Jawdah Industrial Co. Ltd.

Open-Cell Lay-On Tiles · 50 mm

Lay-On Aluminum Open Cell Ceiling – 50 mm (50x50 mm Cell)

The Lay-On Open Cell Ceiling, 50 mm, is the Jawdah aluminium open-cell lay-on tile with the smallest listed cell, 50x50 mm.

Cell size
50x50 mm
Panel
600x600 mm
Grid
T-24 & T-15
Thickness
0.45 | 0.5 | 0.6 mm

Overview

Quick answer

The Jawdah Lay-On Open Cell Ceiling, 50 mm, is a 600x600 mm aluminium open-cell tile with 50x50 mm cells that lays on T-24 or T-15 grids. The data sheet lists alloy 3005 or 3105, thicknesses of 0.45, 0.5 and 0.6 mm, pre-painted polyester or powder coating, white or up to 110 colours, and a raw-material Class 0 fire statement.

Overview

The smallest cell in the range

Each 600x600 mm panel carries the finest lattice of the range and rests on a T-24 or T-15 grid. It is the choice when an open ceiling should still look dense and screen most of the void above.

Open-cell tiles turn a standard grid into a lattice ceiling: aluminium U-blades slotted together form square cells, and the finished panel lays on the grid like any tile. The 50 mm in the item name is the cell size, listed in Jawdah's open-cell data as 50x50 mm, the smallest of the three sizes Jawdah offers.

A small cell means more blades across the same panel. From below, the ceiling looks finer and more textile-like, and at normal viewing angles the blades overlap visually and hide much of the plenum. This makes the 50 mm cell the most "closed-looking" open ceiling of the range.

Performance

Design points for a 50 mm cell ceiling

Because the lattice is fine, it works well at moderate ceiling heights and in spaces viewed from close by, such as shop floors, office lobbies and corridors. Combine it with the deeper 50x10 mm U-blade where the void must be screened further; the 40x10 mm blade keeps the lattice lighter.

Even with a small cell, paint the void and services in a dark colour, since they remain visible from directly below.

Maintenance

Cleaning a fine lattice

A 50 mm cell has more blade surface per panel than the larger cells, so dust settles on more edges. Clean with a soft brush or a vacuum with a brush head, and lift tiles out of the grid for deeper cleaning. Handle panels by the outer frame to avoid bending the thin blades.

Applications

Where the 50 mm cell is used

Open-cell lay-on tiles are listed for malls, supermarkets, halls, shops, offices, airports and exhibition centres. The 50 mm cell suits the parts of those buildings that are seen at close range or have lower ceilings: retail units, office receptions, corridors and service counters, where a fine texture and a calm, uniform ceiling are wanted.

Compatibility

Grid and finishes

The tile lays on Jawdah T-grid systems in T-24 or T-15, the same grid that carries closed lay-in tiles, so open-cell and closed zones can share one grid layout. Finishes are pre-painted polyester, 25 microns outside and 5 microns back to EN 1396, or polyester powder coating of 60-80 microns.

Choosing

When to choose the 50 mm cell

Choose the 50 mm cell when the ceiling should read as fine and dense, the viewing distance is short, or the plenum is busy and should be screened. For a more open look in high spaces, step up to 75 mm or 100 mm cells. For full specifications of the range, see the open-cell lay-on tile page.

Technical

Closer look

Detailed product imagery is being prepared.

In preparation

Specifications

Specification of the 50 mm cell tile

Values come from the Jawdah open-cell technical data sheet and Jawdah's open-cell lay-on tile data. Fire values are for the raw material.

Lay-on open-cell tile, 50x50 mm cell
PropertyValue
Cell size50x50 mm (Jawdah open-cell data)
Panel size600x600 mm, metric / imperial
MaterialAluminium alloy 3005, 3105; complying with BS 476 Part 7-1987, ASTM B 209, ASTM D 2247, ASTM E 1477-98 and EN 1396
Thickness0.45 | 0.5 | 0.6 mm; other thicknesses on request
U-size40x10 or 50x10 mm (drop x width)
FinishPre-painted polyester 25 microns outside, 5 microns back (EN 1396); polyester powder coating 60-80 microns
ColoursWhite; up to 110 colours on request
SuspensionT-24 & T-15 T-grid
Fire rating (raw material)Class 0 as per BS 476 Part 7-1987; flame spread index Class 0, smoke developed index 5 as per ASTM E84

Thickness per the open-cell technical data sheet; other thicknesses on request. Confirm with Jawdah.

Comparison

How the 50 mm cell compares

The table shows the general effect of cell size. Against the 75 mm cell and 100 mm cell tiles, the 50 mm cell gives the densest look and screens the most void, but adds blade surface to clean.

The three cell sizes compared (general guidance)
Aspect50x50 mm75x75 mm100x100 mm
Visual densityFinest, densest latticeBalancedMost open lattice
Void visibility at an angleLowestMediumHighest
Blade surface to cleanMostMediumLeast
Typical settingLower ceilings, close viewingGeneral commercial areasHigh volumes, distant viewing

Comparisons follow from cell geometry; no Jawdah test data is implied.

Key facts

  1. The Jawdah Lay-On Open Cell Ceiling, 50 mm, has 50x50 mm cells.
  2. It is a 600x600 mm aluminium panel for T-24 and T-15 grids.
  3. The 50 mm cell is the smallest of the three Jawdah open-cell sizes.
  4. The open-cell data sheet lists alloy 3005 or 3105 in 0.45, 0.5 and 0.6 mm.
  5. Finishes are polyester pre-paint 25/5 microns or powder coating 60-80 microns.
  6. The raw material is stated as Class 0 as per BS 476 Part 7-1987.

RFQ / BOQ checklist

  • Ceiling area and tile quantity
  • Cell size 50x50 mm confirmed
  • U-size: 40x10 or 50x10 mm
  • Thickness: 0.45, 0.5 or 0.6 mm
  • Finish: pre-painted or powder coated
  • Colour of tiles and grid
  • Grid type: T-24 or T-15
  • Metric or imperial module

Resources

Further chapters in preparation

In preparation
  • Technical resources

    Technical documentation is being prepared for this product.

  • Projects using this product

    Project references are being prepared.

  • Compatible systems

    Information on compatible systems for this product is being prepared.

Our technical team can share the current information on request.Ask the technical team

FAQ

Frequently asked questions

  • It is the cell size of the tile, listed in the Jawdah open-cell data as 50x50 mm.

  • The panel is 600x600 mm, available in metric or imperial, and lays on T-24 or T-15 grids.

  • In general, a smaller cell gives a denser, finer lattice and hides more of the void at normal viewing angles. It suits lower ceilings and close viewing.

  • The open-cell data sheet lists 0.45, 0.5 and 0.6 mm, with other thicknesses on request. Confirm the final thickness with Jawdah.

  • Pre-painted polyester, 25 microns outside and 5 microns back according to EN 1396, or polyester powder coating of 60-80 microns. White is standard, with up to 110 colours on request.

  • It has more blade surface per panel than larger cells, so cleaning takes longer. A soft brush or a vacuum with a brush head is suitable.

  • The aluminium raw material is stated as Class 0 as per BS 476 Part 7-1987, with flame spread index Class 0 and smoke developed index 5 per ASTM E84.

Next step

Order 50 mm open-cell tiles

Send area, U-size, finish and grid type. Jawdah will confirm the 50 mm cell tile specification and quantities.