Open-Cell Lay-On Tiles · 75 mm
Lay-On Aluminum Open Cell Ceiling – 75 mm (75x75 mm Cell)
The Lay-On Open Cell Ceiling, 75 mm, is the Jawdah aluminium open-cell lay-on tile with the middle cell size of the range, 75x75 mm.
- Cell size
- 75x75 mm
- Panel
- 600x600 mm
- Grid
- T-24 & T-15
- U-size
- 40x10 / 50x10 mm
Overview
Quick answer
The Jawdah Lay-On Open Cell Ceiling, 75 mm, is a 600x600 mm aluminium open-cell tile with 75x75 mm cells for T-24 or T-15 grids. The open-cell data sheet lists alloy 3005 or 3105, 0.45, 0.5 or 0.6 mm thickness, polyester pre-paint or powder coating, white or up to 110 colours, and Class 0 for the raw material.
Overview
The middle cell size
It sits between the dense 50 mm lattice and the open 100 mm grid, which makes it a frequent starting point when a project wants an open-cell character without committing to either extreme.
In an open-cell lay-on tile, U-blades of aluminium are interlocked into a square lattice and supplied as a 600x600 mm panel that rests on the grid. The 75 mm in this item's name is its cell size, which Jawdah's open-cell data lists as 75x75 mm.
A 75 mm cell is open enough for the lattice to read clearly as an open ceiling, yet dense enough that blades still overlap and partly screen the plenum when seen at an angle. It balances texture, openness and cleaning effort, which is why it often fits large mixed-use interiors.
Performance
Getting the 75 mm proportion right
The relationship between cell size and blade drop sets the look. With a 75 mm cell, the 50x10 mm U-blade gives a deeper, more sculpted lattice, while the 40x10 mm U-blade keeps it lighter. Check both on a sample under the project lighting.
Plan the void colour, lighting and sprinkler positions before tiles are ordered. With a medium cell, services are visible at steep angles, so a dark, tidy plenum keeps the ceiling calm.
Applications
Typical uses
Among the listed applications for open-cell lay-on tiles, malls, supermarkets, halls, shops, offices, airports and exhibition centres, the 75 mm cell suits general circulation areas, food courts, open offices and showroom floors, where the ceiling is seen from both near and far and a balanced texture is wanted.
Compatibility
Grid, finishes and mixed ceilings
The tile lays on Jawdah T-24 or T-15 T-grids, so a 75 mm open-cell zone can sit in the same grid as closed metal tiles. Finishes are polyester pre-paint, 25 microns outside and 5 microns back to EN 1396, or polyester powder coating of 60-80 microns; match grid colour to the tile colour so the tee flanges blend into the lattice.
Choosing
When the 75 mm cell is the right choice
Choose the 75 mm cell when a project needs a clearly open ceiling that still controls how much of the plenum is seen, or when one cell size must work across spaces of different heights. Full range data is on the open-cell lay-on tile page.
- Balanced lattice for mixed ceiling heights
- Partial screening of the void at an angle
- Moderate blade surface to clean
- Same grid as closed lay-in tiles
Technical
Closer look
Detailed product imagery is being prepared.
In preparationSpecifications
Specification of the 75 mm cell tile
Values are from the Jawdah open-cell technical data sheet and Jawdah's lay-on tile data; fire statements refer to the raw material.
| Property | Value |
|---|---|
| Cell size | 75x75 mm (Jawdah open-cell data) |
| Panel size | 600x600 mm, metric / imperial |
| Material | Aluminium alloy 3005, 3105; complying with BS 476 Part 7-1987, ASTM B 209, ASTM D 2247, ASTM E 1477-98 and EN 1396 |
| Thickness | 0.45 | 0.5 | 0.6 mm; other thicknesses on request |
| U-size | 40x10 or 50x10 mm (drop x width) |
| Finish | Pre-painted polyester 25 microns outside, 5 microns back (EN 1396); polyester powder coating 60-80 microns |
| Colours | White; up to 110 colours on request |
| Suspension | T-24 & T-15 T-grid |
| Fire rating (raw material) | Class 0 as per BS 476 Part 7-1987; flame spread index Class 0, smoke developed index 5 as per ASTM E84 |
Thickness per the open-cell technical data sheet; other thicknesses on request. Confirm with Jawdah.
Comparison
75 mm against the smaller and larger cells
Use the table to see where the 75 mm cell sits. Pick the 50 mm cell if the ceiling should look denser, or the 100 mm cell if a more open, airy grid suits a tall space.
| Aspect | 50x50 mm | 75x75 mm | 100x100 mm |
|---|---|---|---|
| Visual density | Finest, densest lattice | Balanced | Most open lattice |
| Void visibility at an angle | Lowest | Medium | Highest |
| Blade surface to clean | Most | Medium | Least |
| Typical setting | Lower ceilings, close viewing | General commercial areas | High volumes, distant viewing |
Comparisons follow from cell geometry; no Jawdah test data is implied.

Key facts
- The Jawdah Lay-On Open Cell Ceiling, 75 mm, has 75x75 mm cells.
- The 75 mm cell is the middle of the three Jawdah open-cell sizes.
- The tile is a 600x600 mm aluminium panel for T-24 and T-15 grids.
- The open-cell data sheet lists alloy 3005 or 3105 in 0.45, 0.5 and 0.6 mm.
- Finishes are polyester pre-paint 25/5 microns to EN 1396 or powder coating 60-80 microns.
- The raw material is stated as Class 0 as per BS 476 Part 7-1987.
RFQ / BOQ checklist
- Ceiling area and tile quantity
- Cell size 75x75 mm confirmed
- U-size: 40x10 or 50x10 mm
- Thickness: 0.45, 0.5 or 0.6 mm
- Finish and colour
- Grid type and grid colour
- Metric or imperial module
- Delivery location
Resources
Further chapters in preparation
Technical resources
Technical documentation is being prepared for this product.
Projects using this product
Project references are being prepared.
Compatible systems
Information on compatible systems for this product is being prepared.
Our technical team can share the current information on request.Ask the technical team
FAQ
Frequently asked questions
It is the cell size of the tile, listed in the Jawdah open-cell data as 75x75 mm.
In general it sits between them: more open than 50 mm, denser than 100 mm, with medium screening of the void and a medium amount of blade surface to clean.
It lays on T-24 or T-15 T-grids as a 600x600 mm panel, metric or imperial.
The open-cell data lists U-sizes of 40x10 mm and 50x10 mm (drop x width). Confirm with Jawdah which is combined with the 75 mm cell for your order.
The data sheet lists 0.45, 0.5 and 0.6 mm, with other thicknesses on request. Confirm the final thickness with Jawdah.
Yes. The open-cell data sheet lists polyester powder coating of 60-80 microns as well as the polyester pre-paint.
The raw material is stated as Class 0 as per BS 476 Part 7-1987 and as flame spread index Class 0 with smoke developed index 5 per ASTM E84.

Next step
Order 75 mm open-cell tiles
Send area, U-size, finish and grid. Jawdah will confirm the 75 mm cell tile specification and supply.


