Jawdah Industrial Co. Ltd.

Open-Cell Lay-On Tiles · 100 mm

Lay-On Aluminum Open Cell Ceiling – 100 mm (100x100 mm Cell)

The Lay-On Open Cell Ceiling, 100 mm, is the Jawdah aluminium open-cell lay-on tile with the largest listed cell, 100x100 mm.

Cell size
100x100 mm
Panel
600x600 mm
Grid
T-24 & T-15

Overview

Quick answer

The Jawdah Lay-On Open Cell Ceiling, 100 mm, is a 600x600 mm aluminium open-cell tile with 100x100 mm cells for T-24 or T-15 grids. Listed data: alloy 3005 or 3105, 0.45, 0.5 or 0.6 mm, polyester pre-paint 25/5 microns or powder coating 60-80 microns, white or up to 110 colours, and Class 0 for the raw material.

Overview

The most open lattice

Its lattice is the most open of the range, so the ceiling reads as a bold grid with the void clearly visible. It is aimed at tall, large spaces where the ceiling is seen from a distance.

Open-cell lay-on tiles are 600x600 mm panels of interlocked aluminium U-blades that lay on a T-grid. In this item, the 100 mm of the name is the cell size, listed in Jawdah's open-cell data as 100x100 mm, the largest of the three Jawdah cell sizes.

Fewer blades span each panel, so the lattice looks bolder and lighter, and much more of the space above is seen through it. The ceiling becomes a visible frame rather than a screen, which suits architecture where height and volume should be felt.

Performance

Designing with a visible plenum

With a 100 mm cell, the plenum is part of the design. Paint the slab, ducts and cable trays in a dark, uniform colour, align services with the grid, and coordinate light fittings, sprinklers and detectors with the fire and MEP consultants so they read as intentional.

Choose the 50x10 mm U-blade if the lattice should look more substantial at distance; the 40x10 mm blade makes the grid lighter still.

Maintenance

Cleaning and access

A 100 mm cell has the least blade surface per panel of the three sizes, so routine dusting is quicker. The open void, however, collects dust that is visible from below; include the plenum surfaces in the cleaning plan. Tiles lift out of the grid for access.

Applications

Where the 100 mm cell fits

Within the listed applications, malls, supermarkets, halls, shops, offices, airports and exhibition centres, the 100 mm cell is generally chosen for high-volume areas: atriums, concourses, exhibition halls, hypermarket sales floors and large lobbies, where viewing distances are long and a light, open ceiling is preferred over a dense one.

Compatibility

Grid and finishes

The panel lays on Jawdah T-grid systems in T-24 or T-15, metric or imperial. Because more of the grid is seen through a large-cell ceiling, choose a grid colour that matches the tiles. Finishes are polyester pre-paint, 25 microns outside and 5 microns back to EN 1396, or polyester powder coating of 60-80 microns.

Choosing

When to choose the 100 mm cell

Choose the 100 mm cell for tall, large spaces viewed from a distance, where an open, light ceiling and a designed plenum are part of the concept. See the open-cell lay-on tile page for the full range data.

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Specification of the 100 mm cell tile

The table combines the Jawdah open-cell technical data sheet with Jawdah's lay-on tile data. Fire and humidity statements are for the raw material.

Lay-on open-cell tile, 100x100 mm cell
PropertyValue
Cell size100x100 mm (Jawdah open-cell data)
Panel size600x600 mm, metric / imperial
MaterialAluminium alloy 3005, 3105; complying with BS 476 Part 7-1987, ASTM B 209, ASTM D 2247, ASTM E 1477-98 and EN 1396
Thickness0.45 | 0.5 | 0.6 mm; other thicknesses on request
U-size40x10 or 50x10 mm (drop x width)
FinishPre-painted polyester 25 microns outside, 5 microns back (EN 1396); polyester powder coating 60-80 microns
ColoursWhite; up to 110 colours on request
SuspensionT-24 & T-15 T-grid
Fire rating (raw material)Class 0 as per BS 476 Part 7-1987; flame spread index Class 0, smoke developed index 5 as per ASTM E84

Thickness per the open-cell technical data sheet; other thicknesses on request. Confirm with Jawdah.

Comparison

100 mm against the denser cells

The general trade-off is shown below. If the void is crowded or the ceiling is low, the 75 mm cell or 50 mm cell will hide more of it.

The three cell sizes compared (general guidance)
Aspect50x50 mm75x75 mm100x100 mm
Visual densityFinest, densest latticeBalancedMost open lattice
Void visibility at an angleLowestMediumHighest
Blade surface to cleanMostMediumLeast
Typical settingLower ceilings, close viewingGeneral commercial areasHigh volumes, distant viewing

Comparisons follow from cell geometry; no Jawdah test data is implied.

Key facts

  1. The Jawdah Lay-On Open Cell Ceiling, 100 mm, has 100x100 mm cells.
  2. The 100 mm cell is the largest of the three Jawdah open-cell sizes.
  3. The tile is a 600x600 mm aluminium panel for T-24 and T-15 grids.
  4. The open-cell data sheet lists alloy 3005 or 3105 in 0.45, 0.5 and 0.6 mm.
  5. A 100 mm cell leaves more of the plenum visible than the 50 mm or 75 mm cells.
  6. The raw material is stated as Class 0 as per BS 476 Part 7-1987.

RFQ / BOQ checklist

  • Ceiling area and tile quantity
  • Cell size 100x100 mm confirmed
  • U-size: 40x10 or 50x10 mm
  • Thickness: 0.45, 0.5 or 0.6 mm
  • Finish and colour
  • Grid type and grid colour
  • Void colour and services plan
  • Metric or imperial module

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • It is the cell size of the tile, listed in the Jawdah open-cell data as 100x100 mm.

  • In general, in tall spaces with long viewing distances, where an open, light lattice is wanted and the plenum is designed to be seen.

  • Yes, more than with smaller cells. Paint the void in a dark colour and coordinate services with the grid layout.

  • A 600x600 mm panel, metric or imperial, laid on T-24 or T-15 T-grids.

  • Alloy 3005 or 3105, in 0.45, 0.5 or 0.6 mm per the open-cell data sheet, with other thicknesses on request.

  • Polyester pre-paint, 25 microns outside and 5 microns back to EN 1396, or polyester powder coating of 60-80 microns; white standard and up to 110 colours.

  • The raw material is stated as Class 0 as per BS 476 Part 7-1987, with flame spread index Class 0 and smoke developed index 5 per ASTM E84.

Next step

Order 100 mm open-cell tiles

Send area, U-size, finish and grid details. Jawdah will confirm the 100 mm cell tile specification and supply.