Jawdah Industrial Co. Ltd.

Secret-Fix Grooved Wall Panels · 75 mm

Secret-Fix Grooved Wall Sandwich Panel — 75 mm

The 75 mm grooved secret-fix panel is the mid-depth version of Jawdah's concealed-fix PIR wall panel with a recessed groove, suited to patterned façades that also need solid insulation.

Thickness
75 mm
R-value (core)
3.26 m²·K/W
U-value (core)
0.31 W/m²·K
Core
Rigid PIR
Secret Fix With Groove Wall Sandwich Panels 75 mm

Overview

Quick answer

Jawdah's 75 mm grooved secret-fix wall panel has a 75 mm rigid PIR core, hidden fasteners and a recessed groove on its face. Its data sheets state R 3.26 m²·K/W and U 0.31 W/m²·K for the core alone. As general guidance it is the balanced choice for grooved external façades of air-conditioned buildings.

Overview

What the 75 mm grooved panel offers

Jawdah's data sheet gives 75 mm an R-value of 3.26 m²·K/W and a U-value of 0.31 W/m²·K. Profile and groove basics are on the secret-fix grooved wall sandwich panel page.

The panel is built from a rigid PIR core bonded between two pre-painted metal skins. Its fasteners pass through the side joint and disappear under the next panel, and a groove recessed into the face marks each module with a shadow line. The 75 mm core gives the grooved range its middle insulation depth.

On a long frontage this combination works well: the groove breaks the elevation into bands, and the deeper core keeps heat gain through the wall well below that of the 50 mm version.

Performance

Upkeep of a 75 mm grooved façade

Fine dust settles in horizontal grooves, so plan periodic washing with water, a mild detergent and a soft brush; vertical grooves shed dust more easily. Avoid abrasive pads and solvent cleaners that can damage the coating, and check joint sealants at each cleaning round. Plan corner and opening trims with the wall flashings range so that they meet the groove lines cleanly.

Applications

Where a 75 mm grooved wall typically fits

As general guidance, mid-depth grooved panels are used on the visible external elevations of air-conditioned buildings: corporate frontages of factories and logistics centres, showrooms, schools and public service buildings. The groove gives the façade scale, and the 75 mm core carries a meaningful share of the envelope's insulation.

For an internal feature wall or a lightly conditioned space, the 50 mm grooved panel may be enough; for a strict envelope target, compare the 100 mm grooved panel.

Choosing

Ordering 75 mm grooved panels

Give the 75 mm thickness, facing, coating, colour, panel lengths and quantities, and mark the groove orientation and the grooved and plain areas on the elevations.

Ask Jawdah for the groove profile drawing, joint details and fixing schedule, and for confirmation of the data sheet that applies.

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Jawdah data

Grooved data-sheet values for 75 mm

Jawdah's data sheet lists 75 mm among three grooved thicknesses and states the thermal row below for it.

  • Thickness: 75 mm on Jawdah's data sheet
  • Core: rigid PIR
  • R 3.26 m²·K/W; U 0.31 W/m²·K, core only
  • Basis: λ = 0.023 W/m·K, calculated not measured
  • Groove details and cover width: confirmed per project

Specifications

Thermal values of the 75 mm grooved panel

The 75 mm core, divided by λ = 0.023 W/m·K, gives R 3.26 m²·K/W; the U-value of 0.31 W/m²·K is the inverse. Surface resistances and thermal bridging sit outside the calculation. The data sheets give no separate figure for the groove recess, so the row applies to the panel as listed.

Grooved secret-fix wall panel 75 mm: thermal values (Jawdah data sheet)
Panel thicknessR-value (m²·K/W)U-value (W/m²·K)
75 mm3.260.31

Thermal values refer to the insulation core only and exclude surface resistances and thermal bridging.

Comparison

75 mm compared with 50 mm and 100 mm grooved panels

Stepping up from 50 mm cuts the core U-value from 0.46 to 0.31 W/m²·K, roughly a third less heat flow. The step from 75 to 100 mm brings it to 0.23 W/m²·K, a smaller gain that also deepens the wall.

Where a smooth, ungrooved face is preferred at this thickness, the secret-fix 75 mm panel carries identical values.

Grooved secret-fix wall panel thicknesses compared (Jawdah data sheet)
Panel thicknessR-value (m²·K/W)U-value (W/m²·K)
50 mm2.170.46
75 mm (this page)3.260.31
100 mm4.350.23

Thermal values refer to the insulation core only and exclude surface resistances and thermal bridging.

Materials

Face finish choices at 75 mm

Facings for the Jawdah wall range are PPGI, aluminium, stainless steel and galvanised iron, coated with polyester or PVDF; Cloud White is the standard colour. On a grooved external façade the coating also has to cope with dust settling in the recesses, so a coating that tolerates regular washing is worth specifying. Confirm with Jawdah which facings are available in the 75 mm grooved profile.

Key facts

  1. Jawdah lists its grooved secret-fix PIR wall panel in 75 mm on its data sheet.
  2. 75 mm grooved secret-fix wall panel: R 3.26 m²·K/W, U 0.31 W/m²·K, core only.
  3. 75 mm is the middle of the grooved thicknesses 50, 75 and 100 mm.
  4. Grooved and plain secret-fix panels share the same thermal values at 75 mm.
  5. Horizontal grooves on façades in dusty climates need periodic washing.
  6. Jawdah confirms groove dimensions and joint details per project.

RFQ / BOQ checklist

  • Panel thickness: 75 mm
  • Facing material, coating and colour
  • Panel lengths and total quantity
  • Groove orientation: vertical or horizontal
  • Elevations marking grooved and plain areas
  • Request for the groove profile drawing and joint details
  • Wind exposure and rail spacing data
  • Corner, window and base trims required
  • Delivery city and installation programme

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • R 3.26 m²·K/W and U 0.31 W/m²·K, from Jawdah's data sheet, calculated for the PIR core alone.

  • Jawdah does not publish a preferred thickness. As general guidance, a mid-depth core suits external walls of conditioned buildings; a thermal calculation confirms the choice.

  • Roughly a third less: U 0.31 against 0.46 W/m²·K under the same conditions.

  • Yes. The grooved and plain secret-fix data sheets both list 75 mm with R 3.26 m²·K/W and U 0.31 W/m²·K.

  • Draw them on the elevation first and align them with openings, floor lines and corners, so the pattern continues around the building.

  • No. Groove width, depth and position are confirmed by Jawdah with the profile drawing for each project.

  • Not on their own. They exclude surface resistances and thermal bridging, so they feed into a full wall calculation.

Next step

Request 75 mm grooved secret-fix panels

Send the 75 mm thickness, facing, colour, quantities and the groove set-out on your elevations. The Jawdah team will confirm the profile, joints and a quotation.