Jawdah Industrial Co. Ltd.

Furring Channel · 35

Furring Channel 35 – Ceiling Metal Profile

Furring Channel 35 is the smaller of the two Omega furring channel sizes in Jawdah's product list, used to carry the gypsum boards of a suspended ceiling.

Size
35
Material
Galvanised steel
Length
3000 mm

Overview

Quick answer

Furring Channel 35 is a hot-dip galvanised steel Omega profile from Jawdah that the boards of a suspended gypsum ceiling are screwed to. It is the smaller of the two listed sizes, 35 and 38. Steel thickness is 0.35 up to 0.9 mm, standard length 3000 mm, and its exact section is confirmed by Jawdah because the datasheet does not name a section for size 35.

Overview

About Furring Channel 35 – Ceiling Metal Profile

Size 35 is the lower of Jawdah's two furring channel sizes; the other is 38. It does the same job in the ceiling, providing the face the gypsum boards are screwed to, but buyers should note one gap: the datasheet does not identify a section for size 35. That makes confirming its dimensions with Jawdah the first step before ordering.

This page is for Furring Channel 35, the Omega profile that sits below the main carrying members and receives the boards. Jawdah forms it from hot-dip galvanised steel complying with ASTM A653M, 0.35 up to 0.9 mm thick, with other thicknesses on request, in a standard 3000 mm length.

The supplied datasheet shows a furring channel section of 21x34x21 mm, but it does not say whether that section is size 35, size 38 or neither. Rather than assume, treat the section of size 35 as not specified and have Jawdah confirm it on request.

Raw-material data applies to the whole profile family: BS 476 Part 6 – 1989 for fire, Class 1 surface flame spread to BS 476 Part 7 – 1997, and humidity according to EN ISO 6270-2. No figure in the datasheet is specific to size 35.

Choose between 35 and 38 from the ceiling design or the profile size your contractor already uses. Neither size has a named section in the datasheet, so the 21x34x21 mm figure should not be taken as size 35. Ask Jawdah to confirm the section and steel thickness of size 35, and compare them with size 38 before you order.

Types

Sizes and variants

This page is the 35 size.

Other furring channel sizes: Furring Channel 38.

Applications

Where it is used

The datasheet lists the profiles for the installation of gypsum plasterboard. The furring channel is used in:

  • Suspended gypsum board ceilings designed around a 35 furring channel
  • Ceiling bulkheads and level changes framed in drywall
  • Ceilings finished with Jawdah gypsum boards screwed to the furring layer

Installation

Installation notes

The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:

  • Store profiles flat and dry, away from site water
  • Wear eye protection when cutting metal
  • Use profiles and accessories from the same system

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Technical data

Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.

Furring Channel 35 – Ceiling Metal Profile: recorded data
PropertyValueSource
Size (product list)35Jawdah product list
Section (datasheet)Not specified in the supplied datasheetDatasheet
Steel thickness0.35 up to 0.9 mm; other thicknesses on requestDatasheet
MaterialHot-dip galvanised steel complying with ASTM A653MDatasheet
Standard length3000 mmDatasheet
Fire (raw material)BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997Datasheet
Humidity (raw material)According to EN ISO 6270-2Datasheet

Key facts

  1. Furring Channel 35 is listed under Jawdah Drywall Solutions, Ceiling Metal Profiles.
  2. Role: the secondary ceiling member to which the gypsum boards are screwed.
  3. Section for this size: not specified in the supplied datasheet.
  4. Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
  5. Other sizes listed: 38.

RFQ / BOQ checklist

  • Profile and size (Furring Channel 35)
  • Steel thickness
  • Length and quantity
  • Board type and layers the system carries
  • Accessories needed (clips, rods, anchors, screws)
  • Project location and delivery date

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • The datasheet does not say so. It lists a 21x34x21 mm furring channel section without naming the size, so Jawdah confirms the section of size 35 on request.

  • They are the two furring channel sizes on Jawdah's product list, and 35 is the smaller. Both share the material, steel range and 3000 mm length; their sections are confirmed by Jawdah.

  • The standard length given in the datasheet is 3000 mm, the same as the other ceiling profiles.

Next step

Request a quotation for Furring Channel 35

Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.