Secret-Fix Wall Panels · 100 mm
Secret-Fix Wall Sandwich Panel — 100 mm
The 100 mm secret-fix wall panel is the thickest concealed-fix PIR wall sandwich panel Jawdah lists, for façades that must look seamless and insulate as much as the range allows.
- Thickness
- 100 mm
- R-value (core)
- 4.35 m²·K/W
- U-value (core)
- 0.23 W/m²·K
- Core
- Rigid PIR

Overview
Quick answer
Jawdah's 100 mm secret-fix wall panel is a concealed-fix sandwich panel with a 100 mm rigid PIR core. Jawdah's data sheet states R 4.35 m²·K/W and U 0.23 W/m²·K for the core, half the heat flow of the 50 mm panel. It is the choice in this range when a clean façade must also meet a demanding thermal target.
Overview
What the 100 mm secret-fix panel is
Jawdah's data sheet gives it an R-value of 4.35 m²·K/W and a U-value of 0.23 W/m²·K. The secret-fix wall sandwich panel page explains the fixing principle; here the focus is the 100 mm thickness.
Like the thinner versions, it is a composite of two pre-painted metal skins and a rigid PIR core, with a side joint that receives the fasteners and is closed by the adjoining panel. The 100 mm core is the deepest in the secret-fix range, so this panel gives the lowest heat flow of the three while keeping the fastener-free face.
The extra depth affects more than insulation: the wall becomes thicker, which changes window reveals, trim sizes and the fastener length at the joint.
Applications
Where a 100 mm secret-fix wall typically fits
As general guidance, the deepest core in a façade range is chosen for external walls of buildings that are cooled for long hours or must meet a strict envelope U-value: corporate offices, showrooms, institutional buildings and the conditioned front blocks of industrial sites.
For refrigerated rooms rather than façades, compare the cold room 100 mm panel, which has the same thermal values on its own data sheet. If 100 mm is more than the target needs, the 75 mm secret-fix panel keeps the wall slimmer.
Installation
Installing 100 mm concealed-fix panels
A deeper panel is heavier to handle, so plan lifting and temporary support, and keep rails straight and in one plane, because the concealed joint cannot be pulled into line with face screws. Fasteners and clips must suit the 100 mm edge, and the engineer sets their schedule from wind exposure and rail spacing. Corner, head and sill trims for this depth come from the wall flashings range.
Choosing
Ordering 100 mm secret-fix panels
State 100 mm, facing and coating, colour, panel lengths, quantities and orientation, and attach elevations that show openings and concealed-fix areas. Trim sizes depend on the wall depth, so list them in the same request.
Ask for the joint drawing, cover width and fixing schedule at 100 mm, and confirm the applicable data sheet with Jawdah.
Technical
Closer look
Detailed product imagery is being prepared.
In preparationJawdah data
Data-sheet facts for 100 mm
Jawdah's data sheet lists the secret-fix wall panel in 50, 75 and 100 mm, and gives the thermal values below for 100 mm.
- Thickness: 100 mm, the deepest listed core
- Core: rigid PIR
- Calculated with λ = 0.023 W/m·K
- R 4.35 m²·K/W; U 0.23 W/m²·K (core only)
- Fixing concealed in the side joint
Specifications
Thermal values of the 100 mm panel
The R-value of 4.35 m²·K/W is the 100 mm core depth divided by the PIR conductivity, and the U-value of 0.23 W/m²·K is its inverse: roughly 0.23 watts pass through each square metre of core for every kelvin of temperature difference. Surface resistances and thermal bridging at rails and joints are not included, so the wall needs its own calculation.
| Panel thickness | R-value (m²·K/W) | U-value (W/m²·K) |
|---|---|---|
| 100 mm | 4.35 | 0.23 |
Thermal values refer to the insulation core only and exclude surface resistances and thermal bridging.
Comparison
100 mm compared with the thinner secret-fix panels
At 0.23 W/m²·K the 100 mm panel passes half the heat of the 50 mm panel (0.46) and about a quarter less than the 75 mm panel (0.31). The facing, coating and fixing principle are the same across all three.
The grooved secret-fix 100 mm panel has the same values with a shadow-line face, which some façades use as bands alongside the plain panel.
| Panel thickness | R-value (m²·K/W) | U-value (W/m²·K) |
|---|---|---|
| 50 mm | 2.17 | 0.46 |
| 75 mm | 3.26 | 0.31 |
| 100 mm (this page) | 4.35 | 0.23 |
Thermal values refer to the insulation core only and exclude surface resistances and thermal bridging.
Materials
Facings and finishes at 100 mm
Facings in the Jawdah wall range are PPGI, aluminium, stainless steel or galvanised iron, with polyester or PVDF coating and Cloud White as standard. On coastal sites such as Jeddah and Dammam, the outer facing and coating deserve as much attention as the core, since they carry the weather; confirm the options for the concealed-fix profile at 100 mm with Jawdah.

Key facts
- Jawdah lists its secret-fix PIR wall sandwich panel in 100 mm on its data sheet.
- 100 mm secret-fix wall panel: R 4.35 m²·K/W and U 0.23 W/m²·K, core only.
- 100 mm is the thickest of the secret-fix thicknesses 50, 75 and 100 mm.
- The 100 mm secret-fix panel has half the core U-value of the 50 mm panel.
- Secret-fix panel fasteners are hidden in the side joint under the adjoining panel.
- Joint geometry, cover width and fixing schedule are confirmed by Jawdah per project.
RFQ / BOQ checklist
- Panel thickness: 100 mm
- Facing material and coating (polyester or PVDF)
- Colour: Cloud White or the required colour
- Panel lengths and total quantity
- Orientation: vertical or horizontal
- Elevations showing the concealed-fix areas and openings
- Wind exposure and rail spacing for the fixing schedule
- Corner, opening and base trims required
- Delivery city and programme
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
0.23 W/m²·K, with an R-value of 4.35 m²·K/W, on Jawdah's data sheet. The values are calculated for the PIR core only from λ = 0.023 W/m·K.
Yes. The secret-fix data sheets list 50, 75 and 100 mm. Thicker cores in Jawdah's data belong to other panels, such as the cold room wall panel.
Its U-value is half that of the 50 mm panel (0.46 W/m²·K), so under the same conditions half as much heat passes through the core.
Yes. As general practice, trims at corners, heads and sills are sized to the wall depth, so order them with the panels to match the 100 mm build-up.
Cold room walls are selected for thermal and hygiene needs, and Jawdah has a dedicated cold room wall panel range with the same 100 mm values. Confirm the right panel with Jawdah.
No. The joint drawing, cover width and fixing schedule are confirmed by the Jawdah team for each project.
No. The data sheets calculate the core only, without surface resistances or thermal bridging at rails and joints. Use a full wall calculation for compliance.

Next step
Request 100 mm secret-fix wall panels
Send the 100 mm thickness, facing, colour, lengths, quantities and trims with your elevations. The Jawdah team will confirm the joint details, data sheet and a quotation.





