Jawdah Industrial Co. Ltd.

Access Panels · 50x50 cm

Aluminium Strip Ceiling Access Panel, Automatic Lock – 50x50 cm

The 50x50 cm panel is the middle size in Jawdah's automatic-lock range for aluminium strip ceilings, larger than 40x40 and smaller than 60x60.

Size
50x50 cm
Lock
Automatic Lock
Frame
AA6063 aluminium, 1.2 mm
Aluminium strip ceiling access panel, automatic lock, closed, strip face

Overview

Quick answer

This is an access panel for aluminium strip ceilings in the 50x50 cm size, with an automatic lock. Jawdah's data sheet treats 50x50 as a standard size and lists an AA6063 aluminium alloy frame 1.2 mm thick, a concealed touch latch, a removable door panel with a safety cable, and powder-coated finishes.

Overview

About Aluminium Strip Ceiling Access Panel, Automatic Lock – 50x50 cm

Half a metre each way gives enough room for a person to put head and shoulders into the void to look along a duct or a pipe run. In Jawdah's list of five automatic-lock sizes for aluminium strip ceilings, the 50x50 cm panel is the middle one, with 30x30 and 40x40 below it and 60x60 and 120x60 above.

Here the 50x50 cm frame is supplied with the automatic lock. The datasheet's latch is a concealed touch type and is standard on all doors, so the lock does not show on the ceiling face.

Frame material is AA6063 aluminium alloy; the datasheet cites BS EN 573-3, BS EN 775-2 and BS EN 775-9 for it and gives the thickness as 1.2 mm. Finishes are mill finish powder coating or white electrostatic powder coating. With a door this size, the safety cable matters: the door panel is removable, and the cable keeps it attached to the frame while it is out.

Because 50x50 is a datasheet standard size, its construction follows the data above without special order. What the datasheet does not cover is a fire or acoustic rating for the panel; if one is needed, it is confirmed with the quotation.

Choose 50x50 when 40x40 feels tight for the work but a 60x60 opening would clash with the ceiling layout or the services above. The four square sizes, 30x30 to 60x60, are datasheet standard sizes; 120x60 is a custom size on request. Send the strip module, the ceiling void depth and what must pass through the opening.

Aluminium strip ceiling access panel, automatic lock, open, strip face and hinged frame

Types

Sizes and variants

This page is the 50x50 cm panel. The other sizes of this product are 30x30 cm, 40x40 cm, 60x60 cm and 120x60 cm.

Aluminium strip ceiling access panel, automatic lock, open, showing the strip carriers on the door back

Applications

Where it is used

The datasheet lists a wide range of application areas for access panels, including:

  • Typical use: inspecting duct and pipe runs above hall ceilings where the technician needs to look along the void
  • Access to cable trays and junctions over computer rooms and utility rooms
  • Hospital ceilings above corridors where medium-sized components may need removal
  • Shop ceilings concealing services that are reached a few times a year

Installation

Installation notes

Set out the opening for the 50x50 cm panel in the aluminium framing and keep the services behind it within reach. Fixing details are not given in the supplied datasheet; follow the instructions supplied with the order.

  • Keep the safety cable attached when the door is removed
  • Do not paint over the latch or the door gap

Technical

Closer look

Approved photography of the product and its finish.
Aluminium strip ceiling access panel, automatic lock, back view with strip carriers
Aluminium strip ceiling access panel, automatic lock, open, door back and hinged frame

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Aluminium Strip Ceiling Access Panel, Automatic Lock – 50x50 cm: recorded data
PropertyValueSource
Size50x50 cmJawdah product list
LockAutomatic LockJawdah product list
Standard size in datasheetYesDatasheet
Frame materialAluminium Alloy AA6063 (BS EN 573-3, BS EN 775-2, BS EN 775-9)Datasheet
Thickness1.2 mmDatasheet
Frame finishMill finish powder coating; electrostatic powder coating, whiteDatasheet
LatchConcealed touch latch, standard on all doorsDatasheet
Door panelRemovable, with safety cableDatasheet
Fire or acoustic rating of the panelNot specified in the supplied datasheetDatasheet

Key facts

  1. Aluminium Strip Ceiling Access Panel, Automatic Lock, 50x50 cm is listed under Jawdah Access Panels.
  2. Use: access to services through aluminium strip ceilings.
  3. Frame: aluminium alloy AA6063, 1.2 mm, white powder coating.
  4. Standard datasheet size.
  5. Other sizes listed: 30x30, 40x40, 60x60, 120x60 cm.

RFQ / BOQ checklist

  • Panel type, lock and size (50x50 cm)
  • Ceiling or wall type and board
  • Quantity per size
  • Frame finish required
  • Location (wet area, corridor, plant room)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • It is the middle of the five sizes in Jawdah's product list: smaller than 60x60 and 120x60, larger than 30x30 and 40x40. The datasheet lists 50x50 as a standard size.

  • The datasheet describes the door panel as removable and held by a safety cable, so the door stays attached to the frame when it is taken out for work.

  • Aluminium alloy AA6063, with BS EN 573-3, BS EN 775-2 and BS EN 775-9 cited in Jawdah's data sheet, and a thickness of 1.2 mm.

Next step

Request a quotation for the 50x50 cm aluminium strip ceiling access panel

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.