Jawdah Industrial Co. Ltd.

Secret-Fix Wall Panels · 75 mm

Secret-Fix Wall Sandwich Panel — 75 mm

The 75 mm secret-fix wall panel is the middle thickness of Jawdah's concealed-fix PIR wall sandwich panel, pairing hidden fasteners with a deeper core than the 50 mm panel.

Thickness
75 mm
R-value (core)
3.26 m²·K/W
U-value (core)
0.31 W/m²·K
Core
Rigid PIR
Secret Fix Wall Sandwich Panels 75 mm

Overview

Quick answer

Jawdah's 75 mm secret-fix wall panel is a concealed-fix sandwich panel with a 75 mm rigid PIR core. Its data sheets give R 3.26 m²·K/W and U 0.31 W/m²·K for the core alone, about a third less heat flow than the 50 mm panel. It is the middle choice for architectural façades that need a clean face and a balanced insulation depth.

Overview

What the 75 mm secret-fix panel offers

On Jawdah's data sheet, the 75 mm panel has an R-value of 3.26 m²·K/W and a U-value of 0.31 W/m²·K. The concealed-fix principle is covered on the secret-fix wall sandwich panel page.

The panel joins two pre-painted metal facings with a rigid PIR core, and its side joint is shaped to take the fasteners and hide them under the next panel. Its 75 mm core sits between the slim 50 mm option and the 100 mm panel, so it is a natural starting point when a façade must look clean and also carry a real share of the building's thermal performance.

Apart from the core depth, the 75 mm panel shares its fixing principle, facing options and finishes with the other two secret-fix thicknesses.

Applications

Where a 75 mm secret-fix wall typically fits

As general guidance, a mid-range core suits the main external façades of air-conditioned buildings whose elevation should read as one clean surface: office blocks attached to plants, showrooms, commercial frontages and public buildings. It gives noticeably more insulation than 50 mm without the full wall depth of 100 mm.

Jawdah does not assign applications to individual secret-fix thicknesses. Where a project has a strict envelope U-value target, compare the 100 mm secret-fix panel; where the wall is internal or only lightly conditioned, the 50 mm panel may be enough.

Installation

Installation notes for 75 mm concealed-fix walls

Rails must be true and in one plane, and installation runs in one direction from a straight reference line, with the joint line checked every few panels. At 75 mm the panel edge is deeper than at 50 mm, so fasteners and any fixing clips are selected for that depth; the engineer sets the schedule from wind exposure and rail spacing. Plan corner and opening trims with the wall flashings range.

Choosing

Ordering 75 mm secret-fix panels

Include the 75 mm thickness, facing material and coating, colour, panel lengths, quantities and orientation in your request, together with elevations that mark the concealed-fix areas and openings.

Ask Jawdah to send the joint drawing, cover width and fixing schedule for 75 mm, and to confirm the data sheet that applies to the order.

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Jawdah data

Data-sheet facts for the 75 mm thickness

The secret-fix wall panel appears on Jawdah's data sheet, which lists 75 mm and states the thermal values below for it.

  • Thickness: 75 mm, on Jawdah's data sheet
  • Core: rigid polyisocyanurate (PIR)
  • Calculation basis: λ = 0.023 W/m·K
  • R 3.26 m²·K/W and U 0.31 W/m²·K, core only
  • Fasteners concealed in the side joint

Specifications

Thermal values of the 75 mm panel

Dividing the 75 mm core depth by the PIR conductivity gives an R-value of 3.26 m²·K/W; its inverse, the U-value, is 0.31 W/m²·K. Read it as heat flow: about 0.31 watts per square metre of core for each kelvin between the warm and the cool side. The figures are calculated rather than measured and leave out surface resistances, so use them as an input to the wall calculation, not as its result.

Secret-fix wall panel 75 mm: thermal values (Jawdah data sheet)
Panel thicknessR-value (m²·K/W)U-value (W/m²·K)
75 mm3.260.31

Thermal values refer to the insulation core only and exclude surface resistances and thermal bridging.

Comparison

75 mm compared with 50 mm and 100 mm

Going from 50 to 75 mm lowers the core U-value from 0.46 to 0.31 W/m²·K, the largest single improvement within the secret-fix range. The further step to 100 mm reduces it to 0.23 W/m²·K, a smaller gain for the same added depth.

That pattern makes 75 mm a practical balance point. For the same thickness with a recessed shadow line on the face, see the grooved secret-fix 75 mm panel.

Secret-fix wall panel thicknesses compared (Jawdah data sheet)
Panel thicknessR-value (m²·K/W)U-value (W/m²·K)
50 mm2.170.46
75 mm (this page)3.260.31
100 mm4.350.23

Thermal values refer to the insulation core only and exclude surface resistances and thermal bridging.

Materials

Facing and colour choices at 75 mm

Jawdah's wall range is faced with PPGI, aluminium, stainless steel or galvanised iron, coated in polyester or PVDF, with Cloud White as the standard colour. The supplied data does not tie facing options to a thickness, so confirm the combination you need in the concealed-fix profile at 75 mm before the façade colour is approved.

Key facts

  1. Jawdah's secret-fix PIR wall sandwich panel is listed in 75 mm on Jawdah's data sheet.
  2. 75 mm secret-fix wall panel thermal values: R 3.26 m²·K/W and U 0.31 W/m²·K, core only.
  3. 75 mm is the middle of three secret-fix thicknesses: 50, 75 and 100 mm.
  4. Moving from 50 mm to 75 mm lowers the secret-fix core U-value from 0.46 to 0.31 W/m²·K.
  5. The Jawdah secret-fix panel hides its fasteners in the side joint under the next panel.
  6. Jawdah confirms the secret-fix joint drawing, cover width and fixing schedule per project.

RFQ / BOQ checklist

  • Panel thickness: 75 mm
  • Facing material and coating (polyester or PVDF)
  • Colour: Cloud White or the required colour
  • Panel lengths and total quantity
  • Orientation: vertical or horizontal
  • Elevations showing the concealed-fix areas and openings
  • Wind exposure and rail spacing for the fixing schedule
  • Corner, opening and base trims required
  • Delivery city and programme

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • R 3.26 m²·K/W and U 0.31 W/m²·K, from Jawdah's data sheet. They are calculated from the PIR core conductivity of 0.023 W/m·K and cover the core only.

  • The 75 mm core cuts the heat flow through the panel by roughly a third compared with 50 mm, which matters on external façades of buildings that are cooled for long hours.

  • When the thermal target is met at 75 mm, the slimmer panel keeps the wall build-up, window reveals and trims shallower. If the target is not met, 100 mm offers U 0.23 W/m²·K.

  • Yes. Jawdah's secret-fix data sheet lists 75 mm with the thermal values shown on this page.

  • Both are listed in 75 mm with the same thermal values, so mixing plain and grooved bands is possible in principle. Confirm colour, profile and joint compatibility with Jawdah.

  • The structural engineer, from wind exposure, rail spacing and Jawdah's joint data. Concealed fixing does not reduce the number of fasteners needed.

  • No. They exclude surface resistances and thermal bridging at joints and rails. A full wall calculation is needed for compliance.

Next step

Request 75 mm secret-fix wall panels

Send the 75 mm thickness, facing, colour, lengths and quantities with your elevations. The Jawdah team will confirm the joint details, the data sheet and a quotation.