Jawdah Industrial Co. Ltd.

C-Channel · 12

C-Channel 12 – Ceiling Metal Profile

C-Channel 12 is Jawdah's main ceiling carrying channel with a 12x38x12 mm section, the larger of its two listed C-channel sizes.

Size
12
Section
12x38x12 mm
Material
Galvanised steel
Length
3000 mm

Overview

Quick answer

C-Channel 12 is a hot-dip galvanised steel carrying channel for suspended gypsum ceilings. Jawdah's drywall suspension datasheet lists its section as 12x38x12 mm, making it the C-channel size with published dimensions. It hangs from the slab, carries the furring channels, comes in 3000 mm lengths and uses steel from 0.35 up to 0.9 mm.

Overview

About C-Channel 12 – Ceiling Metal Profile

Of the two C-channel sizes on Jawdah's product list, size 12 is the one the datasheet describes: a 12x38x12 mm section in hot-dip galvanised steel. That makes it the easier choice when a consultant asks for published profile dimensions. In the ceiling it is the main carrying member, hung from the slab, with the furring channels fixed beneath it.

A 12x38x12 mm section, as listed in the datasheet, defines this profile, and it corresponds to the 12 size on this page. The sibling size 9 has no datasheet section, so the two should not be treated as interchangeable without checking.

In use, the channel forms the top layer of a suspended gypsum ceiling. Hangers from the slab hold it, and the board-carrying furring channels are attached below. Jawdah makes it from hot-dip galvanised steel complying with ASTM A653M, 0.35 up to 0.9 mm thick, and other thicknesses can be requested.

Standard length is 3000 mm. The datasheet's raw-material data covers fire to BS 476 Part 6 – 1989, a Class 1 surface flame spread to BS 476 Part 7 – 1997, and humidity to EN ISO 6270-2; these describe the steel, not a ceiling assembly.

Pick size 12 when you need a C-channel with a published section, 12x38x12 mm, for drawings or submittals. Size 9 is the smaller listed alternative, but its section must be confirmed by Jawdah. In either case, confirm the steel thickness you need within the 0.35 to 0.9 mm range.

Types

Sizes and variants

This page is the 12 size.

Other c-channel sizes: C-Channel 9.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard. The c-channel is used in:

  • Main carrying layer of suspended gypsum ceilings where a 12x38x12 mm channel is specified
  • Drywall ceiling bulkheads and level changes hung from the slab
  • Ceiling grids supporting furring channels and Jawdah gypsum boards

Installation

Installation notes

The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:

  • Store profiles flat and dry, away from site water
  • Wear eye protection when cutting metal
  • Use profiles and accessories from the same system

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

C-Channel 12 – Ceiling Metal Profile: recorded data
PropertyValueSource
Size (product list)12Jawdah product list
Section (datasheet)12x38x12 mmDatasheet
Steel thickness0.35 up to 0.9 mm; other thicknesses on requestDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. C-Channel 12 is listed under Jawdah Drywall Solutions, Ceiling Metal Profiles.
  2. Role: the main carrying member of a suspended gypsum ceiling, hung from the slab.
  3. Datasheet section for this size: 12x38x12 mm.
  4. Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
  5. Other sizes listed: 9.

RFQ / BOQ checklist

  • Profile and size (C-Channel 12)
  • Steel thickness
  • Length and quantity
  • Board type and layers the system carries
  • Accessories needed (clips, rods, anchors, screws)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • The drywall suspension datasheet lists a 12x38x12 mm C-channel section, which corresponds to size 12.

  • Size 12 is the one with a datasheet section, which helps when published dimensions are needed. Size 9 is smaller on Jawdah's product list and its section is confirmed on request.

  • No. The BS 476 entries in the datasheet are given for the raw material. They are not a classification of a ceiling built with C-Channel 12.

Next step

Request a quotation for C-Channel 12

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.