Toilets · Wall Hung
Wall Hung Toilet: Frame, Wall and Drainage Planning
A wall hung toilet is a WC bowl mounted clear of the floor on a concealed support frame inside the wall, with the cistern and drainage hidden behind the finish; Jawdah confirms the model data for this item on request.
01 / Overview
Quick answer
A wall hung toilet is a WC fixed to a concealed frame in the wall so that the bowl does not touch the floor. It keeps the floor clear for cleaning and hides the cistern and pipework, but it needs the frame and wall to be planned before construction. Jawdah confirms the material, dimensions and frame details of its wall hung toilet on request.
Overview
How a wall hung toilet is supported
Wall hung toilets are fixed to a steel carrier frame that is built into the wall before it is closed. The frame takes the load of the bowl and the user, and it usually houses the concealed cistern and the waste connection.
Jawdah lists Wall Hung Toilet in its toilet range. Material, dimensions, frame compatibility and design for this item are confirmed by the Jawdah team per project, as they are not yet published. This page sets out the planning decisions that a wall hung toilet requires.
The bowl of a wall hung toilet is bolted through the finished wall to threaded rods on a carrier frame. The frame is anchored to the floor slab and, depending on the type, also to the structural wall, so that the load is carried down to the structure rather than by the wall lining alone.
Inside the frame sit the concealed cistern, the flush mechanism and the waste bend. Only the bowl and a flush plate remain visible.
02 / Performance
Planning decisions before construction
Fix the frame type and bowl height before the walls are built, together with the waste position and the water supply point. Confirm the wall depth needed for the frame and the cistern, and check that the slab can take the frame anchors.
Agree the flush plate position, any grab rails in accessible cubicles, and the sequence between plumber, drywall installer and tiler. Send these decisions to Jawdah so the bowl can be matched to the frame.
Maintenance
Maintenance considerations
Cleaning is easier because there is no base on the floor, but the concealed cistern must be inspected periodically through its access opening. Check the bowl fixings and seals during routine maintenance in heavily used washrooms.
03 / Applications
Where wall hung toilets are chosen
Wall hung toilets are favoured where floor hygiene is critical, such as hospitals, clinics, food factories and high-traffic public washrooms, because the floor under the bowl can be mopped or machine-cleaned without obstruction.
They are also used in offices, hotels and airports where a clean architectural line is wanted, and where the bowl height must be set precisely, for example in accessible cubicles.
Compatibility
Walls, frames and access
The frame can be built into a masonry wall or into a stud partition. In dry construction, the frame is fixed between the studs of a partition solution and lined with suitable boards; moisture-resistant boards are normally used in wet areas.
The concealed cistern must remain serviceable. Access is usually through the flush-plate opening, and some designs add a separate service hatch, for which a partition access door can be specified.
Installation
Installation sequence
Install and level the frame, connect water and waste, and pressure-test before closing the wall. After boarding and tiling, fit the bowl to the frame studs with the isolating gaskets supplied by the frame maker, connect the flush pipe and outlet, then tighten evenly and test.
Do not over-tighten the fixings; follow the torque or method given by the frame and bowl manufacturer.
04 / Technical
Closer look
Jawdah data
Status of Jawdah data for this item
Item-specific data for the Jawdah wall hung toilet has not been published yet. In the toilet range, the squat toilet and the western WC carry published statements and are made from deep-drawing 304 stainless steel; the material and design of the wall hung item are confirmed by Jawdah when you enquire.
| Item | Status |
|---|---|
| Material and grade | Confirmed by Jawdah on request |
| Bowl dimensions and projection | Confirmed by Jawdah on request |
| Fixing centres and frame compatibility | Confirmed by Jawdah on request |
| Outlet size | Confirmed by Jawdah on request |
| Documents | Confirmed by Jawdah on request |
Comparison
Wall hung or floor mounted
Choose wall hung for floor hygiene, adjustable height and a concealed cistern. Choose a floor mounted toilet where walls cannot take a frame or simple replacement matters. The Toilets category compares the full range.
Key facts
- A wall hung toilet is a WC fixed to a concealed frame inside the wall.
- Wall hung toilets keep the floor under the bowl clear for cleaning.
- The carrier frame of a wall hung toilet usually houses the concealed cistern and waste connection.
- Jawdah lists Wall Hung Toilet in its toilet range.
- Item-specific data for the Jawdah wall hung toilet is confirmed by Jawdah on request.
RFQ / BOQ checklist
- Number of wall hung toilets
- Wall type: masonry or stud partition, and depth
- Frame type and bowl fixing centres, if fixed
- Required bowl height
- Flushing method and flush plate position
- Accessibility requirements
- Washroom drawings and delivery location
05 / Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
System relationships for this product are being prepared.
Our technical team can share the current information on request.Ask the technical team
06 / FAQ
Frequently asked questions
A WC bowl fixed to a concealed carrier frame in the wall, so the bowl sits clear of the floor and the cistern is hidden.
Not yet. Material, dimensions, fixing centres and documents for this item are confirmed by the Jawdah team on request.
Yes, when a suitable carrier frame is fixed within the partition and anchored to the slab, with moisture-resistant boards in the wet area.
Usually through the flush-plate opening; a separate access hatch can be added where the design requires it.
The floor beneath stays clear for cleaning, the bowl height can be set precisely and the cistern is hidden.
Quantity, wall type and depth, frame type if already chosen, bowl height, flushing method and washroom drawings.
Next step
Request wall hung toilet data
Share the wall type, frame details, bowl height and quantities. Jawdah will then confirm which model, material, dimensions and documents apply.