Access Panels · 40x40 cm
Aluminium Strip Ceiling Access Panel, Automatic Lock – 40x40 cm
This is the 40x40 cm size of Jawdah's aluminium strip ceiling access panel with automatic lock, one step up from the 30x30 opening.
- Size
- 40x40 cm
- Lock
- Automatic Lock
- Frame
- AA6063 aluminium, 1.2 mm

Overview
Quick answer
The 40x40 automatic-lock panel is an aluminium-framed ceiling hatch for strip ceilings. Jawdah's data sheet lists 40x40 as a standard size. Its frame is AA6063 aluminium alloy, 1.2 mm thick, finished with mill finish powder coating or white electrostatic powder coating, and the door opens on a concealed touch latch.
Overview
About Aluminium Strip Ceiling Access Panel, Automatic Lock – 40x40 cm
A 40x40 cm opening leaves room for a hand and a tool together, which is often the difference between inspecting a valve and actually servicing it. This automatic-lock size sits second in Jawdah's list for aluminium strip ceilings, between 30x30 and 50x50. The touch latch is hidden, so the panel reads as part of the ceiling until someone presses it.
The panel combines a 40x40 cm frame with the automatic lock. According to the datasheet, a concealed touch latch is fitted as standard on every door in the range. The door panel lifts out for work and hangs from a safety cable rather than dropping to the floor.
Construction data comes from Jawdah's access panel datasheet: an AA6063 aluminium alloy frame with references to BS EN 573-3, BS EN 775-2 and BS EN 775-9, and a thickness of 1.2 mm. Two finishes are listed, mill finish powder coating and white electrostatic powder coating, so the frame colour is chosen at order stage. The datasheet counts 40x40 as a standard size.
What sets this page apart from the 30x30 is reach: the larger frame suits work that needs a tool through the opening. The datasheet does not rate the panel for fire or sound, so any requirement of that kind is confirmed with the quotation.
Compare 40x40 first with the 30x30, which suits a single small item, and with the 50x50, which gives more room for parts that must come out through the ceiling. All three are datasheet standard sizes, as is 60x60. The 120x60 rectangle is a custom size on request. Confirm the frame finish, the strip module and the position of the services before ordering.


Applications
Where it is used
The datasheet lists a wide range of application areas for access panels, including:
- Typical use: service access to valves and small fittings above hall and lobby ceilings
- Ceiling openings over cable routes in computer rooms and utility rooms
- Hospital corridors where maintenance staff need tool access through the ceiling
- Retail ceilings in shops where a discreet hatch is preferred over removing strips
Installation
Installation notes
Set out the opening for the 40x40 cm panel in the aluminium framing and keep the services behind it within reach. Fixing details are not given in the supplied datasheet; follow the instructions supplied with the order.
- Keep the safety cable attached when the door is removed
- Do not paint over the latch or the door gap
Technical
Closer look


Specifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size | 40x40 cm | Jawdah product list |
| Lock | Automatic Lock | Jawdah product list |
| Standard size in datasheet | Yes | Datasheet |
| Frame material | Aluminium Alloy AA6063 (BS EN 573-3, BS EN 775-2, BS EN 775-9) | Datasheet |
| Thickness | 1.2 mm | Datasheet |
| Frame finish | Mill finish powder coating; electrostatic powder coating, white | Datasheet |
| Latch | Concealed touch latch, standard on all doors | Datasheet |
| Door panel | Removable, with safety cable | Datasheet |
| Fire or acoustic rating of the panel | Not specified in the supplied datasheet | Datasheet |

Key facts
- Aluminium Strip Ceiling Access Panel, Automatic Lock, 40x40 cm is listed under Jawdah Access Panels.
- Use: access to services through aluminium strip ceilings.
- Frame: aluminium alloy AA6063, 1.2 mm, white powder coating.
- Standard datasheet size.
- Other sizes listed: 30x30, 50x50, 60x60, 120x60 cm.
RFQ / BOQ checklist
- Panel type, lock and size (40x40 cm)
- Ceiling or wall type and board
- Quantity per size
- Frame finish required
- Location (wet area, corridor, plant room)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
Jawdah's data sheet lists mill finish powder coating and white electrostatic powder coating for the frame. State the finish you need in the enquiry so it is confirmed with the quotation.
The 40x40 is the second-smallest of the five sizes in Jawdah's product list. It is larger than the 30x30 and smaller than the 50x50; all three are standard sizes in the datasheet.
Yes. The datasheet describes the door panel as removable, held by a safety cable, so it can be detached for work and stays attached to the frame.

Next step
Request a quotation for the 40x40 cm aluminium strip ceiling access panel
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
