Drywall Accessories · Self Drilling Screw
Self Drilling Screw for Drywall Metal Framing
The Self Drilling Screw drills its own hole and is used for metal-to-metal fixing in the framing of Jawdah drywall partitions, linings and ceilings.
Overview
Quick answer
Jawdah's Self Drilling Screw joins metal profiles to each other in drywall framing without pre-drilling, since it drills its own hole. The accessories schedule records 'metal fixation screws' as galvanised steel in lengths from 13 mm to 38 mm. Jawdah confirms that this item is that screw, and its exact lengths, with the quotation.
Overview
About Self Drilling Screw for Drywall Metal Framing
Framing a partition or ceiling means joining steel to steel: studs to tracks, channels to channels. The Self Drilling Screw is the part Jawdah lists for that work, because it cuts its own hole as it goes in. Its recorded data comes from an entry for metal fixation screws, so the material and lengths should be confirmed for this exact item.
The Self Drilling Screw is a screw that drills its own hole, used for metal-to-metal fixing in the framing. That separates it from the Drywall Screw, which passes through a gypsum board into the profile.
Jawdah's accessories schedule does not use the name Self Drilling Screw. It lists 'metal fixation screws' in galvanised steel with lengths from 13 mm to 38 mm. Jawdah confirms that this item is the same screw and confirms its exact lengths, so treat both values as provisional until the quotation.
No head type, drilling capacity, steel thickness limit or spacing is recorded. Base those choices on the profiles you are joining and on the system design, and ask Jawdah to check the screw against the profiles in your order.
Use the Self Drilling Screw where one metal profile is fixed to another, and the Drywall Screw where a board is fixed to a profile. Because the 13 mm to 38 mm range comes from the metal fixation screw entry, confirm with Jawdah the lengths available for this item before you finalise quantities.
Types
Sizes and variants
The other fixing and mounting accessories in the Jawdah list are Omega Clip, U-Clip BD2, Thread Rod, Nut, Anchor, Drywall Screw, Drywall Joint Tape and Ready Mixed Joint Compound.
Applications
Where it is used
Used in Jawdah drywall systems:
- Joining studs to tracks in drywall partition framing
- Fixing channels and angles together in suspended ceiling grids
- Metal-to-metal connections in wall lining frames, as is typical practice
Installation
Compatibility notes
Use accessories with the profiles and boards of the same system, and confirm sizes against the profiles ordered. Wear eye protection when cutting metal parts.
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Material | Galvanised steel (metal fixation screws, accessories schedule) | Jawdah product data |
| Lengths | 13 mm to 38 mm (metal fixation screws; confirm for this item) | Jawdah product data |

Key facts
- Self Drilling Screw is listed under Jawdah Drywall Solutions, Accessories, Fixing and Mounting Accessories.
- Role: a screw that drills its own hole, used for metal-to-metal fixing in the framing.
- Recorded data: material: Galvanised steel (metal fixation screws, accessories schedule); lengths: 13 mm to 38 mm (metal fixation screws; confirm for this item).
- Used with Jawdah ceiling and partition profiles and gypsum boards.
- Load capacity and spacing: not specified for this item.
RFQ / BOQ checklist
- Item: Self Drilling Screw
- Quantity (pieces, boxes or rolls)
- Profiles and boards it will be used with
- Ceiling, partition or lining system
- Documents your specification requires
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
It is used for metal-to-metal fixing in drywall framing. It drills its own hole, so it does not need a pre-drilled hole in the profile.
The accessories schedule lists metal fixation screws from 13 mm to 38 mm. Jawdah confirms the exact lengths for this item.
The schedule uses the name metal fixation screws. Jawdah confirms that this item is the same screw when it issues the quotation.

Next step
Request a quotation for Self Drilling Screw
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
