Drywall Accessories · Thread Rod
Thread Rod Ø6 mm x 3000 mm for Ceiling Suspension
The Thread Rod is a fully threaded galvanised steel rod, 6 mm in diameter and 3000 mm long, used to suspend drywall ceilings from the structure.
- Material
- Galvanised steel
- Diameter
- 6 mm
- Length
- 3000 mm
- Thread
- Fully threaded
Overview
Quick answer
Jawdah's Thread Rod is the hanger of a suspended ceiling: a galvanised steel rod, threaded along its full length, with one end fixed to the structure. The threaded rod datasheet gives a 6 mm diameter and 3000 mm length, and states that rods are supplied in packs and sub-packs. No load or spacing figure is given.
Overview
About Thread Rod Ø6 mm x 3000 mm for Ceiling Suspension
Of all the fixing accessories Jawdah lists, the Thread Rod has the fullest data. Its own datasheet gives the material, a 6 mm diameter, a 3000 mm length, full-length threading and how it is packed. In the ceiling it is the vertical hanger: one end is fixed to the structure, and the ceiling grid hangs from the other.
The Thread Rod is a fully threaded rod for ceiling suspension, with one end fixed to the structure. Because the thread runs its whole length, nuts can be set at the height the ceiling needs.
The threaded rod datasheet records galvanised steel, a diameter of 6 mm and a length of 3000 mm, packed in packs and sub-packs. The 6 mm diameter matches the Nut and Anchor in the same accessory group, which the schedule also lists at Ø6 mm.
The datasheet adds two handling notes: metal products should be stored in a suitable environment, and non-fogging goggles should be worn when cutting metal. It gives no load or spacing figure, so hanger spacing must come from the ceiling system design.
Use the Thread Rod as the hanger between the structure and the ceiling grid, together with the Ø6 mm Anchor at the top and the Ø6 mm Nut for setting the level. Rods come in 3000 mm lengths, so plan cut lengths from the ceiling drop. Confirm quantities and pack sizes with Jawdah.
Types
Sizes and variants
The other fixing and mounting accessories in the Jawdah list are Omega Clip, U-Clip BD2, Nut, Anchor, Drywall Screw, Self Drilling Screw, Drywall Joint Tape and Ready Mixed Joint Compound.
Applications
Where it is used
Used in Jawdah drywall systems:
- Hangers for suspended gypsum board ceilings, fixed to the slab with an anchor
- Suspension of drywall ceiling bulkheads at a lower level than the main ceiling
- Ceiling drops cut to length on site from 3000 mm rods, as is typical practice
Installation
Compatibility notes
Use accessories with the profiles and boards of the same system, and confirm sizes against the profiles ordered. Wear eye protection when cutting metal parts.
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Material | Galvanised steel | Datasheet |
| Diameter | 6 mm | Datasheet |
| Length | 3000 mm | Datasheet |
| Thread | Fully threaded | Datasheet |
| Packing | Packs and sub-packs | Datasheet |

Key facts
- Thread Rod is listed under Jawdah Drywall Solutions, Accessories, Fixing and Mounting Accessories.
- Role: a fully threaded rod for ceiling suspension, with one end fixed to the structure.
- Recorded data: material: Galvanised steel; diameter: 6 mm; length: 3000 mm; thread: Fully threaded; packing: Packs and sub-packs.
- Used with Jawdah ceiling and partition profiles and gypsum boards.
- Load capacity and spacing: not specified for this item.
RFQ / BOQ checklist
- Item: Thread Rod
- Quantity (pieces, boxes or rolls)
- Profiles and boards it will be used with
- Ceiling, partition or lining system
- Documents your specification requires
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
The threaded rod datasheet gives a 6 mm diameter and a 3000 mm length, in galvanised steel and fully threaded.
The datasheet states that rods are supplied in packs and sub-packs. Confirm the pack quantity with Jawdah when ordering.
Jawdah's accessories schedule lists both the Nut and the Anchor at Ø6 mm in galvanised steel, matching the rod diameter.

Next step
Request a quotation for Thread Rod
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
