is listed under Sanitary Ware & Drainage Solutions.
- Role: a manhole (inspection chamber) cover from Jawdah's Manholes 50 mm item.
- Recorded for this size: size in datasheet: 50x50 cm; material: Aluminium.
- Range data: datasheet item: Aluminium manhole; 50 mm / 70 mm items not distinguished.
- Values not on this page are confirmed by Jawdah on request.
RFQ / BOQ checklist
- Product and size or model (50x50)
- Quantity
- Outlet or pipe size it connects to
- Finish required
- Location and use of the area
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
No. They are separate labels in Jawdah's product list: the group is Manholes 50 mm and the size is 50x50 cm. Jawdah confirms what the group label refers to for your order.
30x30 and 40x40 are smaller; 60x60, 70x70 and 80x80 are larger. Special sizes outside these are available on request.
Use it as range data only. The datasheet lists an aluminium manhole at 50x50 cm but does not say which depth item it covers, so Jawdah confirms the material with the quotation.

Next step
Request a quotation for Manhole Cover 50 mm 50x50 cm
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.

