Furring Channel · 38
Furring Channel 38 – Ceiling Metal Profile
Furring Channel 38 is the larger of Jawdah's two listed Omega sizes, the galvanised profile that gypsum ceiling boards are fixed to.
- Size
- 38
- Material
- Galvanised steel
- Length
- 3000 mm
Overview
Quick answer
Jawdah's Furring Channel 38 is an Omega-type ceiling profile in hot-dip galvanised steel, used as the board-carrying layer of a suspended gypsum ceiling. Of the two listed sizes, 35 and 38, it is the larger. It comes in 3000 mm lengths and steel from 0.35 up to 0.9 mm; its section dimensions are confirmed by Jawdah on request.
Overview
About Furring Channel 38 – Ceiling Metal Profile
Buyers who specify 38 rather than 35 are choosing the larger of the two Omega sizes Jawdah lists. The profile is formed from galvanised steel and supplied in 3000 mm lengths for the ceiling's board layer. As with size 35, the datasheet stops short of a named section for 38, so ask Jawdah for its dimensions when you request a quote.
Furring Channel 38 is the secondary ceiling member to which the gypsum boards are screwed, hung beneath the C-channels that carry the ceiling from the slab. Its material is hot-dip galvanised steel complying with ASTM A653M, offered from 0.35 up to 0.9 mm with other thicknesses on request.
What the datasheet does not settle is the section. It shows one furring channel section, 21x34x21 mm, and assigns it to no size, so the dimensions of size 38 are not specified there. Jawdah confirms them on request instead of borrowing a figure from size 35.
The rest of the record is shared with the profile family: a 3000 mm standard length, raw-material fire data to BS 476 Part 6 – 1989, a Class 1 surface flame spread to BS 476 Part 7 – 1997, and humidity to EN ISO 6270-2.
If your drawings or clips are set up for size 38, order this page's profile; if they follow size 35, use the sibling page. Because the datasheet names no section for either, the decision cannot rest on a published dimension. Confirm the size 38 section, steel thickness and quantity with Jawdah alongside the C-channels and clips.
Types
Sizes and variants
This page is the 38 size.
Other furring channel sizes: Furring Channel 35.
Applications
Where it is used
The datasheet lists the profiles for the installation of gypsum plasterboard. The furring channel is used in:
- Board layer of suspended gypsum ceilings specified with a 38 furring channel
- Drywall-framed bulkheads and steps in the ceiling level
- Ceilings built with Jawdah gypsum boards fixed to Omega profiles
Installation
Installation notes
The supplied datasheet does not give spans, spacings or partition heights for this size. These are set by the system design and confirmed with Jawdah. General handling notes:
- Store profiles flat and dry, away from site water
- Wear eye protection when cutting metal
- Use profiles and accessories from the same system
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Technical data
Values below are stated only where the supplied datasheet or Jawdah's verified product data names this item. Anything else is confirmed with the quotation.
| Property | Value | Source |
|---|---|---|
| Size (product list) | 38 | Jawdah product list |
| Section (datasheet) | Not specified in the supplied datasheet | Datasheet |
| Steel thickness | 0.35 up to 0.9 mm; other thicknesses on request | Datasheet |
| Material | Hot-dip galvanised steel complying with ASTM A653M | Datasheet |
| Standard length | 3000 mm | Datasheet |
| Fire (raw material) | BS 476 Part 6 – 1989; surface flame spread Class 1, BS 476 Part 7 – 1997 | Datasheet |
| Humidity (raw material) | According to EN ISO 6270-2 | Datasheet |

Key facts
- Furring Channel 38 is listed under Jawdah Drywall Solutions, Ceiling Metal Profiles.
- Role: the secondary ceiling member to which the gypsum boards are screwed.
- Section for this size: not specified in the supplied datasheet.
- Profile material: hot-dip galvanised steel, ASTM A653M; length 3000 mm.
- Other sizes listed: 35.
RFQ / BOQ checklist
- Profile and size (Furring Channel 38)
- Steel thickness
- Length and quantity
- Board type and layers the system carries
- Accessories needed (clips, rods, anchors, screws)
- Project location and delivery date
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
Yes. Jawdah's product list gives two furring channel sizes, 35 and 38, and 38 is the larger. The exact section of each is confirmed by Jawdah.
Not by name. It lists a 21x34x21 mm furring channel section but does not link it to size 38, so Jawdah confirms the size 38 section on request.
The datasheet gives 0.35 up to 0.9 mm hot-dip galvanised steel to ASTM A653M, and notes that other thicknesses are available on request.

Next step
Request a quotation for Furring Channel 38
Send the size, quantities and project location. The Jawdah team confirms the technical data for your order and replies with a quotation.
