Jawdah Industrial Co. Ltd.

C-Channel · 9

C-Channel 9 – Ceiling Metal Profile

C-Channel 9 is the smaller of Jawdah's two C-channel sizes, a galvanised main carrying member hung from the slab in a suspended gypsum ceiling.

Size
9
Material
Galvanised steel
Length
3000 mm

Overview

Quick answer

C-Channel 9 from Jawdah is a hot-dip galvanised steel profile that forms the main carrying layer of a suspended gypsum ceiling, hung from the slab with furring channels below it. It is the smaller of the two listed sizes, 9 and 12. The datasheet does not give a section for size 9, so Jawdah confirms its dimensions on request.

Overview

About C-Channel 9 – Ceiling Metal Profile

Jawdah lists two main carrying channels for gypsum ceilings, and size 9 is the smaller. It hangs from the slab and supports the furring channels that take the boards. What sets this page apart from size 12 is the data: the datasheet's only C-channel section, 12x38x12 mm, belongs to size 12, so the section of size 9 must be confirmed.

As a C-channel, size 9 is the primary member of the ceiling grid, suspended from the structure and carrying the furring channel layer. It is formed from hot-dip galvanised steel complying with ASTM A653M, with steel from 0.35 up to 0.9 mm and other thicknesses on request, and is supplied in 3000 mm standard lengths.

The supplied datasheet lists C-channel sections of 12x38x12 mm and names none of them as size 9. Its section dimensions are therefore not specified, and Jawdah confirms them with the quotation. Do not assume size 9 is a scaled version of size 12.

The raw-material entries are those of the whole profile family: BS 476 Part 6 – 1989 for fire, Class 1 surface flame spread to BS 476 Part 7 – 1997, and EN ISO 6270-2 for humidity.

Size 9 and size 12 do the same job, so the ceiling design decides between them. If you need a published section for submittals, size 12 is the one the datasheet covers; size 9 needs a confirmation from Jawdah. Ask for its section and steel thickness with the quotation, together with matching clips and furring channels.

Types

Sizes and variants

This page is the 9 size.

Other c-channel sizes: C-Channel 12.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard. The c-channel is used in:

  • Main carrying runs of suspended gypsum board ceilings where size 9 is specified
  • Framing for ceiling bulkheads and level changes in drywall
  • Ceilings finished with Jawdah gypsum boards on a furring channel layer

Installation

Installation notes

The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:

  • Store profiles flat and dry, away from site water
  • Wear eye protection when cutting metal
  • Use profiles and accessories from the same system

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

C-Channel 9 – Ceiling Metal Profile: recorded data
PropertyValueSource
Size (product list)9Jawdah product list
Section (datasheet)Not specified in the supplied datasheetDatasheet
Steel thickness0.35 up to 0.9 mm; other thicknesses on requestDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. C-Channel 9 is listed under Jawdah Drywall Solutions, Ceiling Metal Profiles.
  2. Role: the main carrying member of a suspended gypsum ceiling, hung from the slab.
  3. Section for this size: not specified in the supplied datasheet.
  4. Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
  5. Other sizes listed: 12.

RFQ / BOQ checklist

  • Profile and size (C-Channel 9)
  • Steel thickness
  • Length and quantity
  • Board type and layers the system carries
  • Accessories needed (clips, rods, anchors, screws)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • No. The only C-channel section it lists, 12x38x12 mm, matches size 12. The section of size 9 is confirmed by Jawdah on request.

  • Yes. Jawdah's product list gives C-channel sizes 9 and 12, and 9 is the smaller. Both share the material, steel range and 3000 mm standard length.

  • It is the main carrying member hung from the slab. The furring channels that the gypsum boards are screwed to are fixed below it.

Next step

Request a quotation for C-Channel 9

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.